1 ANNEX, Decision_act (EU) 2014/350

In forcesince 27 Jul 2017

The criteria for awarding the EU Ecolabel to textile products, and the sub-categories under which they are grouped, are as follows:

1.

Cotton and other natural cellulosic seed fibres

2.

Flax and other bast fibres

3.

Wool and other keratin fibres

4.

Acrylic

5.

Elastane

6.

Polyamide

7.

Polyester

8.

Polypropylene

9.

Man-made cellulose fibres (lyocell, modal and viscose)

10.

Fillings

11.

Coatings, laminates and membranes

12.

Accessories

13.

Restricted Substance List (RSL)

14.

Substitution of hazardous substances in dyeing, printing and finishing

15.

Washing, drying and curing energy efficiency

16.

Treatment of emissions to air and water

17.

Dimensional changes during washing and drying

18.

Colour fastness to washing

19.

Colour fastness to perspiration (acid, alkaline)

20.

Colour fastness to wet rubbing

21.

Colour fastness to dry rubbing

22.

Colour fastness to light

23.

Wash resistance of cleaning products

24.

Fabric resistance to pilling and abrasion

25.

Durability of function

26.

Fundamental principles and rights at work

27.

Restriction on the sandblasting of denim

28.

Information appearing on the Ecolabel

Appendix 1 additionally contains the RSL referred to in criterion 13. This lists restrictions applying to hazardous substances that may be used to manufacture textile products and which may be contained in the final product.

The Ecolabel criteria reflect the best environmental performing products on the market of textiles. Whilst the use of chemical products and release of pollutants is part of the production process, a product that bears the EU Ecolabel guarantees the consumer that the use of such substances has been limited to the extent technically possible without prejudice to the fitness for use.

The criteria exclude whenever possible or restrict at minimum the concentration (required for providing specific functions and properties) of a number of substances identified as hazardous or potentially hazardous to the human health and the environment that may be used to manufacture textiles. Only where a substance is required to meet consumer performance expectations or mandated requirements for the product (for instance flame retardancy), and where there are no applied and tested available alternatives, derogation for such a substance to be used in the Ecolabel is granted.

Derogations are evaluated on the basis of the precautionary principle and scientific and technical evidence, especially if safer products are available on the market.

Product testing for restricted hazardous substances is requested in order to provide a high level of assurance to consumers. Strict conditions are also imposed on the manufacturing processes for textiles to control pollution of water and air, and to minimise exposure of the workforce. The verification of compliance with the criteria is formulated in a way that provides a high level of assurance to consumers, reflects the practical potential for applicants to obtain information from the supply chain and excludes the potential for ‘free riding’ by applicants.

Assessment and verification

In order to show compliance with the criteria the applicant is required to declare the following information about the product(s) and their supply chain:

Criteria set | Verification source

(a)

Textile fibre criteria: The complete material composition of the product(s), identifying and showing compliance for textile fibres, components and accessories;

Fibre and component manufacturers, their raw material and chemical suppliers and testing laboratories working in accordance with the specified test methods.

(b)

Chemicals and processes: The substances, production recipes and technologies used to manufacture and impart specific qualities and functions to the product at the spinning, pre-treatment, dyeing, printing and finishing stages and to treat air and wastewater emissions;

Production sites, their chemical suppliers and testing laboratories working in accordance with the specified test methods. Where required product analytical testing shall be carried out annually during the license period and submitted to the appropriate competent body for verification.

(c)

Fitness for use: The performance of the product(s) as defined by specific testing procedures which address colour fastness under specific conditions, resistance to pilling and abrasion, and the durability of repellency, easycare and flame retardancy functions;

Testing laboratories working in accordance with specified test methods.

(d)

Corporate Social Responsibility: Compliance of the applicants' selected cut/make/trim suppliers with the defined ILO standards.

Independent verifiers or documentary evidence based on the auditing of cut/make/trim production sites.

Each criteria contains detailed verification requirements which require the applicant to compile declarations, documentation, analyses, test reports and other evidence relating to the product(s) and their supply chain.

The validity of the license is based on verification upon application and, where specified under criterion 13, product testing which shall be submitted to competent bodies for verification. Changes in suppliers and production sites pertaining to licensed products shall be notified to competent bodies, together with supporting information to verify ongoing compliance with the license conditions.

Competent bodies shall preferentially recognise tests by laboratories which are accredited according to ISO 17025 and verifications performed by bodies which are accredited under the EN 45011 standard or an equivalent international standard.

The functional unit, to which inputs and outputs should be related, is 1 kg of textile product at normal conditions (65 % RH ± 4 % and 20 oC ± 2 °C; these norm conditions are specified in ISO 139 Textiles — standard atmospheres for conditioning and testing).

Where the applicant uses a certification system to provide independent verifications the chosen system and associated systems for accreditation of verifiers shall meet the general requirements of EN 45011 and ISO 17065. Where appropriate, competent bodies may require supporting documentation and may carry out independent verifications and site visits.

The competent bodies are recommended to take into account the implementation of recognised environmental management schemes, such as EMAS, ISO 14001 and ISO 50001, when assessing applications and monitoring compliance with the criteria (note: it is not required to implement such management schemes).

Applicants shall demonstrate the compliance with the criteria as relevant to the material composition, chemical formulations, production sites and fitness for use of products they wish to carry the Ecolabel.

Fibre-specific criteria are set out in this section for the following fibre types:

(a)

Natural fibres: Cotton and other natural cellulosic seed fibres, flax and other bast fibres, wool and other keratin fibres;

(b)

Synthetic fibres: Acrylic, elastane, polyamide, polyester and polypropylene;

(c)

Man-made cellulose fibres: lyocell, modal and viscose.

Any fibre, including the above listed ones, may be used without having to meet the textile fibre criteria if it contributes to less than 5 % of the total weight of the product or if it constitutes a padding or lining. With the exception of polyamide and polyester the textile fibre criteria do not have to be met in the following cases:

(i)

By the whole product if the fibres contain recycled content that in total amounts to at least 70 % by weight of all the fibres in the product;

(ii)

By individual fibres forming part of the ecolabelled product where the fibre type contains at least 70 % by weight of recycled content.

For the purposes of calculating the percentage of cotton in a product that shall be required to comply with criterion 1(a) or 1(b), the recycled cotton fibre content shall be deducted from the required minimum percentages except in the case of clothing for babies under 3 years old.

In this context, fibres that contain a recycled content are defined as fibres originating from pre-consumer waste (including polymer and fibre production waste, cuttings from textile and clothing manufacturers) and post-consumer waste (textile and all kind of fibre and textile products, as well as non-textile waste including PET drinking bottles and fishing nets).

Recycled content shall, with the exception of PET bottles used to manufacture polyester, meet the requirements of the criterion 13 RSL. This shall include annual, randomised analytical testing for specified substance groups.

Assessment and verification for recycled contentrecycled content shall be traceable back to the reprocessing of the feedstock. This shall be verified by independent third party certification of the chain of custody or by documentation provided by feedstock suppliers and reprocessors. Where required by criterion 13 declarations and laboratory testing results shall be provided by fibre manufacturers and feedstock suppliers.

Cotton and other natural cellulosic seed fibres (hereinafter referred to as cotton) shall contain a minimum content of either organic cotton (see criterion 1a) or integrated pest management (IPM) cotton (see criterion 1b). In addition to this:

All conventional cotton and IPM cotton used shall comply with the pesticide restrictions in criterion 1c,

Only in case an organic cotton claim is made under criterion 28, for the production standard 1(a), all conventional cotton and IPM cotton that is blended with organic cotton shall come from non-genetically modified varieties,

For the purposes of calculating the percentage of cotton in a product that shall be required to comply with criterion 1(b), any organic cotton fibre content shall be deducted from the required minimum percentage,

All organic and IPM cotton shall be fully traceable in accordance with criterion 1(d), with verification accepted based on the annual volume of cotton purchased or the content of the final product,

Clothing for babies of less than 3 years old shall contain a minimum of 95 % organic cotton.

Products meeting specific content thresholds for organic or IPM cotton shall be permitted to display additional text alongside the Ecolabel communicating the content claim. Guidance is provided in criterion 28.

With the exception of the products listed below a minimum of 10 % of the cotton shall be grown according to the requirements laid down in Council Regulation (EC) No 834/2007 [Council Regulation (EC) No 834/2007 of 28 June 2007 on organic production and labelling of organic products and repealing Regulation (EEC) No 2092/91 (OJ L 189, 20.7.2007, p. 1).], the US National Organic Programme (NOP) or equivalent legal obligations set by trade partners of the EU. The organic cotton content may include organically grown cotton and transitional organic cotton.

The cotton content of the following products shall contain a minimum of 95 % organic cotton: T-shirts, woman's tops, casual shirts, jeans, pyjamas and nightwear, underwear and socks.

Assessment and verificationOrganic content should be certified by an independent control body to have been produced in conformity with the production and inspection requirements laid down in Regulation (EC) No 834/2007 the US National Organic Programme (NOP) or those set by other trade partners. Verification shall be provided on an annual basis for each country of origin.

For conventional and IPM cotton that is blended with organic cotton, a qualitative screening test for common genetic modifications carried out according to EU Reference Methods for GMO analysis [European Commission, European Union Reference Laboratory for GM Food and Feed — Qualitative GMO detection PCR methods, http://gmo-crl.jrc.ec.europa.eu/gmomethods/] and indicating a GMO-free result shall be accepted as a proof of compliance. Tests shall be made on samples of raw cotton from each country of origin and before it passes through any wet treatment. Certification of IPM cotton by schemes that exclude genetically modified cotton shall be accepted as proof of compliance.

A minimum of 20 % of the cotton shall be grown according to IPM principles as defined by the UN Food and Agricultural Organisation (FAO) IPM programme, or Integrated Crop Management (ICM) systems incorporating IPM principles, and shall comply with the pesticide restrictions in criterion 1(c).

For the following products the minimum percentage of the cotton that shall be grown according to IPM principles as defined above shall be 60 %: T-shirts, woman's tops, casual shirts, jeans, pyjamas and nightwear, underwear and socks.

Assessment and verificationThe applicant shall provide evidence that the cotton has been grown by farmers that have participated in formal training programmes of the UN FAO or Government IPM and ICM programmes and/or that have been audited as part of third party certified IPM schemes. Verification shall either be provided on an annual basis for each country of origin or on the basis of certifications for all IPM cotton purchased to manufacture the product.

Compliance with the pesticide restriction shall not be required for schemes that prohibit use of the substances listed in criterion 1(c) and where either testing is carried out or declarations of non-use are obtained from farmers and/or farmer producer groups that are verified by site visits carried out by control bodies accredited by either national governments or recognised organic or IPM certification schemes.

Non-genetically modified IPM cotton used in combination with organic cotton shall be verified in conformity with Regulation (EC) No 1830/2003. IPM schemes that exclude genetically modified cotton shall be accepted as proof of compliance for IPM content.

All cotton used in ecolabelled textile products, with the exception of organic cotton and cotton from IPM schemes exempted in 1(b), shall be grown without the use of any of the following substances:

Aldicarb, aldrin, campheclor (toxaphene), captafol, chlordane, 2,4,5-T, chlordimeform, cypermethrin, DDT, dieldrin, dinoseb and its salts, endosulfan, endrin, heptachlor, hexachlorobenzene, hexachlorocyclohexane (total isomers), methamidophos, methylparathion, monocrotophos, neonicotinoids (clothianidine, imidacloprid, thiametoxam), parathion, pentachlorophenol.

The sum total of the listed pesticides detected upon testing of the cotton shall not be greater than 0,5 ppm.

Assessment and verification

Cotton shall be tested for the listed substances. A test report shall be provided based on the following test methods, as appropriate:

US EPA 8081 B (organo-chlorine pesticides, with ultrasonic or Soxhlet extraction and apolar solvents (iso-octane or hexane)),

US EPA 8151 A (chlorinated herbicides, using methanol),

US EPA 8141 B (organophosphorus compounds),

US EPA 8270 D (semi-volatile organic compounds).

Tests shall be made on samples of raw cotton from each country of origin and before it passes through any wet treatment. For each country of origin testing shall be carried out on the following basis:

(i)

Where only one lot of cotton is used per year a sample shall be taken from a randomly selected bale;

(ii)

If two or more lots of cotton are used per year composite samples shall be taken from 5 % of the bales.

Cotton is not required to be tested where it has been certified by an IPM scheme that prohibits the use of the listed substances.

All cotton grown according to the organic and IPM production standards and used to manufacture an Ecolabelled textile product shall be traceable from the point of verification of the production standard up until, as a minimum, greige fabric production.

Assessment and verification

the applicant shall demonstrate compliance with the minimum cotton content requirement either for the annual volume of cotton purchased or for the blend of cotton used to manufacture the final product(s) and according to each product line:

(i)

On an annualised basis: Transaction records and/or invoices shall be provided that document the quantity of cotton purchased on an annual basis from farmers or producer groups, and/or the total weight of certified cotton, up until greige fabric production;

(ii)

On a final product basis: Documentation corresponding to the quantity of cotton used in each final product shall be provided from the spinning and/or fabric production stages. All documentation shall reference the Control Body or certifier of the different forms of cotton.

2(a)

Flax and other bast fibres shall be retted under ambient conditions and without thermal energy inputs.

Assessment and verificationthe applicant shall provide a declaration of the retting method used from the farmers and/or scutching mills supplying the fibre.

2(b)

Where water retting has been used the wastewater from retting ponds shall be treated so as to reduce the COD or TOC by at least 75 % for hemp fibres and by at least 95 % for flax and other bast fibres.

Assessment and verificationif water retting is used, the applicant shall provide a test report showing compliance and using the following test method: ISO 6060 (COD).

3(a)

The sum totals provided in Table 2 shall not be exceeded for wool ectoparasiticide concentrations on raw wool prior to scouring.

These requirements shall not apply if documentary evidence can be presented that establishes the identity of the farmers producing at least 75 % of the wool or keratin fibres in question, together with an independent verification based on site visits that the substances listed above have not been applied to the fields or animals concerned.

Ectoparasiticide groups | Sum total limit value

γ-hexachlorocyclohexane (lindane), α-hexachlorocyclohexane, β-hexachlorocyclohexane, δ-hexachlorocyclohexane, aldrin, dieldrin, endrin, p,p'-DDT, p,p'-DDD | 0,5 ppm

Cypermethrin, deltamethrin, fenvalerate, cyhalothrin, flumethrin | 0,5 ppm

Diazinon, propetamphos, chlorfenvinphos, dichlofenthion, chlorpyriphos, fenchlorphos | 2 ppm

Diflubenzuron, triflumuron, dicyclanil | 2 ppm

Wool scourers that operate closed loop water systems without the discharge of wastewater effluent and which break down the aforementioned ectoparasiticides that may be present in scouring residues and sludge through incineration are derogated from the requirement for wool testing but must comply with at least two of the measures in 3(c).

Assessment and verification

the applicant shall either provide the documentation indicated above or compile test reports, using the following test method: IWTO draft test method 59. The test should be made on farmer or sales lots of raw wool, by country of origin (if mixed) and before any wet processing. A minimum of one composite sample of multiple farmer or sales lots from each country of origin shall be tested per processing lot. A composite sample should consist of either of the following:

(i)

wool fibres from at least 10 randomly selected farmer or sales lots (by country of origin), where there are more than 10 sales lots for that country of origin within the processing lot;

(ii)

one sample per sales lot or farmer lot (whichever is less) supplying the processing lot where there are less than 10 sales lots for that country of origin within the processing lot.

Alternatively test reports may be submitted for all farmer or sales lots in a processing lot.

Where a derogation applies then the applicant shall provide evidence confirming the scouring plant configuration and laboratory test reports demonstrating the breakdown of ectoparasiticides that may be present in scouring residues and sludge.

3(b)

Wool scouring operations shall minimise effluent COD by maximising dirt removal and grease recovery, followed by treatment to the value specified in Table 3 either on or off site. The following COD limits shall apply to coarse and fine greasy wool scouring. Fine wool is defined as merino wool of ≤ 23,5 micron in diameter.

Type of wool | Final discharge to the environment (g COD/kg greasy wool)

Coarse wool | 25 g/kg

Fine wool | 45 g/kg

Assessment and verificationthe applicant shall provide relevant data and test reports related to this criterion, using the following test method: ISO 6060. The data shall demonstrate compliance by the wool scouring site or, if the effluent is treated off-site, by the wastewater treatment operator. Compliance with this criterion shall be on the basis of monthly averages for the six months preceding the application.

3(c)

Wool scourers shall implement at least one of the following measures to recover value from either oxidised grease, fibre, suint or sludge arising from the scouring site used for the ecolabelled wool products:

(i)

recovery for sale as a chemical feedstock;

(ii)

the production of compost or liquid fertiliser;

(iii)

the manufacturing of products such as building materials;

(iv)

treatment and energy recovery by anaerobic digestion or incineration.

Assessment and verificationthe applicant shall provide a report and waste transfer notes confirming the type and proportion of waste recovered and the method used.

4(a)

The emissions to air of acrylonitrile (during polymerisation and up to the solution ready for spinning), expressed as an annual average, shall be less than 1,0 g/kg of fibre produced.

Assessment and verificationthe applicant shall provide detailed documentation and/or test reports showing compliance with this criterion, together with a declaration of compliance from the fibre manufacturer(s).

4(b)

The workplace emissions to air of N,N-dimethylacetamide (127-19-5) during polymerisation and spinning shall not exceed an Indicative Occupational Exposure Limit Value (IOELV) of 10,0 ppm.

Assessment and verificationemissions values are to be measured at those process stages in which the substances are used, expressed as an 8-hour average value (shift mean value). The applicant shall provide test reports and monitoring data from the fibre manufacturer(s) showing compliance with this criterion.

5(a)

Organotin compounds shall not be used to manufacture the fibres.

Assessment and verificationthe applicant shall provide a declaration of non-use from the fibre manufacturer(s).

5(b)

The workplace emissions to air of the following substances during polymerisation and spinning shall not exceed the following indicative occupational exposure limit values (IOELV):

(i)

diphenylmethane-4,4'-diisocyanate (101-68-8) 0,005 ppm

(ii)

toluene-2,4-diisocyanate (584-84-9) 0,005 ppm

(iii)

N,N-dimethylacetamide (127-19-5) 10,0 ppm

Assessment and verificationemissions values are to be measured at those process stages in which the substances are used, expressed as an 8-hour average value (shift mean value). The applicant shall provide test reports and monitoring data from the fibre manufacturer(s) showing compliance with this criterion.

Polyamide products shall comply with at least one of the production standards listed in sub-criteria 6(a) and 6(b).

This article is long: the rest is at the official publication.