1 ANNEX, Regulation (EU) 2019/804

In forcesince 25 Sep 2022

[Details of the analytical methods are available at the following address of the European Union Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en]

Identification number of the additive | Name of the holder of authorisation | Additive | Composition, chemical formula, description, analytical method. | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation

Selenium in mg/kg of complete feed with a moisture content of 12 %

Category of nutritional additives. Functional group: compounds of trace elements

3b810 | — | Selenised yeast Saccharomyces cerevisiae CNCM I-3060, inactivated |

Additive composition

Preparation of organic selenium:

Content of selenium: 2000 to 2400 mg Se/kg

Organic selenium > 97 to 99 % of total selenium

Selenomethionine > 63 % of total selenium

All species | — | | 0,50 (total) |

1.

The additive shall be incorporated into feed in the form of a premixture.

2.

The directions for use of the additive and premixtures shall indicate the storage and stability conditions.

3.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment.

4.

Maximum supplementation with organic selenium:

0,2 mg Se/kg of complete feed with a moisture content of 12 %.

9 June 2029

Characterisation of the active substance

Selenomethionine produced by Saccharomyces cerevisiae CNCM I-3060

Chemical formula: C5H11NO2Se

Analytical method:

For the determination of selenomethionine in the feed additive:

reversed phase high performance liquid chromatography with UV detection (RP-HPLC-UV) or

high performance liquid chromatography and inductively coupled plasma mass spectrometry (HPLC-ICPMS) after triple proteolytic digestion.

For the determination of total selenium in the feed additive:

inductively coupled plasma atomic emission spectrometry (ICP-AES) or

inductively coupled plasma mass spectrometry (ICPMS).

For the determination of total selenium in premixtures, compound feed and feed materials:

hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (EN 16159:2012).

3b810i | — | Selenised yeast Saccharomyces cerevisiae CNCM I-3060, inactivated |

Additive composition

Preparation of organic selenium:

Content of selenium 3000-3500 mg Se/kg

Organic selenium > 97 to 99 % of total selenium

Selenomethionine > 63 % of total selenium

All species | — | | 0,50 (total) |

1.

The additive shall be incorporated into feed in the form of a premixture.

2.

The directions for use of the additive and premixtures shall indicate the storage and stability conditions.

3.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection.

4.

Maximum supplementation with organic selenium:

0,2 mg Se/kg of complete feed with a moisture content of 12 %.

5.

The dusting potential of the additive shall ensure a maximal Se exposure of 0,2 mg Se/m3

9 June 2029

Characterisation of the active substance

Selenomethionine produced by Saccharomyces cerevisiae CNCM I-3060

Chemical formula: C5H11NO2Se

Analytical method

For the determination of selenomethionine in the feed additive:

reversed phase high performance liquid chromatography with UV detection (RP-HPLC-UV) or

high performance liquid chromatography and inductively coupled plasma mass spectrometry (HPLC-ICPMS) after triple proteolytic digestion.

For the determination of total selenium in the feed additive:

inductively coupled plasma atomic emission spectrometry (ICP-AES) or

inductively coupled plasma mass spectrometry (ICPMS).

For the determination of total selenium in premixtures, compound feed and feed materials:

hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (EN 16159:2012).

3b811 | — | Selenised yeast Saccharomyces cerevisiae NCYC R397, inactivated |

Preparation of organic selenium:

Content of selenium: 2000 to 3500 mg Se/kg

Organic selenium > 98 % of total selenium

Selenomethionine > 63 % of total selenium

Selenomethionine produced by Saccharomyces cerevisiae NCYC R397

Chemical formula: C5H11NO2Se

For the determination of selenomethionine in the feed additive:

reversed phase high performance liquid chromatography with UV detection (RP-HPLC-UV) or

high performance liquid chromatography and inductively coupled plasma mass spectrometry (HPLC-ICPMS) after triple proteolytic digestion.

For the determination of total selenium in the feed additive:

inductively coupled plasma atomic emission spectrometry (ICP-AES) or

inductively coupled plasma mass spectrometry (ICPMS).

For the determination of total selenium in premixtures, compound feed and feed materials:

hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (EN 16159:2012).

All species | — | | 0,50 (total) |

1.

The additive shall be incorporated into feed in the form of a premixture.

2.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal, mucosae or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

3.

In the directions for use of the additive and premixtures, indicate the storage and stability conditions.

4.

Maximum supplementation with organic selenium:

0,20 mg Se/kg of complete feed with a moisture content of 12 %.

9 June 2029

Changed on 25 Sep 2022

[Details of the analytical methods are available at the following address of the European Union Reference Laboratory: http://irmm.jrc.https://joint-research-centre.ec.europa.eu/EURLs/EURL_feed_additives/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/evaluation_reports/Pages/index.aspxeurl-fa-evaluation-reports_en]

Additive composition

All species | — | | 0,50 (total) | 1. The additive shall be incorporated into feed in the form of a premixture. 2. The directions for use of the additive and premixtures shall indicate the storage and stability conditions. 3. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment. 4. Maximum supplementation with organic selenium: 0,2 mg Se/kg of complete feed with a moisture content of 12 %. 9 June 2029 Characterisation of the active substance

Analytical method:

3b810i | — | Selenised yeast Saccharomyces cerevisiae CNCM I-3060, inactivated | Additive composition Preparation of organic selenium: Content of selenium 3000-3500 mg Se/kg Organic selenium > 97 to 99 % of total selenium Selenomethionine > 63 % of total selenium

2. The directions for use of the additive and premixtures shall indicate the storage and stability conditions. 3. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection. 3. In the directions for use of the additive and premixtures, indicate the storage and stability conditions.

0,202 mg Se/kg of complete feed with a moisture content of 12 %. 5. The dusting potential of the additive shall ensure a maximal Se exposure of 0,2 mg Se/m3

Characterisation of the active substance Selenomethionine produced by Saccharomyces cerevisiae CNCM I-3060 Chemical formula: C5H11NO2Se Analytical method For the determination of selenomethionine in the feed additive: reversed phase high performance liquid chromatography with UV detection (RP-HPLC-UV) or high performance liquid chromatography and inductively coupled plasma mass spectrometry (HPLC-ICPMS) after triple proteolytic digestion. For the determination of total selenium in the feed additive: inductively coupled plasma atomic emission spectrometry (ICP-AES) or inductively coupled plasma mass spectrometry (ICPMS). For the determination of total selenium in premixtures, compound feed and feed materials: hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (EN 16159:2012).

  1. 25 Sep 2022 – todayin force
  2. 17 May 2019 – 25 Sep 2022earlier wording