1 ANNEX, Regulation (EU) 2017/53

In forcesince 23 Feb 2025

[Details of the analytical methods are available at the following address of the European Union Reference Laboratory for Feed Additives: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports]

Identification number of the additive | Name of the holder of authorisation | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation

mg of active substance/kg of complete feedingstuff with a moisture content of 12 %

(1)

| (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9)

Category: Sensory additives. Functional group: Flavouring compounds

2b02004 | — | Butan-1-ol |

Butan-1-ol

Butan-1-ol

Produced by chemical synthesis

Purity: min. 99,5 %

Chemical formula: C4H10O

CAS number 71-36-3

FLAVIS 02.004

For the determination of Butan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b02005 | — | Hexan-1-ol |

Hexan-1-ol

Hexan-1-ol

Produced by chemical synthesis

Purity: min. 96,5 %

Chemical formula: C6H14O

CAS number 111-27-3

FLAVIS 02.005

For the determination of Hexan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b02006 | — | Octan-1-ol |

Octan-1-ol

Octan-1-ol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C8H18O

CAS number 111-87-5

FLAVIS 02.006

For the determination of Octan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment

6 February 2027

2b02007 | — | Nonan-1-ol |

Nonan-1-ol

Nonan-1-ol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C9H20O

CAS number 143-08-8

FLAVIS 02.007

For the determination of Nonan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment

6 February 2027

2b02008 | — | Dodecan-1-ol |

Dodecan-1-ol

Dodecan-1-ol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C12H26O

CAS number 112-53-8

FLAVIS 02.008

For the determination of Dodecan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b02021 | — | Heptan-1-ol |

Heptan-1-ol

Heptan-1-ol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C7H16O

CAS number 111-70-6

FLAVIS 02.021

For the determination of Heptan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b02024 | — | Decan-1-ol |

Decan-1-ol

Decan-1-ol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C10H22O

CAS number 112-30-1

FLAVIS 02.024

For the determination of Decan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b02040 | — | Pentan-1-ol |

Pentan-1-ol

Pentan-1-ol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C5H12O

CAS number 71-41-0

FLAVIS 02.040

For the determination of Pentan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b02078 | — | Ethanol |

Ethanol

Ethanol

Produced by chemical synthesis or enzymatic fermentation.

Purity: min. 95 %

Chemical formula: C2H6O

CAS number 64-17-5

FLAVIS 02.078

For the determination of Ethanol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b05001 | — | Acetaldehyde |

Acetaldehyde

Acetaldehyde

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C2H4O

CAS number 75-07-0

FLAVIS 05.001

For the determination of Acetaldehyde in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b05002 | — | Propanal |

Propanal

Propanal

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C3H6O

CAS number 123-38-6

FLAVIS 05.002

For the determination of Propanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b05003 | — | Butanal |

Butanal

Butanal

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C6H8O

CAS number 123-72-8

FLAVIS 05.003

For the determination of Butanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b05005 | — | Pentanal |

Pentanal

Pentanal

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C5H10O

CAS number 110-62-3

FLAVIS 05.005

For the determination of Pentanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b05008 | — | Hexanal |

Hexanal

Hexanal

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C6H12O

CAS number 66-25-1

FLAVIS 05.008

For the determination of Hexanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species | — | — | — |

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.

Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

This article is long: the rest is at the official publication.

  1. 23 Feb 2025 – todayin force
  2. 14 Dec 2016 – 23 Feb 2025earlier wording