Measurement of the mass of gas consumed during the cycle shall be done by a fuel weighing system capable of measuring the weight of the storage container during the test in accordance with the following:
An accuracy of ± 2 per cent of the difference between the readings at the beginning and at the end of the test or better.
Precautions shall be taken to avoid measurement errors.
Such precautions shall at least include the careful installation of the device in accordance with the instrument manufacturer's recommendations and to good engineering practice.
Other measurement methods are permitted if an equivalent accuracy can be demonstrated.
The fuel consumption value shall be calculated from the emissions of hydrocarbons, carbon monoxide, and carbon dioxide determined from the measurement results assuming that only the gaseous fuel is burned during the test.
The gas ratio of the energy consumed in the cycle shall be determined using the following equation:
GgasMgas cf104FCnorm distρ
where:
Ggasis the gas energy ratio, per cent;
Mgasis the mass of the gaseous fuel consumed during the cycle, kg;
FCnormis the fuel consumption (l/100 km for LPG, m3/100 km for NG/biomethane) calculated in accordance with paragraphs 6.6. and 6.7. of Sub-Annex 7;
distis the distance recorded during the cycle, km;
ρ
is the gas density:
ρ = 0,654 kg/m3 for NG/Biomethane;
ρ = 0,538 kg/litre for LPG;
cf
is the correction factor, assuming the following values:
cf = 1 in the case of LPG or G20 reference fuel;
cf = 0,78 in the case of G25 reference fuel.