1 ANNEX, Commission Delegated Regulation (EU) No 1292/2014 of 17 July 2014 on the conditions for…

In forcesince 17 Jul 2014

[Mounted in accordance with EN ISO 9239-1, on a substrate of at least Class D-s2, d0 with minimum density of 400 kg/m3 or with an air gap (minimum height 30 mm) underneath.] [An interlayer of at least Class Efl and with maximum thickness 3 mm and minimum density of 280 kg/m3 may be included.] [Class as set out in Table 2 of the Annex to Decision 2000/147/EC.] [Without surface coatings.] [Conditioned in accordance with EN 13238 (50 % RH, 23 °C).] [Substrate at least Class D-s2, d0.] [Applies also to steps of stairs.]

Product | Product detail |

Minimum mean density

(kg/m3)

Minimum overall thickness

(mm)

End use condition | Class for floorings

Wood flooring | Solid wood flooring of pine or spruce |

Pine: 480

Spruce: 400

14 | Without air gap underneath | Dfl-s1

Wood flooring | Solid flooring of beech, oak, pine or spruce |

Beech: 700

Oak: 700

Pine: 430

Spruce: 400

20 | With or without air gap underneath | Dfl-s1

Wood parquet | Solid wood (one layer) parquet of walnut | 650 | 8 | Glued to substrate | Dfl-s1

Wood parquet | Solid (one layer) parquet of oak, maple or ash |

Ash: 650

Maple: 650

Oak: 720

8 | Glued to substrate | Dfl-s1

Wood parquet | Multilayer parquet with oak top layer, at least 3,5 mm | 550 | 15 | Without air gap underneath | Dfl-s1

Wood flooring and parquet | Solid wood flooring and parquet not specified above | 400 | 6 | All | Efl

  • celex=32000D0147
  • num:eu=2000/147