Annex Number | Annex Title
I | Templates for the information document and information folder
II | Templates for the manufacturer’s statements on endurance testing and vehicle structure integrity
III | Templates for the manufacturer’s certificates providing proof of compliance to the type-approval authority on access to vehicle on-board diagnostics (OBD) and to vehicle repair and maintenance information
IV | Templates for the certificates of conformity
V | Models for the statutory plate and EU type-approval mark
VI | Templates for the EU type-approval certificate
VII | Numbering system of the EU type-approval certificate
VIII | Format of test reports and template for the test results sheet
IX | Template and numbering system for the certificate for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems
X | List of parts or equipment which may pose a serious risk to the correct functioning of essential systems
Appendix Number | Appendix title
1 | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a tailpipe pollution-control system
2 | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a crankcase and evaporative emissions system
3 | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an on-board diagnostic (OBD) system
4 | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a sound level system
5 | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a propulsion unit performance system
5a | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a maximum torque and a maximum net power of a propulsion unit system
6 | Model information document relating to EU type-approval of a pollution-control device as a STU
7 | Model information document relating to EU type-approval of a noise-abatement device as a STU
8 | Model information document relating to EU type-approval of an exhaust (pollution-control device and noise-abatement device) as a STU
8a | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning devices system
9 | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a braking system
9a | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of glazing, windscreen wipers and defrosting and demisting devices system
9b | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an identification of controls, tell-tales and indicators system
10 | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of lighting and light-signalling devices system
11 | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a roll-over protective structure (ROPS) system
11a | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a safety belt anchorages system
11b | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a steer-ability, cornering properties and turn ability system
12 | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of tyres system
13 | Model information document relating to EU type-approval of an audible warning device as a component
13a | Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a vehicle occupant protection, including interior fittings, head restraint and vehicle doors system
14 | Model information document relating to EU type-approval of a non-glazing front windscreen as a component/STU
15 | Model information document relating to EU type-approval of a windscreen washer device as a component/STU
16 | Model information document relating to EU type-approval of a rearward visibility device as a component/STU
17 | Model information document relating to EU type-approval of safety belts as a STU
18 | Model information document relating to EU type-approval of a seating position (saddle/seat) as a component/STU)
19 | Model information document relating to EU type-approval of a trailer coupling device as a STU
20 | Model information document relating to EU type-approval of devices to prevent unauthorised use as a STU
20a | Model information document relating to EU type-approval of a fuel tank as a STU
21 | Model information document relating to EU type-approval of passenger handholds as a STU
22 | Model information document relating to EU type-approval of footrests as a STU
23 | Model information document relating to EU type-approval of a side-car as a STU
24 | Manufacturer's declaration for vehicles capable of converting their performance level from subcategory (L3e/L4e)-A2 to (L3e/L4e)-A3 and vice versa
25 | Manufacturer’s declaration on powertrain tampering prevention measures (anti-tampering)
1.1. When applying for EU type-approval for a vehicle, system, component or separate technical unit, the manufacturer shall provide, in accordance with Article 27 of Regulation (EU) No 168/2013, an information folder which shall contain the following:
1.1.1. a list of contents;
1.1.2. the information on the type-approval procedure chosen in accordance with Article 25(1) of Regulation (EU) No 168/2013, the template for which is set out in point 2 (information folder sheet);
1.1.3. the information document as set out in Part B of this Annex;
1.1.4. all relevant data, drawings, photographs and other information as required in the information document;
1.1.5. the manufacturer’s statement on endurance of functional safety-critical systems, parts and equipment as referred to in Article 22(2) of Regulation (EU) No 168/2013 and set out in Annex II to this regulation;
1.1.6. the manufacturer’s statement on vehicle structure integrity as referred to in Article 22(5) of Regulation (EU) No 168/2013 and in point 1.1.of Annex XIX to Commission Delegated Regulation (EU) No 3/2014 of 24 October 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to vehicle functional safety requirements for the approval of two- or three-wheel vehicles and quadricycles [OJ L 7, 10.1.2014, p. 1.], as set out point 1.4. of Annex II to this regulation;
1.1.7. the manufacturer’s certificate providing proof of compliance to the type-approval authority on access to vehicle on-board diagnostic (OBD) systems and to vehicle repair and maintenance information as referred to in Article 57(8) of Regulation (EU) No 168/2013 and set out in Annex III to this regulation;
1.1.8. the manufacturer’s declaration of conversion of (L3e/L4e)-A2 to (L3e/L4e)-A3 motorcycle characteristics and vice versa as referred to in Article 25(8) of Regulation (EU) No 168/2013 and in point 4.2.6. of Annex III to Commission Delegated Regulation (EU) No 44/2014 of 21 November 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to the vehicle construction and general requirements for the approval of two- or three- wheel vehicles and quadricycles [OJ L 25, 28.1.2014, p. 1.], as set out in Appendix 24 of this Annex;
1.1.9. the manufacturer’s declaration on powertrain tampering prevention measures (anti-tampering) as referred to in Article 20(2) of Regulation (EU) No 168/2013 and in points 2.2., 2.6. and 5.2. of Annex II to Commission Delegated Regulation 44/2014 according to the models established in Appendix 25 of this Annex;
1.1.10. any additional information requested by the approval authority as part of the approval procedure.
1.2. Applications submitted on paper shall be in triplicate. Any drawings shall be to an appropriate scale and in sufficient detail on size A4 sheets or in a folder of A4 format. Photographs, if any, shall show sufficient detail.
1.3. If the systems, components or separate technical units have electronic controls, information concerning their performance shall be provided.
A duly completed version of this statement shall be included in the information folder.
The undersigned: [… (full name and position)]
Company name and address of the manufacturer: …
Name and address of the manufacturer’s representative (if any): …
Hereby applies for type-approval procedure(4):
step-by-step type-approval
single-step type-approval
mixed type-approval
Where procedures (a) or (c) are chosen, compliance with requirements as under (b) is declared for all systems, components and separate technical units.
Multi-stage type-approval chosen in accordance with Article 25(5) of Regulation (EU) No 168/2013: yes/no(4)
Information on the vehicle(s) to be filled in, if application is for EU whole-vehicle type-approval(3):
0.1. Make (trade name of the manufacturer): …
0.2. Type(17): …
0.2.1. Variant(s)(17): …
0.2.2. Version(s)(17): …
0.2.3. Commercial name(s) (if available): …
0.3. Category, subcategory and sub-subcategory of vehicle(2): …
Information to be filled in, if application is for type-approval of a system/ component/separate technical unit(3)(4):
0.7. Make(s) (trade name(s) of manufacturer): …
0.8. Type: …
0.8.1. Commercial name(s) (if available): …
1.6. Virtual and/or self-testing(3)
1.6.1. Overview list with virtual and/or self-tested systems, components or separate technical units pursuant to point 6 of Annex III to Commission Delegated Regulation (EU) No 44/2014 below:
[Commission Delegated Regulation (EU) No 134/2014 of 16 December 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to environmental and propulsion unit performance requirements and amending Annex V thereof (OJ L 53, 21.2.2014, p. 1).]
Delegated act | Annex | Subject | Virtual and/or self-tested: yes/no(4)
Commission Delegated Regulation (EU) No 134/2014 | IX | Testing procedures on maximum design vehicle speed | Self-testing: yes/no(4)
Commission Delegated Regulation (EU) No 3/2014 | II | Audible warning devices | Self-testing: yes/no(4)
Commission Delegated Regulation (EU) No 3/2014 | VIII | Driver-operated controls including identification of controls, tell-tales and indicators | Self-testing: yes/no(4)
Commission Delegated Regulation (EU) No 3/2014 | IX | Installation of lighting and light- signalling devices | Virtual testing: yes/no(4)
Commission Delegated Regulation (EU) No 3/2014 | X | Rearward visibility | Virtual testing: yes/no(4)
Commission Delegated Regulation (EU) No 3/2014 | XIV | Installation of tyres | Virtual testing: yes/no(4)
Commission Delegated Regulation (EU) No 44/2014 | XIV | Registration plate space | Self & Virtual testing: yes/no(4)
Commission Delegated Regulation (EU) No 44/2014 | XVI | Stands | Self-testing: yes/no(4)
This Commission Implementing Regulation | VIII | Statutory plate and EU type-approval mark | Self-testing: yes/no(4)
1.6.2. Detailed report on validation of virtual and/or self-testing added: yes/no(4)
Place: … | Date: …
Signature: … | Name and position in the company: …
1.1.
The information document shall have a reference number supplied by the applicant.
1.2.
Where the particulars appearing in the information document for vehicle approval have changed, the manufacturer shall submit revised pages to the approval authority showing clearly the nature of the change(s) and the date of re-issue.
1.3.1. The manufacturer shall supply the information required by the following table in respect of the applicable subjects for the vehicle in Annex II to Regulation (EU) No 168/2013. All relevant approvals and test reports (if available) for each subject shall be included. However, information in respect of systems, components or separate technical units need not be given here so long as such information is included in the correspondent approval certificate.
[Contracting parties to the Revised 1958 Agreement.] [To be indicated if not obtainable from the type-approval number.] [The approval authority shall complete the references for the test reports, established by regulatory acts, for which no type-approval certificate is available.]
Item number and subject | Type-approval number or test report number | Date of issue of the type-approval or of its extension or of the test report | Member State or contracting party issuing the type- approval or technical service issuing the test report | Reference to the regulatory act and its latest amendment | Variant(s)/ version(s
e.g.
B1 audible warning devices
Signed: …
Position in company: …
Date: …
1.4.
Vehicles and Vehicle types shall be identified as compliant with environmental step Euro 5 or environmental step Euro 5+ in accordance with the following Table:
(sub-) category |
Obligatory as of:
1.1.2020 for new types of vehicles
1.1.2021 for existing types of vehicles
Envi. step |
Obligatory as of:
1.1.2024 for new types of vehicles
1.1.2025 for existing types of vehicles
Envi. step
L1e | OBD system not required | Euro 5 | OBD system not required | Euro 5
test types I, IV & V: Euro 5 | test types I, IV & V: Euro 5
L2e (other than L2e-U) | OBD system not required | Euro 5 | OBD system not required | Euro 5
test types I, IV & V: Euro 5 | test types I, IV & V: Euro 5
L2e-U | OBD system not required | Euro 5 | OBD system not required | Euro 5+
test type I: Euro 4 | test type I: Euro 5
test type IV & V: Euro 5 | test types IV & V: Euro 5
L3e (other than enduro and trial), L4e, L5e-A and L7e-A | OBD stage I system that monitors electric circuit and electronics failure, and triggers a report when: | Euro 5 | OBD stage I system that monitors electric circuit and electronics failure, and triggers a report when: | Euro 5+
OBD emission thresholds of Annex VI (B1) to Regulation (EU) No 168/2013 are exceeded, and
OBD emission thresholds of Annex VI (B2) to Regulation (EU) No 168/2013 are exceeded, and
any operating mode significantly reduces engine torque.
any operating mode significantly reduces engine torque.
OBD stage II that monitors emission control system failures and degradation (with the exception of catalyst monitoring), and reports when: | OBD stage II that monitors emission control system failures and degradation, and reports when:
OBD emission thresholds of Annex VI (B1) to Regulation (EU) No 168/2013 are exceeded. | OBD emission thresholds of Annex VI (B2) to Regulation (EU) No 168/2013 are exceeded.
test types I, IV & V: Euro 5 | test types I, IV & V: Euro 5
Enduro L3e-AxE and Trial L3e-AxT | OBD stage I system that monitors electric circuit and electronics failure, and triggers a report when: | Euro 5 | OBD stage I system that monitors electric circuit and electronics failure, and triggers a report when: | Euro 5+
OBD emission thresholds of Annex VI (B1) to Regulation (EU) No 168/2013 are exceeded, and
OBD emission thresholds of Annex VI (B2) to Regulation (EU) No 168/2013 are exceeded, and
any operating mode significantly reduces engine torque.
any operating mode significantly reduces engine torque.
test type I: Euro 4 | test type I: Euro 5
test types IV & V: Euro 5 | test types IV & V: Euro 5
L5e (other than Le5-A) and L7e (other than L7e-A) | OBD stage I system that monitors electric circuit and electronics failure, and triggers a report when: | Euro 5 | OBD stage I system that monitors electric circuit and electronics failure, and triggers a report when: | Euro 5+
OBD emission thresholds of Annex VI (B1) to Regulation (EU) No 168/2013 are exceeded, and
OBD emission thresholds of Annex VI (B2) to Regulation (EU) No 168/2013 are exceeded, and
any operating mode significantly reduces engine torque.
any operating mode significantly reduces engine torque.
test types I, IV & V: Euro 5 | test types I, IV & V: Euro 5
L6e other than L6e-B | OBD system not required | Euro 5 | OBD system not required | Euro 5
test types I, IV & V: Euro 5 | test types I, IV & V: Euro 5
L6e-B | OBD system not required | Euro 5 | OBD system not required | Euro 5+
test type I: Euro 4 | test type I: Euro 5
test type IV & V: Euro 5 | test type IV & V: Euro 5
All information documents shall contain the following:
2.1.
For a whole vehicle type-approval the manufacturer shall complete:
the matrix in point 2.3. to identify the versions and variants of the vehicle intended for type-approval;
a list of items applicable to the (sub-)category and to the technical characteristics of the vehicle from which content has been extracted, adhering to the numbering system of the total list set out in point 2.6.
2.2.
For a system, component or separate technical unit as listed in table 1 the manufacturer shall complete the applicable appendix to this Annex.
In addition to the Annexes mentioned in table 1, the systems, components and separate technical units shall comply with the following requirements:
arrangements for type-approval procedures (Annex III of Commission Delegated Regulation (EU) No 44/2014)
conformity of production (CoP) (Annex IV of Delegated Regulation (EU) No 44/2014)
access to repair and maintenance information (Annex XV of Delegated Regulation (EU) No 44/2014)
LIST I — Environmental and propulsion unit performance requirements
Appendix | System or component/separate technical unit (STU) | Commission Delegated Regulation (EU) No 134/2014 Annex number | As amended by and/or at the stage of implementation
1 | System: tailpipe pollution-control system | II, III, V, VI |
2 | System: crankcase and evaporative emissions | IV, V |
3 | System: environmental and functional on-board diagnostic (OBD) |
VIII
(and Annex XII to Commission Delegated Regulation (EU) No 44/2014)
4 | System: sound level | IX |
5 | System: propulsion unit performance | X |
5a | System: maximum torque and a maximum net power of a propulsion unit |
X
Appendix 2
6 | STU: pollution-control device | II, III, IV, V, VI |
7 | STU: noise-abatement device | IX |
8 | STU: exhaust device (pollution-control device and noise-abatement device) | II, III, V, VI, IX |
LIST II — Vehicle functional safety requirements
Appendix | System or component/separate technical unit (STU) | Commission Delegated Regulation (EU) No 3/2014 Annex number | As amended by and/or at the stage of implementation
8a | System: installation of audible warning devices | II |
9 | System: braking | III |
9a | System: installation of glazing, windscreen wipers and defrosting and demisting devices | VII |
9b | System: identification of controls, tell-tales and indicators | VIII |
10 | System: installation of lighting and light-signalling devices | IX |
11 | System: Roll-over protective structure (ROPS) | XI |
11a | System: safety belt anchorages | XII |
11b | System: steer-ability, cornering properties and turn ability | XIV |
12 | System: installation of tyres | XV |
13 | Component: audible warning device | II |
13a | System: vehicle occupant protection, including interior fittings, head restraint and vehicle doors | XVII |
14 | Component/STU: non-glazing front windscreen | VII |
15 | Component/STU: windscreen washer device | VII |
16 | Component/STU: rearward visibility device | X |
17 | STU: safety belts | XII |
18 | Component/STU: seating position (saddle/seat) | XIII |
LIST III — Vehicle construction and general type-approval requirements
Appendix | System or component/separate technical unit (STU) | Commission Delegated Regulation (EU) No 44/2014 Annex number | As amended by and/or at the stage of implementation
19 | STU: trailer coupling device | V |
20 | STU: devices to prevent unauthorised use | VI |
20a | STU: fuel tank | IX |
21 | STU: passenger handholds | XIII |
22 | STU: footrests | XIII |
23 | STU: side-car |
VIII, XI, XIII;
(and Annexes III, V, VII, IX, X, XII, XIII, XIV, XV, XVII and XIX to Commission Delegated Regulation (EU) No 3/2014)
2.3.
Matrix showing the combinations of the entries listed in point 2.6. within the versions and variants of the vehicle type
Item No | All | Version 1 | Version 2 | Version 3 | Version n
2.3.1. A separate matrix shall be compiled for each variant within the type.
2.3.2. Entries with no restrictions on their combination within a variant shall be listed in the column headed ‘All’.
2.3.3. The above information may be presented in an alternative format or merged with the information supplied under point 2.6.
2.4.1.
The manufacturer shall allocate an alphanumeric code to each vehicle type, variant and version, made up of Roman letters and/or Arabic numerals, which shall also be indicated in the certificate of conformity (see Annex IV) of the vehicle concerned.
The use of brackets and hyphens is permitted provided they do not replace a letter or a numeral.
2.4.2.
The whole code shall be designated: Type-Variant-Version or ‘TVV’.
2.4.3.
The TVV shall clearly and unequivocally identify a unique combination of technical features in relation to the criteria defined in Part B of this Annex.
2.4.4.
The same manufacturer may use the same code in order to define a vehicle type when the latter falls in two or more categories.
2.4.5.
The same manufacturer shall not use the same code in order to define a vehicle type for more than one type-approval within the same vehicle category.
2.4.6.1. The number of characters shall not exceed:
15 for the code of the vehicle type;
25 for the code of one variant;
35 for the code of one version.
2.4.6.2. The complete alphanumeric ‘TVV’ shall not contain more than 75 characters.
2.4.6.3. When the TVV is used as a whole, a space shall be left between the type, the variant and the version.
Example of such TVV: 159AF[… space]0054[… space]977K(BE).
2.5.
For those subjects referred to in Annex II to Regulation (EU) No 168/2013 whose approvals have been granted in accordance with the UNECE regulations referred to in Article 54 of Regulation (EU) 168/2013 (UNECE approvals), the manufacturer shall supply the information required in point 2.7. only if it is not already provided in the correspondent approval certificate and/or test report. However, the information referred to in the certificate of conformity (Annex IV) shall be supplied in any case.
2.6.