The regulated entity shall determine the released fuel amounts of a fuel stream in one of the following ways:
where the regulated entities and the fuel streams covered correspond to entities with reporting obligations under and energy products subject to national legislation transposing Directives 2003/96/EC and (EU) 2020/262, on the basis of the measurement methods used for the purposes of those acts when those methods are based on national metrological control;
on the basis of aggregation of measurement of quantities at the point where the fuel streams are released for consumption;
on the basis of continual measurement at the point where the fuel streams are released for consumption.
However, the competent authorities may require the regulated entities to use, where applicable, only the method referred to in the first subparagraph, point (a).
Where it is technically not feasible or would incur unreasonable costs to determine released fuel amounts for the entire calendar year, and subject to the approval by the competent authority, the regulated entity may choose the next most appropriate day to separate one monitoring year from the subsequent year, and reconcile accordingly to the calendar year required. The deviations involved for one or more fuel streams shall be documented in the monitoring plan, clearly recorded, form the basis of a value representative for the calendar year, and be considered consistently in relation to the next year. The Commission may provide the relevant guidelines.
When determining the released fuel amounts in accordance with paragraph 1, point (b) and (c) of this Article, Articles 28 and 29 shall apply, with the exception of Article 28(2), second subparagraph, second sentence and third subparagraph. For that purpose, any reference to operator or installation is to be read as if it were a reference to the regulated entity.
The regulated entity may simplify the uncertainty assessment by assuming that the maximum permissible errors specified for the measuring instrument in service is to be regarded as the uncertainty over the whole reporting period as required by the tier definitions in Annex IIa.
By way of derogation from Article 75h, where the method referred to in point (a) of paragraph 1 of this Article is used, the regulated entity may determine the released fuel amounts without using tiers. The competent authorities shall report to the Commission by 30 June 2026 on the practical application and levels of uncertainty of the method referred to in that point.