1 ANNEX Methodology to determine the CO2 savings of a 12 V efficient alternator in passenger cars and light commercial vehicles with internal combustion engine powertrain (fulfilling the conditions specified in Article 1 by reference to the Worldwide Harmonized Light Vehicle Test Procedure), Decision_act (EU) 2020/174

In forcesince 12 Apr 2021

In order to determine the CO2 savings that can be attributed to the use of a 12 V efficient alternator in a passenger car and light commercial vehicle with internal combustion engine powertrain, it is necessary to specify the following:

(1)

the testing conditions;

(2)

the test equipment;

(3)

the procedure to determine the total efficiency;

(4)

the procedure to determine the CO2 savings;

(5)

the procedure to determine the uncertainty of the CO2 savings.

–

| CO2 savings [g CO2/km]

CO2 | - | Carbon dioxide

CF | - | Conversion factor (l/100 km) - (g CO2/km) [gCO2/l] as defined in Table 3

h | - | Frequency as defined in Table 1

I | - | Current intensity at which the measurement shall be carried out [A]

m | - | Number of measurements of the sample

M | - | Torque [Nm]

n | - | Rotational frequency [min-1] as defined in Table 1

P | - | Power [W]

sηEI | - | Standard deviation of the eco-innovative alternator efficiency [%]

–

| Standard deviation of the eco-innovative alternator efficiency mean [%]

–

| Standard deviation of the total CO2 savings [g CO2/km]

U | - | Test voltage at which the measurement shall be carried out [V]

v | - | Mean driving speed of the Worldwide harmonised Light-duty vehicles Test Cycle (WLTC) [km/h]

VPe | - | Consumption of effective power [l/kWh] as defined in Table 2

–

| Sensitivity of calculated CO2 savings related to the efficiency of the eco-innovative alternator

Δ | - | Difference

η | - | Baseline alternator efficiency [%]

ηEI | - | Efficient alternator efficiency [%]

–

| Mean of the eco-innovative alternator efficiency at operating point i [%]

Index (i) refers to operating point

Index (j) refers to measurement of the sample

EI | - | Eco-innovative

m | - | Mechanical

RW | - | Real-world conditions

TA | - | Type-approval conditions

B | - | Baseline

The testing conditions shall fulfil the requirements specified in ISO 8854:2012 [ISO 8854:2012 Road vehicles – Alternators with regulators – Test methods and general requirements Reference number ISO 8854:2012, published on 1 June 2012.].

The test equipment shall be in accordance with the specifications set out in ISO 8854:2012.

The efficiency of the 12 V efficient alternator shall be determined in accordance with ISO 8854:2012, with the exception of the elements specified in the present paragraph.

The measurements shall be conducted at different operating points i, as defined in Table 1. The alternator current intensity is defined as half of the rated current for all operating points. For each speed the voltage and the output current of the alternator are to be kept constant, the voltage at 14,3 V.

Operating point

i

Holding time

[s]

Rotational frequency

ni [min-1]

Frequency

hi

1 | 1200 | 1800 | 0,25

2 | 1200 | 3000 | 0,40

3 | 600 | 6000 | 0,25

4 | 300 | 10000 | 0,10

The efficiency shall be calculated in accordance with Formula 1.

All efficiency measurements shall be performed consecutively at least five (5) times. The average of the measurements at each operating point () has to be calculated.

The efficiency of the eco-innovative alternator (ηEI) shall be calculated in accordance with Formula 2

The efficient alternator leads to saved mechanical power under real-world conditions (ΔPmRW) and type approval conditions (ΔPmTA) as defined in Formula 3.

ΔPm = ΔPmRW - ΔPmTA

where the saved mechanical power under real-world conditions (ΔPmRW) is calculated in accordance with Formula 4 and the saved mechanical power under type-approval conditions (ΔPmTA) in accordance with Formula 5.

Where:

PRWPower requirement under real-world conditions [W], which is 750W

PTAPower requirement under type-approval conditions [W], which is 350W

ηBEfficiency of the baseline alternator [%], which is 67%

The CO2 savings of the efficient alternator are to be calculated with Formula 6.

Where:

vMean driving speed of the WLTC [km/h], which is 46,60 km/h

VPeConsumption of effective power specified in the following Table 2:

Type of engine | Consumption of effective power (Vpe) [l/kWh]

Petrol/E85 | 0,264

Petrol/E85 Turbo | 0,280

Diesel | 0,220

LPG | 0,342

LPG Turbo | 0,363

Consumption of effective power (Vpe) [m3/kWh]

CNG (G20) | 0,259

CNG (G20) Turbo | 0,275

CF: Factor specified in the following Table 3:

Type of fuel | Conversion factor (CF) [gCO2/l]

Petrol/E85 | 2330

Diesel | 2640

LPG | 1629

Conversion factor (CF) [gCO2/m3]

CNG (G20) | 1795

The statistical errors in the results of the testing methodology caused by the measurements shall be quantified. For each operating point the standard deviation shall be calculated in accordance with Formula 7:

The standard deviation of the efficiency value of the efficient alternator (sηEI) shall be calculated in accordance with Formula 8:

The standard deviation of the alternator efficiency (sηEI) leads to an error in the CO2 savings (). That error shall be calculated in accordance with Formula 9:

It has to be demonstrated for each type, variant and version of a vehicle fitted with the efficient alternator that the error in the CO2 savings calculated in accordance with Formula 9 is not greater than the difference between the total CO2 savings and the minimum savings threshold specified in Article 9(1) of Regulation (EU) No 725/2011 (see Formula 10).

Where:

MTMinimum threshold [gCO2/km]

Total CO2 saving [gCO2/km]

Standard deviation of the total CO2 saving [gCO2/km]

CO2 correction coefficient due to the positive mass difference between the efficient alternator and the baseline alternator. shall be calculated following Table 4:

Petrol/E85 (ΔCO2mP) [g CO2/km] | 0,0277•Δm

Diesel (ΔCO2mD) [g CO2/km] | 0,0383•Δm

LPG (ΔCO2mLPG) [g CO2/km] | 0,0251•Δm

CNG (ΔCO2mCNG(G20)) [g CO2/km] | 0,0209•Δm

In Table 4, ‘Δm’ is the extra mass due to the installation of the efficient alternator. It is the positive difference between the mass of the efficient alternator and the mass of baseline alternator. The mass of the baseline alternator is 7 kg. On the evaluation of the extra mass the manufacturer must hand over verified documentation to the type-approval authority.

The report shall include:

Model and mass of the tested alternators

Description of the bench

Test results (measured values)

Calculated results and corresponding formulae.

The type-approval authority shall certify the CO2 savings based on measurements of the efficient alternator and the baseline alternator using the test methodology set out in this Annex. Where the CO2 emission savings are below the threshold specified in Article 9(1), the second subparagraph of Article 11(2) of Regulation (EU) No 725/2011 shall apply.

  • celex=32011R0725