[Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports]
Identification number of the additive | Name of the holder of authorisation | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
| (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9)
Category: Sensory additives. Functional group: Flavouring compounds
2b02001 | — | 2-Methylpropan-1-ol |
2-Methylpropan-1-ol
2-Methylpropan-1-ol
Produced by chemical synthesis
Purity: min. 98 %
Chemical formula: C4H10O
CAS number 78-83-1
FLAVIS 02.001
For the determination of 2-Methylpropan-1-ol in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
6 February 2027
2b02003 | — | Isopentanol |
Isopentanol
Isopentanol
Produced by chemical synthesis
Purity: min. 98 %
Chemical formula: C5H12O
CAS number 123-51-3
FLAVIS 02.003
For the determination of Isopentanol in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment
6 February 2027
2b02026 | — | 3,7-Dimethyloctan-1-ol |
3,7-Dimethyloctan-1-ol
3,7-Dimethyloctan-1-ol
Produced by chemical synthesis
Purity: min. 90 %
Chemical formula: C10H22O
CAS number 106-21-8
FLAVIS 02.026
For the identification of 3,7-Dimethyloctan-1-ol in the feed additive and flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment
6 February 2027
2b02082 | — | 2-Ethylhexan-1-ol |
2-Ethylhexan-1-ol
2-Ethylhexan-1-ol
Produced by chemical synthesis
Purity: min. 97 %
Chemical formula: C8H18O
CAS number 104-76-7
FLAVIS 02.082
For the determination of 2-Ethylhexan-1-ol in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment
6 February 2027
2b05004 | — | 2-Methylpropanal |
2-Methylpropanal
2-Methylpropanal
Produced by chemical synthesis
Purity: min. 98 %
Chemical formula: C4H8O
CAS number 78-84-2
FLAVIS 05.004
For the determination of 2-Methylpropanal in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
6 February 2027
2b05006 | — | 3-Methylbutanal |
3-Methylbutanal
3-Methylbutanal
Produced by chemical synthesis
Purity: min. 95 %
Chemical formula: C5H10O
CAS number 590-86-3
FLAVIS 05.006
For the determination of 3-Methylbutanal in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment
6 February 2027
2b05049 | — | 2-Methylbutyraldehyde |
2-Methylbutyraldehyde
2-Methylbutyraldehyde
Produced by chemical synthesis
Purity: min. 97 %
Chemical formula: C5H10O
CAS number 96-17-3
FLAVIS 05.049
For the determination of 2-Methylbutyraldehyde in the feed additive and in feed flavouring premixtures.
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
6 February 2027
2b08008 | — | 3-Methylbutyric acid |
3-Methylbutyric acid
3-Methylbutyric acid
Produced by chemical synthesis
Purity: min. 99 %
Chemical formula: C5H10O2
CAS number 503-74-2
FLAVIS 08.008
For the determination of 3-Methylbutyric acid in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment
6 February 2027
2b08031 | — | 2-Methylvaleric acid |
2-Methylvaleric acid
2-Methylvaleric acid
Produced by chemical synthesis
Purity: min. 98 %
Chemical formula: C6H12O2
CAS number 97-61-0
FLAVIS 08.031
For the determination of 2-Methylvaleric acid in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
6 February 2027
2b08045 | — | 2-Ethylbutyric acid |
2-Ethylbutyric acid
2-Ethylbutyric acid
Produced by chemical synthesis
Purity: min. 98 %
Chemical formula: C6H12O2
CAS number 88-09-5
FLAVIS 08.045
For the determination of 2-Ethylbutyric acid in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment
6 February 2027
2b08046 | — | 2-Methylbutyric acid |
2-Methylbutyric acid
2-Methylbutyric acid
Produced by chemical synthesis
Purity: min. 98 %
Chemical formula: C5H10O2
CAS number 116-53-0
FLAVIS 08.046
For the determination of 2-Methylbutyric acid in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment
6 February 2027
2b08047 | — | 2-Methylheptanoic acid |
2-Methylheptanoic acid
2-Methylheptanoic acid
Produced by chemical synthesis
Purity: min. 97 %
Chemical formula: C8H16O2
CAS number 1188-02-9
FLAVIS 08.047
For the determination of 2-Methylheptanoic acid in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment
6 February 2027
2b08062 | — | 4-Methylnonanoic acid |
4-Methylnonanoic acid
4-Methylnonanoic acid
Produced by chemical synthesis
Purity: min. 98 %
Chemical formula: C10H20O2
CAS number 45019-28-1
FLAVIS 08.062
For the identification of 4-Methylnonanoic acid in the feed additive and flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be:
for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.
For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment
6 February 2027
2b08063 | — | 4-Methyloctanoic acid |
4-Methyloctanoic acid
4-Methyloctanoic acid
Produced by chemical synthesis
Purity: min. 97 %
Chemical formula: C9H18O2
CAS number 54947-74-9
FLAVIS 08.063
For the determination of 4-Methyloctanoic acid in the feed additive and in feed flavouring premixtures:
Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
All animal species | — | — | — |
The additive shall be incorporated into the feed in the form of a premixture.
In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.
Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.