[Commission Delegated Regulation (EU) 2017/590 of 28 July 2016 supplementing Regulation (EU) No 600/2014 of the European Parliament and of the Council with regard to regulatory technical standards for the reporting of transactions to competent authorities (see page 449 of this Official Journal).]
SYMBOL | DATA TYPE | DEFINITION
{ALPHANUM-n} | Up to n alphanumerical characters | Free text field.
{CURRENCYCODE_3} | 3 alphanumerical characters | 3 letter currency code, as defined by ISO 4217 currency codes
{DATE_TIME_FORMAT} | ISO 8601 date and time format |
Date and time in the following format:
YYYY-MM-DDThh:mm:ss.ddddddZ.
‘YYYY’ is the year;
‘MM’ is the month;
‘DD’ is the day;
‘T’ — means that the letter ‘T’ shall be used
‘hh’ is the hour;
‘mm’ is the minute;
‘ss.dddddd’ is the second and its fraction of a second;
Z is UTC time.
Dates and times shall be reported in UTC.
{DATEFORMAT} | ISO 8601 date format |
Dates shall be formatted by the following format:
YYYY-MM-DD.
{DECIMAL-n/m} | Decimal number of up to n digits in total of which up to m digits can be fraction digits |
Numerical field for both positive and negative values.
decimal separator is ‘.’ (full stop);
negative numbers are prefixed with ‘-’ (minus);
values are rounded and not truncated.
{INTEGER-n} | Integer number of up to n digits in total | Numerical field for both positive and negative integer values.
{ISIN} | 12 alphanumerical characters | ISIN code as defined in ISO 6166
{LEI} | 20 alphanumerical characters | Legal entity identifier as defined in ISO 17442
{MIC} | 4 alphanumerical characters | Market identifier as defined in ISO 10383
{NATIONAL_ID} | 35 alphanumerical characters | The identifier is that set out in Article 6 and Annex II to Commission Delegated Regulation (EU) 2017/590.
N. | Field | Content of the order details to be maintained at the disposal of the competent authority | Standards and formats of the order details to be used when providing the relevant order data to competent authority upon request
Section A — Identification of the relevant parties
1 | Identification of the entity which submitted the order | The identity of the member or participant of the trading venue. In case of Direct Electronic Access (DEA) the identity shall be the one of the DEA provider. | {LEI}
2 | Direct Electronic Access (DEA) |
‘true’ where the order was submitted to the trading venue using DEA as defined in Article 4(1)(41) of Directive 2014/65/EU.
‘false’ where the order was not submitted to the trading venue using DEA as defined in Article 4(1)(41) of Directive 2014/65/EU.
‘true’
‘false’
3 | Client identification code |
Code used to identify the client of the member or participant of the trading venue. In case there is DEA, the code of the DEA user shall be used.
Where the client is a legal entity, the LEI code of the client shall be used.
Where the client is not a legal entity, the {NATIONAL_ID} shall be used.
In case of aggregated orders, the flag AGGR as specified in Article 2(3) of this Regulation.
In case of pending allocations, the flag PNAL as specified in Article 2(2) of this Regulation.
This field shall be left blank only if the member or participant of the trading venue has no client.
{LEI}
{NATIONAL_ID}
‘AGGR’ — aggregated orders
‘PNAL’ — pending allocations
4 | Investment decision within firm |
Code used to identify the person or the algorithm within the member or participant of the trading venue who is responsible for the investment decision in accordance with Article 8 of Delegated Regulation (EU) 2017/590.
Where a natural persons within the member or participant of the trading venue is responsible for the investment decision the person who is responsible or has primary responsibility for the investment decision shall be identified with the {NATIONAL_ID}
Where an algorithm was responsible for the investment decision the field shall be populated as set out in Article 8 of Delegated Regulation (EU) 2017/590.
This field shall be left blank when the investment decision was not made by a person or algorithm within the member or participant of the trading venue.
{NATIONAL_ID} — Natural persons
{ALPHANUM-50} — Algorithms
5 | Execution within firm |
Code used to identify the person or algorithm within the member or participant of the trading venue who is responsible for the execution of the transaction resulting from the order in accordance with Article 9 of Delegated Regulation (EU) 2017/590. Where a natural person is responsible for the execution of the transaction, the person shall be identified by {NATIONAL_ID}
Where an algorithm is responsible for the execution of the transaction, this field shall be populated in accordance with Article 9 of Delegated Regulation (EU) 2017/590.
Where more than one person or a combination of persons and algorithms are involved in the execution of the transaction, the member or participant or client of the trading venue shall determine the trader or algorithm primarily responsible as specified in Article 9(4) of Delegated Regulation (EU) 2017/590 and populate this field with the identity of that trader or algorithm.
{NATIONAL_ID} — Natural persons
{ALPHANUM-50} — Algorithms
6 | Non-executing broker |
In accordance with Article 2(d).
This field shall be left blank when not relevant.
{LEI}
Section B — Trading capacity and liquidity provision
7 | Trading capacity |
Indicates whether the order submission results from the member or, participant of the trading venue is carrying out matched principal trading under Article 4(38) of Directive 2014/65/EU, or dealing on its own account under Article 4(6) of Directive 2014/65/EU.
Where the order submission does not result from the member or participant of the trading venue carrying out matched principal trading or dealing on its own account, the field shall indicate that the transaction was carried out under any other capacity.
‘DEAL’ — Dealing on own account
‘MTCH’ — Matched principal
‘AOTC’ — Any other capacity
8 | Liquidity provision activity | Indicates whether an order is submitted to a trading venue as part of a market-making strategy pursuant to Articles 17 and 48 of Directive 2014/65/EU, or is submitted as part of another activity in accordance with Article 3 of this Regulation. |
‘true’
‘false’
Section C — Date and time
9 | Date and Time | The date and time for each event listed in Section [G] and [K]. |
{DATE_TIME_FORMAT}
The number of digits after the ‘seconds’ shall be determined in accordance with Article 2 of the Commission Delegated Regulation (EU) 2017/574.
Section D — Validity period and order restrictions
10 | Validity period | Good-For-Day: the order expires at the end of the trading day on which it was entered in the order book. | ‘DAVY’ — Good-For-Day
Good-Till-Cancelled: the order will remain active in the order book and be executable until it is actually cancelled. | ‘GTCV’ — Good-Till-Cancelled
Good-Till-Time: the order expires at the latest at a pre-determined time within the current trading session. | ‘GTTV’ — Good-Till-Time
Good-Till-Date: the order expires at the end of a specified date. | ‘GTDV’ — Good-Till-Date
Good-Till-Specified Date and Time: the order expires at a specified date and time. | ‘GTSV’ — Good-Till-Specified Date and Time
Good After Time: the order is only active after a pre-determined time within the current trading session. | ‘GATV’ — Good After Time
Good After Date: the order is only active from the beginning of a pre-determined date. | ‘GADV’ — Good After Date
Good After Specified Date and Time: the order is only active from a pre-determined time on a pre-determined date. | ‘GASV’ — Good After Specified Date and Time
Immediate-Or-Cancel: an order which is executed upon its entering into the order book (for the quantity that can be executed) and which does not remain in the order book for the remaining quantity (if any) that has not been executed. | ‘IOCV’ — Immediate-Or-Cancel
Fill-Or-Kill: an order which is executed upon its entering into the order book provided that it can be fully filled: in the event the order can only be partially executed, then it is automatically rejected and cannot therefore be executed. |
‘FOKV’ — Fill-Or-Kill
or
{ALPHANUM-4} characters not already in use for the trading venue's own classification.
Other: any additional indications that are unique for specific business models, trading platforms or systems. |
11 | Order restriction | Good For Closing Price Crossing Session: where an order qualifies for the closing price crossing session. | ‘SESR’ — Good For Closing Price Crossing Session
Valid For Auction: the order is only active and can only be executed at auction phases (which can be pre-defined by the member or, participant of the trading venue who submitted the order, e.g. opening and/closing auctions and/or intraday auction). | ‘VFAR’ — Valid For Auction
Valid For Continuous Trading only: the order is only active during continuous trading. | ‘VFCR’ — Valid For Continuous Trading only
Other: any additional indications that are unique for specific business models, trading platforms or systems. |
{ALPHANUM-4} characters not already in use for the trading venue's own classification.
This field shall be populated with multiple flags separated by a comma where there are multiple types applicable.
12 | Validity period and time |
This refers to the time stamp reflecting the time on which the order becomes active or it is ultimately removed from the order book
Good for day: the date of entry with the timestamp immediately prior to midnight
Good till tim: the date of entry and the time to that specified in the order
Good till date: will be the specified date of expiry with the timestamp immediately prior to midnight
Good till specified date and time: the specified date and time of expiry
Good after time: the date of entry and the specified time at which the order becomes active
Good after date: the specified date with the timestamp immediately after midnight
Good after specified date and time: the specified date and time at which the order becomes active
Good till Cancel: the ultimate date and time the order is automatically removed by market operations
Other: timestamp for any additional validity type.
{DATE_TIME_FORMAT}
The number of digits after the ‘seconds’ is determined in accordance with Article 2 of Delegated Regulation (EU) 2017/574.
Section E — Priority and sequence number
13 | Priority time stamp | This field shall be updated every time the priority of an order changes. |
{DATE_TIME_FORMAT}
The number of digits after the ‘seconds’ is determined in accordance with Article 2 of Delegated Regulation (EU) 2017/574.
14 | Priority size |
For trading venues which use size-time priority, this field shall be populated with a positive number corresponding to the quantity.
This field shall be updated every time the priority of the order changes.
Up to 20 numeric positive digits.
15 | Sequence number |
Each and every event listed in section G shall be identified using positive integers in ascending order.
The sequence number shall be unique to each type of event; consistent across all events, timestamped by the operator of the trading venue; be persistent for the date that the event occurs.
{INTEGER-50}
Section F — Identification of the order
16 | Segment MIC code |
Identification of the trading venue where the order was submitted.
If the trading venue uses segment MICs then the segment MIC shall be used.
If the trading venue does not use segment MICs then the operating MIC shall be used
{MIC}
17 | Order book code | The alphanumerical code established by the trading venue for each and every order book. | {ALPHANUM-20}
18 | Financial instrument identification code | Unique and unambiguous identifier of the financial instrument | {ISIN}
19 | Date of receipt | Date of receipt of the original order. | {DATEFORMAT}
20 | Order identification code | An alphanumerical code assigned by the operator of the trading venue to the individual order. | {ALPHANUM-50}
Section G — Events affecting the order
21 | New order, order modification, order cancellation, order rejections, partial or full execution | New order: receipt of a new order by the operator of the trading venue. | ‘NEWO’ — New order
Triggered: an order which becomes executable or, as the case may be, non-executable upon the realisation of a pre-determined condition. | ‘TRIG’ — Triggered
Replaced by the member or participant of the trading venue: where a member, participant or client of the trading venue decides upon its own initiative to change any characteristic of the order it has previously entered into the order book. | ‘REME’ — Replaced by the member or participant of the trading venue
Replaced by market operations (automatic): where any characteristic of an order is changed by the trading venue operator's IT systems. This includes where a peg order's or a trailing stop order's current characteristics are changed to reflect how the order is located within the order book. | ‘REMA’ — Replaced by market operations (automatic)
Replaced by market operations (human intervention): where any characteristic of an order is changed by a trading venue operator's staff. This includes the situation where a member, participant of the trading venue has IT issues and needs its orders to be cancelled urgently. | ‘REMH’ — Replaced by market operations (human intervention)
Change of status at the initiative of the member, participant of the trading venue. This includes activation and deactivation. | ‘CHME’ — Change of status at the initiative of the member/participant of the trading venue
Change of status due to market operations. | ‘CHMO’ — Change of status due to market operations
Cancelled at the initiative of the member, participant of the trading venue; where a member, participant or client decides upon its own initiative to cancel the order it has previously entered. | ‘CAME’ — Cancelled at the initiative of the member or participant of the trading venue
Cancelled by market operations. This includes a protection mechanism provided for investment firms carrying out a market-making activity as laid down in Articles 17 and 48 of Directive 2014/65/EU | ‘CAMO’ -Cancelled by market operations
Rejected order: an order received but rejected by the operator of the trading venue. | ‘REMO’ — Rejected order
Expired order: where the order is removed from the order book upon the end of its validity period. | ‘EXPI’ — Expired order
Partially filled: where the order is not fully executed so that there remains a quantity to be executed. | ‘PARF’ — Partially filled
Filled: where there is no more quantity to be executed. |
‘FILL’ — Filled
{ALPHANUM-4} characters not already in use for the trading venue's own classification.
Section H — Type of order
22 | Order type | Identifies the type of order submitted to the trading venue as per the trading venue specifications. | {ALPHANUM-50}
23 | Order type classification |
Classification of the order according to two generic order types. LIMIT order: in the cases where the order is tradable
and
STOP order: in the cases where the order becomes tradable only upon the realisation of a pre-determined price event.
The letters ‘LMTO’ for limit or the letters ‘STOP’ for stop.
Section I — Prices
24 | Limit price |
The maximum price at which a buy order can trade or the minimum price at which a sell order can trade.
The spread price for a strategy order. It can be negative or positive.
This field shall be left blank in case of orders that do not have a limit price or in case of unpriced orders.
In case of a convertible bond, the real price (clean or dirty) used for the order shall be reflected in this field.
{DECIMAL-18/13} in case the price is expressed as monetary value.
Where price is reported in monetary terms, it shall be provided in the major currency unit.
{DECIMAL-11/10} in case the price is expressed as a percentage or yield.
{DECIMAL-18/17} in case the price is expressed as basis points
25 | Additional limit Price | Any other limit price which may apply to the order. This field shall be left blank if not relevant. |
{DECIMAL-18/13} where the price is expressed as a monetary value.
Where the price is reported in monetary terms, it shall be provided in the major currency unit.
{DECIMAL-11/10 where the price is expressed as a percentage or yield.
{DECIMAL-18/17} in case the price is expressed as basis points
26 | Stop price |
The price that must be reached for the order to become active.
For stop orders triggered by events independent of the price of the financial instrument, this field shall be populated with a stop price equal to zero.
This field shall be left blank if not relevant.
{DECIMAL-18/13 where the price is expressed as a monetary value.
Where the price is reported in monetary terms, it shall be provided in the major currency unit.
{DECIMAL-11/10} in case the price is expressed as a percentage or yield.
{DECIMAL-18/17} in case the price is expressed as basis points.
27 | Pegged limit price |
The maximum price at which a pegged order to buy can trade or the minimum price at which a pegged order to sell can trade.
This field shall be left blank if not relevant.
{DECIMAL-18/13} where the price is expressed as a monetary value.
Where the price is reported in monetary terms, it shall be provided in the major currency unit.
{DECIMAL-11/10} in case the price is expressed as a percentage or yield.
{DECIMAL-18/17} in case the price is expressed as basis points
28 | Transaction price |
Traded price of the transaction excluding, where applicable, commission and accrued interest.
In the case of option contracts, it shall be the premium of the derivative contract per underlying or index point.
In the case of spread bets it shall be the reference price of the direct underlying instrument.
For credit default swaps (CDS) it shall be the coupon in basis points.
Where price reported in monetary terms, it shall be provided in the major currency unit.
Where price is not applicable the field shall be populated with the value ‘NOAP’.
{DECIMAL-18/13 in case the price is expressed as monetary.
{DECIMAL-11/10} in case the price is expressed as percentage or yield
{DECIMAL-18/17} in case the price is expressed as basis points
‘NOAP’
29 | Price currency | Currency in which the trading price for the financial instrument related to the order is expressed (applicable where the price is expressed as monetary value). | {CURRENCYCODE_3}
30 | Currency of leg 2 |
Where there are multi-currency or cross-currency swaps, the currency of leg 2 shall be the currency in which leg 2 of the contract is denominated.
For swaptions where the underlying swap is multi-currency, the currency of leg 2 shall be the currency in which leg 2 of the swap is denominated.
This field only needs to be filled in where there are interest rates and currency derivatives contracts.
{CURRENCYCODE_3}
31 | Price notation | Indicates whether the price is expressed in monetary value, in percentage, in yield or in basis points. |
‘MONE’ — Monetary value
‘PERC’ — Percentage
‘YIEL’ — Yield
‘BAPO’ — Basis points
Section J — Order instructions
32 | Buy-sell indicator |
To show if the order is to buy or sell.
In case of options and swaptions, the buyer shall be the counterparty that holds the right to exercise the option and the seller shall be the counterparty that sells the option and receives a premium.
In case of futures and forwards other than futures and forwards relating to currencies, the buyer shall be the counterparty buying the instrument and the seller the counterparty selling the instrument.
In the case of swaps relating to securities, the buyer shall be the counterparty that gets the risk of price movement of the underlying security and receives the security amount. The seller shall be the counterparty paying the security amount.
In the case of swaps related to interest rates or inflation indices, the buyer shall be the counterparty paying the fixed rate. The seller shall be the counterparty receiving the fixed rate. In case of basis swaps (float-to-float interest rate swaps), the buyer shall be the counterparty that pays the spread and the seller the counterparty that receives the spread.
In the case of swaps and forwards related to currencies and of cross currency swaps, the buyer shall be the counterparty receiving the currency which is first when sorted alphabetically by ISO 4217 standard and the seller shall be the counterparty delivering this currency.
In the case of swaps related to dividends, the buyer shall be the counterparty receiving the equivalent actual dividend payments. The seller is the counterparty paying the dividend and receiving the fixed rate.
In the case of derivative instruments for the transfer of credit risk except options and swaptions, the buyer shall be the counterparty buying the protection. The seller is the counterparty selling the protection.
In case of derivative contracts related to commodities or emission allowances, the buyer shall be the counterparty that receives the commodity or emission allowance specified in the report and the seller the counterparty delivering this commodity or emission allowance.
In case of forward rate agreements, the buyer shall be the counterparty paying the fixed rate and the seller the counterparty receiving the fixed rate.
For an increase in notional the buyer shall be the same as the acquirer of the financial instrument in the original transaction and the seller shall be the same as the disposer of the financial instrument in the original transaction.
For a decrease in notional the buyer shall be the same as the disposer of the financial instrument in the original transaction and the seller shall be the same as the acquirer of the financial instrument in the original transaction.
‘BUYI’ — buy
‘SELL’ — sell
33 | Order status |
To identify orders that are active/inactive/suspended, firm/indicative (assigned to quotes only)/implicit/rerouted.
Active — non-quote orders that are tradable.
Inactive — non-quote orders that are not tradable.
Firm/Indicative — Assigned to quotes only. Indicative quotes mean that they are visible but cannot be executed. This includes warrants in some trading venue. Firm quotes can be executed.
Implicit — Used for strategy orders that are derived from implied in or implied out functionality.
Routed — Used for orders that are routed by the trading venue to other venues.
‘ACTI’- active
or
‘INAC’- inactive
or
‘FIRM’- firm quotes
or
‘INDI’- indicative quotes
or
‘IMPL’- implied strategy orders
or
‘ROUT’- routed orders.