1 ANNEX, Decision_act (EU) 2018/1702

In forcesince 8 Nov 2018
1.

Excluded or limited substances

2.

Additional aquatic toxicity requirements

3.

Biodegradability and bioaccumulative potential

4.

Renewable ingredients requirements

5.

Packaging/container requirements

6.

Minimum technical performance

7.

Consumer information regarding use and disposal

8.

Information appearing on the EU Ecolabel

The specific assessment and verification requirements are indicated within each criterion.

Where the applicant is required to provide the competent bodies with declarations, documentation, analyses, test reports, or other evidence to show compliance with the criteria, these may originate from the applicant and/or their supplier(s), as appropriate.

Competent bodies shall preferentially recognise attestations which are issued by bodies accredited in accordance with the relevant harmonised standard for testing and calibration laboratories (General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)) or with the principles of Good Laboratory Practice (GLP); and verifications by bodies that are accredited in accordance with the relevant harmonised standard for bodies certifying products, processes and services. Accreditation shall be carried out in accordance with Regulation (EC) No 765/2008 of the European Parliament and of the Council [Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 (OJ L 218, 13.8.2008, p. 30).].

Where appropriate, test methods other than those indicated for each criterion may be used if the competent body assessing the application accepts their equivalence.

Where appropriate, competent bodies may require supporting documentation and may carry out independent verifications or site visits.

As a prerequisite, the product shall meet all applicable legal requirements of the country or countries in which the product is intended to be placed on the market. The applicant shall declare the product's compliance with this requirement.

The Lubricant Substance Classification list (LuSC list), available on the EU Ecolabel website [http://ec.europa.eu/environment/ecolabel/], contains substances and brands that have been assessed by a competent body with regard to the relevant requirements included in this Decision and the data can be used directly in the application process.

A Letter of Compliance issued by one of the EU Ecolabel competent bodies can be used directly in the application process.

A list of all intentionally added substances and/or formed intentionally after any chemical reaction in the applied lubricant at or above the concentration of 0,010 % weight by weight in the final product shall be provided to the competent body, indicating the trade name (if existing), the chemical name, the CAS No, the ingoing quantity, the function and the form present in the final product formulation. All listed substances present in the form of nanomaterials shall be clearly indicated on the list with the word ‘nano’ written in brackets.

For each substance listed, the Safety Data Sheets (SDS) in accordance with Regulation (EC) No 1907/2006 of the European Parliament and of the Council [Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).] shall be provided. Where an SDS is not available for a single substance because it is part of a mixture, the applicant shall provide the SDS of the mixture.

Compliance with the ecological criteria is required for the final product and its constituent substances that are intentionally added and/or formed intentionally after any chemical reaction in the applied lubricant as indicated within each criterion.

In addition, the total fraction of the listed substances where the formulated criteria 2 and 3 do not apply shall remain below 0,5 % (w/w).

Note: Where grease can be used as both TLL and PLL (as in the case of multifunctional grease), criteria applicable to the TLL sub-group shall apply. If grease can be used as PLL and ALL, but not as TLL, then the criteria applicable to the PLL sub-group shall apply.

For gear oils used in open gears criteria applicable to the PLL sub-group shall apply while for gear oils used in closed gears criteria applicable to the ALL sub-group shall apply. When a gear oil can be used in both types of gears criteria applicable to the PLL sub-group shall apply.

For the purpose of criterion 1 impurities stated in the SDS, whose presence in the final product equals or exceeds 0,010 %, shall comply with the same requirements as the intentionally added substances.

The final product shall not be classified in accordance with any of the hazard statements included in Table 1.

Substances that meet the criteria for classification with the hazard statements listed in Table 1 shall not be intentionally added or formed in the final product as specified by the respective limit values.

Where stricter, the generic or specific concentration limits determined in accordance with Article 10 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council [Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 (OJ L 353, 31.12.2008, p. 1).] shall take precedence.

Hazard statement | Limit value

H340 May cause genetic defects | ≤ 0,010 % weight by weight per substance in the final product

H350 May cause cancer

H350i May cause cancer by inhalation

H360F May damage fertility

H360D May damage the unborn child

H360FD May damage fertility. May damage the unborn child

H360Fd May damage fertility. Suspected of damaging the unborn child

H360Df May damage the unborn child. Suspected of damaging fertility

H341 Suspected of causing genetic defects

H351 Suspected of causing cancer

H361f Suspected of damaging fertility

H361d Suspected of damaging the unborn child

H361fd Suspected of damaging fertility. Suspected of damaging the unborn child

H362 May cause harm to breast-fed children

H300 Fatal if swallowed (oral)

H310 Fatal in contact with skin (dermal)

H330 Fatal if inhaled (inhal.)

H304 May be fatal if swallowed and enters airways | ≤ 0,5 × Final product classification limit for H304

H301 Toxic if swallowed | < Final product classification limit for H301

H311 Toxic in contact with skin | < Final product classification limit for H311

H331 Toxic if inhaled | < Final product classification limit for H331

EUH070 Toxic by eye contact | ≤ 0,010 % weight by weight per substance in the final product

H370 Causes damage to organs

H372 Causes damage to organs through prolonged or repeated exposure

H371 May cause damage to organs

H373 May cause damage to organs through prolonged or repeated exposure | < Final product classification limit for H373

H335 May cause respiratory irritation | ≤ 0,010 % weight by weight per substance in the final product

H336 May cause drowsiness or dizziness | < Final product classification limit for H336

H317: May cause allergic skin reaction | < Final product classification limit for H317

H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled | ≤ 0,010 % weight by weight per substance in the final product

H314 Causes severe skin burns and eye damage | < Final product classification limit for H314

H315 Causes skin irritation | < Final product classification limit for H315

H318: Causes serious eye damage | < Final product classification limit for H318

H319 Causes serious eye irritation | < Final product classification limit for H319

H400 Very toxic to aquatic life | ≤ 0,5 × Final product classification limit for H400

H410 Very toxic to aquatic life with long-lasting effects | ≤ 0,5 × Final product classification limit for H410

H411 Toxic to aquatic life with long-lasting effects | < Final product classification limit for H412 and H413

H412 Harmful to aquatic life with long-lasting effects

H413 May cause long-lasting effects to aquatic life

H420 Harms public health and the environment by destroying ozone in the upper atmosphere | ≤ 0,010 % weight by weight per substance in the final product

EUH029 Contact with water liberates toxic gas

EUH031 Contact with acids liberates toxic gas

EUH032 Contact with acids liberates very toxic gas

EUH066 Repeated exposure may cause skin dryness or cracking | < Final product classification limit for EUH066

Note: where final product classification limit (or 0,5 × Final product classification limit) is mentioned, the maximum total concentration of all classified substances with the specific hazard statement(s) shall be considered.

This criterion does not apply to substances covered by Article 2(7)(a) and (b) of Regulation (EC) No 1907/2006 which sets out criteria for exempting substances within Annexes IV and V to that Regulation from the registration, downstream user and evaluation requirements. In order to determine whether that exclusion applies, the applicant shall screen any intentionally added/formed substance at or above the concentration of 0,010 % weight by weight in the final product.

The substances listed below shall not be intentionally added or formed at or above the concentration of 0,010 % weight by weight in the final product:

Substances appearing in the Union List of priority substances in the field of water policy in Annex X to Directive 2000/60/EC of the European Parliament and of the Council [Directive 2000/60/EC of the European Parliament and of the Council of 23 October 2000 establishing a framework for Community action in the field of water policy (OJ L 327, 22.12.2000, p. 1).] as amended by Decision No 2455/2001/EC [Decision No 2455/2001/EC of the European Parliament and of the Council of 20 November 2001 establishing the list of priority substances in the field of water policy and amending Directive 2000/60/EC (OJ L 331, 15.12.2001, p. 1).] and the OSPAR List of Chemicals for Priority Action (http://www.ospar.org/work-areas/hasec/chemicals/priority-action),

Organic halogen compounds and nitrite compounds,

Metals or metallic compounds with the exception of sodium, potassium, magnesium and calcium. In the case of thickeners, also lithium and/or aluminium compounds may be used up to concentrations limited by the other criteria included in the Annex to this Decision.

The final product shall not contain any intentionally added/formed substances that have been identified in accordance with the procedure described in Article 59(1) of Regulation (EU) No 1907/2006, which establishes the candidate list for substances of very high concern at or above the concentration of 0,010 % weight by weight in the final product.

The applicant shall provide a signed declaration of compliance with above sub-requirements, supported by declarations from suppliers, if appropriate; and the following supporting evidence:

To demonstrate compliance with 1(a)(i) the applicant shall provide the SDS of the final product.

To demonstrate compliance with 1(a)(ii), 1(b) and 1(c) the applicant shall provide:

SDS of intentionally added mixtures and their concentration in the final product,

SDS of intentionally added substances and their concentration in the final product.

For substances exempted from requirement 1(a)(ii) (see Annexes IV and V to Regulation (EC) No 1907/2006), a declaration to this effect by the applicant shall suffice to comply.

For requirement 1(c) reference to the latest list of substances of very high concern shall be made on the date of application.

The above evidence can also be provided directly to Competent Bodies by any supplier in the applicant's supply chain.

The applicant shall demonstrate compliance by meeting the requirements of either criterion 2.1 or 2.2.

The critical concentration for the aquatic toxicity for both the freshly prepared lubricant and for each main component shall not be lower than the values specified in Table 2.

Main component means any substance accounting for more than 5 % by weight of the lubricant.

ALL | PLL | TLL

Aquatic toxicity for the freshly prepared lubricant | Critical concentration for acute aquatic toxicity OR | > 100 mg/l | > 1000 mg/l | > 1000 mg/l

Chronic aquatic toxicity | > 10 mg/l | > 100 mg/l | > 100 mg/l

Aquatic toxicity for each main component | Critical concentration for acute aquatic toxicity OR | > 100 mg/l

Chronic aquatic toxicity | > 10 mg/l

Available acute aquatic toxicity test data for each main component shall be provided on each of the following two trophic levels:

crustacean (daphnia preferred),

aquatic plants (algae preferred).

In case acute aquatic toxicity test data is missing in one or both trophic levels, available test data on chronic aquatic toxicity for both the crustacean (daphnia preferred) and fish trophic level shall be accepted.

QSARs could be used to fill data gaps for chronic toxicity or for acute toxicity in only one of the relevant trophic levels.

In case the aforementioned test data is not available for each main component, a test shall be performed to generate data for acute toxicity in the missing trophic level/s (i.e. crustacean and/or aquatic plants).

Available acute aquatic toxicity test data for the lubricant shall be provided on each of the following three trophic levels:

crustacean (daphnia preferred),

aquatic plants (algae preferred),

fish.

In case acute aquatic toxicity test data for the applied lubricant is missing for any of the mentioned trophic levels available test data on chronic aquatic toxicity shall be accepted for the missing trophic level/s.

In case the above data is not available for the applied lubricant, a test shall be performed to generate data on acute aquatic toxicity for the missing trophic level/s.

Substances exhibiting a certain degree of aquatic toxicity are allowed up to a cumulative mass concentration indicated in Table 3.

[M-factors for highly toxic components of mixtures shall be applied in accordance with Article 10 of Regulation (EC) No 1272/2008 as described in Section 4.1.3.5.5.5 of Annex I to that Regulation.]

Cumulative mass percentage (% weight by weight in the final product)

ALL | PLL | TLL

Acute aquatic toxicity > 100 mg/l or

Chronic aquatic toxicity > 10 mg/l

Not limited

Acute aquatic toxicity > 10 to ≤ 100 mg/l or

1 mg/l < Chronic aquatic toxicity ≤ 10 mg/l

≤ 10

(≤ 20 for ALL greases)

≤ 10

(≤ 15 for PLL greases)

≤ 2

(≤ 10 for TLL greases)

Acute aquatic toxicity > 1 to ≤ 10 mg/l or

0,1 mg/l < Chronic aquatic toxicity ≤ 1 mg/l

≤ 2,5

(≤ 1 for ALL greases)

≤ 0,6 | ≤ 0,4

Acute aquatic toxicity≤ 1 mg/l or

Chronic aquatic toxicity ≤ 0,1 mg/l

≤ 0,1/M | ≤ 0,1/M | ≤ 0,1/M

Available chronic aquatic toxicity test data for each substance (each intentionally added or formed substances at or above 0,10 % weight by weight in the final product) shall be provided for each of the following two trophic levels:

crustacean (daphnia preferred), and

fish

In case chronic aquatic toxicity test data is missing in one or both trophic levels, available data on acute aquatic toxicity for both trophic levels, crustacean (daphnia preferred) and aquatic plants (algae preferred) shall be accepted.

QSARs could be used to fill data gaps for chronic toxicity or for acute toxicity in only one of the relevant trophic levels.

In case the above data is not available for each substance, a test shall be performed to generate data for acute toxicity in the missing trophic level/s (i.e. crustacean and/or aquatic plants).

In case of self-assessment by the applicant, for each substance, main component or for the lubricant, the applicant shall provide test reports or literature data including the references demonstrating compliance with the requirements set in sub-criterion 2.1 or 2.2.

For each substance or main component where the assessment is based on a valid letter of compliance (LoC), a copy of the letter shall be provided. For each substance or main component selected from the Lubricant Substance Classification list (LuSC-list) the assessment can be based on the information reported in said list and no documents need to be submitted.

Either marine or freshwater toxicity data are accepted.

Acute aquatic toxicity data (available or generated for the application) shall originate from tests carried out according to:

ISO 10253 or ISO 8692 or OECD Test Guideline 201 or Part C.3 of the Annex to Commission Regulation (EC) No 440/2008 [Commission Regulation (EC) No 440/2008 of 30 May 2008 laying down test methods pursuant to Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) (OJ L 142, 31.5.2008, p. 1).] for algae,

ISO 6341 or OECD Test Guideline 202 or Part C.2 of the Annex to Regulation (EC) No 440/2008 for daphnia,

ISO 7346 or OECD Test Guideline 203 or Part C.1 of the Annex to Regulation (EC) No 440/2008 for fish (only applies to available existing data),

fish embryo toxicity (FET) (non-animal alternative) test according to OECD Test Guideline 236 or part C.49 of the Annex to Regulation (EC) No 440/2008 for fish (only applies when a test needs to be performed for the application).

Only acute aquatic toxicity (72 or 96 hr) ErC50 for algae, (48hr) EC50 for daphnia and (96hr) LC50 for fish are accepted.

Chronic aquatic toxicity data (available) shall originate from tests carried out according to:

ISO 10253 or ISO 8692 or OECD Test Guideline 201 or Part C.3 of the Annex to Regulation (EC) No 440/2008 for algae,

Part C.20 of the Annex to Regulation (EC) No 440/2008 or OECD Test Guideline 211 for daphnia,

OECD Test Guideline 215 or Part C.14 of the Annex to Regulation (EC) No 440/2008 or ISO 12890 or OECD Test Guideline 212 or part C.15 of the Annex to Regulation (EC) No 440/2008 or OECD Test Guideline 210 for fish.

Only chronic toxicity data in the form of No Observed Effect Concentration (NOEC) data shall be accepted.

When QSARs are used to fill data gaps, the applicant shall provide the prediction generated for the target chemical. Results of (Q)SARs shall only be accepted if documentation on the validity and applicability domain of the applied model is provided by the applicant.

In the case of slightly soluble substances or mixtures (< 10 mg/l) the method of the water-accommodated fraction (WAF) can be used in the aquatic toxicity determination. The established loading level referred to as LL50 and related to the lethal loading or the EL50 related to the effective loading for acute aquatic toxicity and NOELR related to the no observable effect loading rate for chronic aquatic toxicity may be used directly in the classification criteria. The preparation of a water-accommodated fraction shall follow the recommendations set out according to one of the following guidelines: Appendix C to ECETOC Technical Report No 26 (1996), OECD 2002 Guidance Document on Aquatic Toxicity Testing of Difficult Substances and Mixtures (OECD Series on Testing and Assessment, No 23), ISO 5667-16 Water quality — Sampling — Part 16 (Guidance on biotesting of samples), ASTM D6081-98 (Standard practice for Aquatic Toxicity Testing for Lubricants: Sample Preparation and Results Interpretation) or equivalent methods. In addition, demonstration of the absence of toxicity for a substance at its limit of water solubility shall be deemed to have met the requirements of this criterion.

The following substances are exempted from requirements 2.1 and 2.2:

any substance which is unlikely to cross biological membranes MM > 800 g/mol and with a molecular diameter > 1,5 nm (> 15 Å), or

any substance which is a polymer and whose molecular weight fraction below 1000 g/mol is less than 1 %, or

any substance which is highly insoluble in water (water solubility < 10 μg/l)

The water solubility of substances shall be determined where appropriate according to OECD Test Guideline 105 or Part A.6 of the Annex to Regulation (EC) No 440/2008 or equivalent test methods.

A polymer molecular weight fraction below 1000 g/mol shall be determined according to Part A.19 of the Annex to Regulation (EC) No 440/2008 or OECD Test Guideline 119 or equivalent test methods.

Requirements for the biodegradability of organic compounds and bioaccumulative potential shall be fulfilled by each intentionally added or formed substance at or above the concentration of 0,10 % weight by weight in the final product.

The lubricant shall not contain substances that are both non-biodegradable and (potentially) bioaccumulative. However, the lubricant may contain one or more substances with a certain degree of degradability and potential or actual bioaccumulation up to a cumulative mass concentration as indicated in Table 4.

ALL | PLL | TLL |

Greases

(ALL,PLL,TLL)

Readily aerobically biodegradable | > 90 | > 75 | > 95 | > 80

Inherently aerobically biodegradable | ≤ 10 | ≤ 25 | ≤ 5 | ≤ 20

Non-biodegradable and non-bioaccumulative | ≤ 5 | ≤ 20 | ≤ 5 | ≤ 15

Non-biodegradable and bioaccumulative | ≤ 0,1 | ≤ 0,1 | ≤ 0,1 | ≤ 0,1

For each substance where the assessment is carried out by the applicant, test reports or literature data including the references on the biodegradability and when required on the (potential) bioaccumulation shall be provided.

For each substance where the assessment is based on a valid letter of compliance (LoC), only a copy of the letter shall be provided.

For each substance selected from the Lubricant Substance Classification list (LuSC-list) the assessment can be based on the information reported in said list and no documents need to be submitted.

‘Inherently biodegradable’ means a substance, which achieves the following level of degradation:

> 70 % after 28 days for inherent biodegradation test, or

> 20 % but < 60 % after 28 days in tests based on oxygen depletion or carbon dioxide generation.

Inherent biodegradability shall be measured in accordance with the following tests:

Regulation (EC) No 440/2008 (Part C.9 of the Annex), OECD 302 or equivalent methods,

tests based on oxygen depletion or carbon dioxide generation: Regulation (EC) No 440/2008 (Part C.4 of the Annex), OECD 306, OECD 310, or equivalent methods.

This article is long: the rest is at the official publication.