The essential characteristics of the vehicle family shall be those specified in Appendix 2 to Annex 11 to UN/ECE Regulation No 83.
46 Appendix 2, Regulation (EU) 2017/1151
Changed on 1 Jan 2019
The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, must show sufficient detail.
If the systems, components or separate technical units have electronic controls, information concerning their performance must be supplied.
0.1. Make (trade name of manufacturer): …
0.2. Type: …
0.2.1. Commercial name(s), if available: …
0.5. Name and address of manufacturer: …
Name and address of authorised representative, if any: …
0.7. In the case of components and separate technical units, location and method of affixing of the EC approval mark: …
0.8. Address(es) of assembly plant(s): …
1.1. Make and type of the replacement pollution control device: …
1.2. Drawings of the replacement pollution control device, identifying in particular all the characteristics referred to under point 8 of Article 2 of this essential characteristics of the vehicle family shall be those specified in Appendix 2 to Annex 11 to UN/ECE Regulation: …
1.3. Description of the vehicle type or types for which the replacement pollution control device is intended: …
1.3.1. Number(s) and/or symbol(s) characterising the engine and vehicle type(s): …
1.3.2. Is the replacement pollution control device intended to be compatible with OBD requirements (Yes/No) [Delete where not applicable.]
1.4. Description and drawings showing the position of the replacement pollution control device relative to the engine exhaust manifold(s): … No 83.
- 1 Jan 2019 – 1 Sep 2023earlier wording
- 27 Jul 2017 – 1 Jan 2019earlier wording
- 1 Jun 2017 – 27 Jul 2017earlier wording