[Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports]
Identification number of the additive | Name of the holder of authorisation | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
| (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9)
Category: Sensory additives. Functional group: Flavouring compounds
2b02022 | — | Octan-2-ol |
Octan-2-ol
Octan-2-ol
Produced by chemical synthesis
Purity: min 97 %
C8H18O
CAS No 123¬96-6
FLAVIS No:02.022
For the determination of octan-2-ol in the feed additive and in feed flavouring premixtures:
Gas-chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
1 mg/kg for pigs and poultry;
1,5 mg/kg for other species and categories.’
The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:
1 mg/kg for pigs and poultry;
1,5 mg/kg for other species and categories.
For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
6 February 2027
2b02079 | — | Isopropanol |
Isopropanol
Isopropanol
Produced by chemical synthesis
Purity: min. 99,7 %
Chemical formula: C3H8O
CAS No 67-63-0
FLAVIS No: 02.079
For the determination of isopropanol in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
25 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg’
The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg.
For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
6 February 2027
2b02088 | — | Pentan-2-ol |
Pentan-2-ol
Pentan-2-ol
Produced by chemical synthesis
Purity: min. 97,9 %
Chemical formula: C5H12O
CAS No 6032-29-7
FLAVIS No: 02.088
For the determination of pentan-2-ol in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
1 mg/kg for pigs and poultry;
1,5 mg/kg for other species and categories.’
The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:
1 mg/kg for pigs and poultry;
1,5 mg/kg for other species and categories.
For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
6 February 2027
2b02098 | — | Octan-3-ol |
Octan-3-ol
Octan-3-ol
Produced by chemical synthesis
Purity: min. 97 %
Chemical formula: C8H18O
CAS No 589-98-0
FLAVIS No:02.098
For the determination of octan-3-ol in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
1 mg/kg for pigs and poultry;
1,5 mg/kg for other species and categories.’
The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:
1 mg/kg for pigs and poultry;
1,5 mg/kg for other species and categories.
For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
6 February 2027
2b07002 | — | Heptan-2-one |
Heptan-2-one
Heptan-2-one
Produced by chemical synthesis
Purity: min. 95 %
Chemical formula: C7H14O
CAS No 110-43-0
FLAVIS No: 07.002
For the determination heptan-2-one in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
for piglets: 4 mg/kg, for chickens for fattening and laying hens: 3 mg/kg, for cats: 2 mg/kg and for other species and categories: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
4 mg/kg for piglets;
3 mg/kg for chickens for fattening and laying hens;
2 mg/kg for cats;
5 mg/kg for other species and categories’
The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:
4 mg/kg for piglets;
3 mg/kg for chickens for fattening and laying hens;
2 mg/kg for cats;
5 mg/kg for other species and categories
For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
6 February 2027
2b07054 | — | Pentan-2-one |
Pentan-2-one
Pentan-2-one
Produced by chemical synthesis
Purity: min. 95 %
Chemical formula: C5H10O
CAS No 107-87-9
FLAVIS No: 07.054
For the determination of pentan-2-one in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
for piglets: 4 mg/kg, for chickens for fattening and laying hens: 3 mg/kg, for cats: 2 mg/kg and for other species and categories: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
4 mg/kg for piglets;
3 mg/kg for chickens for fattening and laying hens;
2 mg/kg for cats;
5 mg/kg for other species and categories’
The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:
4 mg/kg for piglets;
3 mg/kg for chickens for fattening and laying hens;
2 mg/kg for cats;
5 mg/kg for other species and categories
For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
6 February 2027
2b07099 | — | 6-Methyl- hepta- 3,5-dien- 2-one |
6-Methyl- hepta- 3,5-dien- 2-one
6-Methyl- hepta- 3,5-dien- 2-one
Produced by chemical synthesis
Purity: min. 96 %
Chemical formula: C8H12O
CAS No 1604-28-0
FLAVIS No: 07.099
For the determination of 6-methyl- hepta- 3,5-dien- 2-one in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
for pigs and poultry: 0,3 mg/kg, and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
0,3 mg/kg for pigs and poultry;
0,5 mg/kg for other species and categories’
The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:
0,3 mg/kg for pigs and poultry;
0,5 mg/kg for other species and categories
For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
6 February 2027
2b07113 | — | Nonan- 3- one |
Nonan- 3- one
Nonan- 3- one
Produced by chemical synthesis
Purity: min. 95,9 %
Chemical formula: C9H18O
CAS No 925-78-0
FLAVIS No: 07.113
For the determination of nonan- 3- one in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
pigs and poultry: 0,3 mg/kg, for fish: 0,05 mg/kg and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
0,3 mg/kg for pigs and poultry;
0,05 mg/kg for fish;
0,5 mg/kg for other species and categories’
The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:
0,3 mg/kg for pigs and poultry;
0,05 mg/kg for fish;
0,5 mg/kg for other species and categories
For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
6 February 2027
2b07150 | — | Decan- 2 -one |
Decan- 2 -one
Decan- 2 -one
Produced by chemical synthesis
Purity: min. 98 %
Chemical formula: C10H20O
CAS No 693-54-9
FLAVIS No: 07.150
For the determination of decan- 2 -one in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
for pigs and poultry: 0,3 mg/kg, and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
0,3 mg/kg for pigs and poultry;
0,5 mg/kg for other species and categories’
The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:
0,3 mg/kg for pigs and poultry;
0,5 mg/kg for other species and categories
For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
6 February 2027
2b09105 | — | Isopropyl tetradecanoate |
Isopropyl tetradecanoate
Isopropyl tetradecanoate
Produced by chemical synthesis
Purity: min. 99 %
Chemical formula: C17H34O2
CAS No 110-27-0
FLAVIS No 09.105
For the determination of isopropyl tetradecanoate in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg’
The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg
For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
6 February 2027