1 ANNEX, Decision_act (EU) 2013/121

In forcesince 7 Mar 2013

When used as intended or in a foreseeable way and bearing in mind the behaviour of children, products must not jeopardise the safety or health of children and carers.

If one type of chair can be converted into another type of chair (for example, a high chair into a children’s chair), it must comply with safety requirements for both types of chairs.

Labels on the products or on their packaging and the accompanying instructions for use must draw the attention of users to the inherent hazards and risks of injuries involved in using the products and to ways of avoiding them. However, products need to be safe by design as far as possible, and therefore labels and warnings must not replace safety by design.

All products referred to in Article 1 must comply with EU legislation.

Products referred to in Article 1 must not constitute dangerous instantly flammable elements in the child’s environment. They must therefore be made of materials that do not produce a flash effect if directly exposed to a flame or spark. For this reason, the latest version of EN 71-2 should be taken into account.

The use of chemical flame retardant substances should be kept to the minimum. If chemical flame retardant substances are used, their toxicity during use and their end-of-life disposal should not endanger the health of the user, the child’s carers or the environment.

Bags made of flexible plastics that are used for packaging, and that have an opening perimeter larger than the circumference of a child’s head, must not put the child at risk of suffocation. The use of drawstrings or cords to close such packaging, or to close self-adhesive packaging (e.g. ‘cling-film’ type packaging) is prohibited.

The packaging that contains the products must not present a risk of suffocation caused by an obstruction of the mouth and nose. To this end, when not incompatible with moisture exclusion, plastic packaging should be perforated.

Bags must be conspicuously marked with the following warning or an equivalent warning: ‘WARNING! Keep packaging away from children to prevent them from suffocating’. They must also bear a large, clear symbol or diagram indicating that there is a potential hazard.

Manufacturers [As defined in Article R1 of Chapter R1 of Annex I to Decision No 768/2008/EC of the European Parliament and of the Council (OJ L 218, 13.8.2008, p. 82).] must indicate their name, registered trade name or registered trade mark and the address at which they can be contacted on the product or, when that is not possible, on its packaging or in a document accompanying the product. The address must indicate a single point at which the manufacturer can be contacted [As specified in Article R2 of Chapter R2 of Annex I to Decision No 768/2008/EC.].

Importers [As defined in Article R1 of Chapter R1 of Annex I to Decision No 768/2008/EC.] must indicate their name, registered trade name or registered trade mark and the address at which they can be contacted on the product or, when that is not possible, on its packaging or in a document accompanying the product [As specified in Article R4 of Chapter R2 of Annex I to Decision No 768/2008/EC.].

These safety requirements apply to chair-mounted seats intended for children up to the age of 36 months who weigh a maximum of 15 kg. They do not apply to cushions, pads and any products intended to restrain a child on a chair without raising the child’s sitting position.

Chair-mounted seats must be designed and manufactured to prevent the entrapment of any part of a child’s body.

Chair-mounted seats in which the height of the sitting area can be adjusted must have locking mechanism(s) to secure the chair-mounted seat in its position of normal use. The unintentional release of locking mechanism(s) must be prevented.

Once the chair-mounted seat is set up for normal use, there must not be any accessible compression or shear points as a result of moving the chair-mounted seat or any part of it, the child’s shifting its body weight while in the chair-mounted seat, or the application of an external force (either by another child or, unintentionally, by the carer, or by a powered mechanism).

Chair-mounted seats designed to fold must have a folding mechanism that a child cannot operate and that a carer cannot inadvertently trigger. It must not be possible to set up chair-mounted seats for normal use without activating the locking mechanism.

Once it is set up for normal use, the chair-mounted seat must ensure that the child remains in it and that it does not overturn when he or she leans in any direction. To avoid injuries due to the child’s standing up and falling or slipping out of the chair-mounted seat, it must be designed in such a way that its restraint system prevents the child from standing up and falling or slipping out of it.

The chair-mounted seat must be fitted with a restraint system that can be adjusted to the size of the child and must consist of at least a waist and crotch restraint. It must not be possible to use the restraint system without using the crotch restraint.

The restraint system, straps, anchoring points and fastening system must suffer no permanent damage which can impair their safety and normal function when subjected to static and dynamic mechanical stress during reasonable foreseeable use of the chair-mounted seat.

When mounted for use, the height of the backrest of the chair-mounted seat must be appropriately high. It must also be fitted with side armrests that are high enough to ensure that a child remains in the seat when he or she leans in any direction.

Cords, ribbons and similar parts, except the child restraint system and chair attachment system, that are accessible from inside the chair-mounted seat, must have a maximum free length that prevents a hazardous loop from forming around a child’s neck.

Monofilament threads must not be used as cords, ribbons and similar parts, as loops or as sewing threads.

To prevent choking hazards, chair-mounted seats must not contain any small parts, whether intended to be removed without a tool or not, that could become detached by forces that a child can apply and are small enough to fit entirely in a child’s mouth.

Stuffing materials that constitute choking hazards must not become accessible when submitted to the forces that a child can apply. They must not constitute an additional choking hazard due to the size of the elements they contain or because these elements become sufficiently small or accessible when submitted to the forces that a child can apply.

To avoid the hazard of ingestion, chair-mounted seats must not contain separate or small parts that are detachable by forces that a child can apply and can pass through the child’s oesophagus. In any case, toxic materials or surfacing must not be used.

Chair-mounted seats must not have any plastic decals that could be gripped by a child and detached by forces that a child can apply. They must not have any impermeable sheeting that could cover both the mouth and the nose of the child and thus constitute suffocation hazards.

All accessible edges, corners and protruding parts of the chair-mounted seat must be rounded and they must not contain burrs or sharp edges.

All surfaces must, to the extent compatible with the functions of the chair-mounted seat, be smooth enough to prevent abrasions, cuts, scratches, grazes, burns or other injuries which might be caused incidentally while the chair-mounted seat is in use or by a child’s behaviour.

The chair-mounted seat must not collapse or show any sign of damage or permanent deformation which can impair its safety and normal function. Any mechanism(s) for adjusting the height of the chair-mounted seat must not allow the height position chosen to be changed due to mechanical stress to which the chair-mounted seat is subjected during reasonable foreseeable use.

The chair attachment system must be designed to fix the chair-mounted seat both to the backrest and to the seat surface of the chair.

The chair attachment system, straps, anchoring points and fastening system must not break, become loose or tear away from their support due to mechanical stress to which they are subjected during reasonable foreseeable use.

The product information must specify the adequate dimensions of the seat and of the backrest of the chairs for which the product is intended.

Safety information must be marked on the product and included in the instructions to the user.

Safety information must be given in writing in the language(s) of the country in which the chair-mounted seat is offered for retail sale and in self-explanatory pictograms. All markings must remain legible and any label used for the markings must not come off easily.

Essential safety information must be provided, in a clear and conspicuous way. It must be clearly displayed and remain visible after attaching the chair-mounted seat to the adult chair and before the child is placed in the chair-mounted seat. The information must be labelled ‘WARNING!’ and must convey at least the following messages or equivalent messages:

‘Never leave the child unattended.’

‘Always use the child restraint and chair attachment systems.’

‘Always check the security and the stability of the chair-mounted seat before use.’

‘This product is intended for children up to 36 months old, weighing a maximum of 15 kg, who are able to sit up unaided.’

The consumer must be able to clearly see the purchase information at the point of sale. It must contain at least the following, both in writing and in a self-explanatory pictogram:

this statement or an equivalent statement: ‘This product is intended for children up to 36 months old, weighing a maximum of 15 kg, who are able to sit up unaided.’,

the adequate dimensions of the adult chair, seat and backrest.

The chair-mounted seat must come with a user manual. The user manual must contain:

the following statement or an equivalent statement: ‘IMPORTANT! KEEP FOR FUTURE REFERENCE.’,

instructions for correct and safe assembly and use of the chair-mounted seat,

information on the types of adult chairs to which the chair-mounted seat can and cannot be attached.

The warnings in the user manual must be labelled ‘WARNING!’ and must convey at least the following messages or equivalent messages:

‘Never leave the child unattended.’

‘Always use the child restraint and chair attachment systems.’

‘Ensure the chair attachment system is correctly fitted and adjusted before use.’

‘Always check the security and the stability of the chair-mounted seat before use.’

The user manual must also provide the following information:

the following statement or an equivalent statement: ‘This product is intended for children up to 36 months old, weighing a maximum of 15 kg, who are able to sit up unaided.’,

the adequate dimensions of the adult chair, seat and backrest,

a statement that the chair-mounted seat should not be used if any part is broken, torn or missing,

a statement that accessories or replacement parts other than those approved by the manufacturer must not be used,

cleaning and maintenance recommendations.

These safety requirements apply to children’s chairs intended for children who are able to sit up unaided. These include stools, chairs (assembly parts include: legs, seat base and backrest) and armchairs (assembly parts include: seat base, backrest and armrests) for indoor and outdoor use. Rocking chairs and foldable chairs are also included. The requirements also apply to multifunctional products that can be converted into children’s chairs. They also apply to children’s chairs fitted with wheels. Products that combine the function of a children’s chair with another function (for example, storage) must also comply with the requirements.

Children’s chairs must be designed and manufactured to prevent the entrapment of limbs, feet and hands and as far as possible the entrapment of fingers in gaps and openings.

Foldable children’s chairs must be designed and manufactured to prevent the entrapment of fingers.

Children’s chairs must not be so heavy that a child’s head or limb can be entrapped under them.

Once the children’s chair is set up for normal use according to the manufacturer’s instructions, there must not be any hazardous moving parts.

Children’s chairs that are fitted with wheels or castors must be designed so as not to impair their stability.

Children’s chairs must be stable enough to prevent overturning in all directions while the child is in them.

Children’s chairs must be stable.

To prevent choking hazards, children’s chairs must not contain small parts that can be detached by forces that a child can apply and can fit entirely in a child’s mouth. Stuffing materials that constitute choking hazards must not become accessible when submitted to the forces that a child can apply. They must not constitute an additional choking hazard due to the size of the elements they contain or because these elements become sufficiently small or accessible when submitted to the forces that a child can apply.

Children’s chairs must not have any plastic decals that are detachable by forces that a child can apply. They must not have any impermeable sheeting that could cover both the mouth and the nose and thus constitute suffocation hazards.

To avoid the hazard of ingestion, children’s chairs must not contain separate or small parts that are detachable by forces that a child can apply and can pass through the child’s oesophagus. In any case, toxic materials or surfacing must not be used.

All surfaces must, to the extent compatible with the functions of the children’s chair, be smooth enough to prevent abrasions, cuts, scratches, grazes, burns or other injuries which might be caused incidentally while the chair is in use or by a child’s behaviour.

Children’s chairs must not have sharp edges or points. Accessible edges and corners must be rounded or chamfered. They must not have any pointed or protruding surface that constitutes a puncture hazard.

Children’s chairs and their components such as the seat base, backrest and legs, must be able to withstand mechanical stress to which they are subjected during reasonable foreseeable use.

Warnings and instructions for use must indicate to the parents or carers that children’s chairs located under a window could be used as a step by the child and cause the child to fall out of the window.

Safety information must be given in writing in the language(s) of the country in which the children’s chair is offered for retail sale and in self-explanatory pictograms. All markings must remain legible and any label used for the markings must not come off easily.

These safety requirements apply to high chairs intended for children who are able to sit up unaided, from approximately six months to 36 months of age, weighing a maximum of 15 kg. If the children’s high chairs are designed to be converted into children’s chairs, they must also comply with the safety requirements that apply to children’s chairs.

If parts of the high chair are designed to be removable (e.g. a tray or a footrest), these safety requirements apply to the high chair with and without these part(s).

Products with a significant play value must also comply with the requirements of Directive 2009/48/EC of the European Parliament and of the Council [OJ L 170, 30.6.2009, p. 1.] on the safety of toys (for example, a high chair that can be converted into a rocking horse).

Connecting screws for direct fastening (e.g. self-tapping screws) must not be used for the assembly of any component that is designed to be removed or loosened when dismantling the high chair to transport or store it.

Exposed edges and protruding parts must be rounded or chamfered and they must not contain burrs or sharp edges.

To avoid injuries due to the child’s standing up and falling or slipping out of the high chair, it must be designed in such a way that its restraint system prevents the child from standing up and falling or slipping out of it.

The high chair must be fitted with a restraint system that can be adjusted to the size of the child and must consist of at least a waist and crotch restraint. It must not be possible to use the restraint system without using the crotch restraint.

The restraint system, straps, anchoring points and fastening system must not break, become loose or tear away from their support under the internal and external forces that a child can apply.

The design of the restraint system must take into account all of a child’s potential movements in the high chair.

The height of the backrest of the high chair must be appropriately high. It must also be fitted with side armrests that are high enough to ensure that a child remains in the chair when he or she leans in any direction.

To avoid injuries due to the child’s pushing and/or pressing his or her feet against the dining table and forcing the high chair to fall backwards, it must be designed in such a way that its stability precludes a falling hazard.

There must be no cords, ribbons or similar parts (with the exception of the restraint system) on high chairs that constitute entanglement hazards.

Children’s high chairs must be designed and manufactured to prevent the entrapment of any part of a child’s body.

To avoid the risk of shearing and crushing, shear and compression points must be avoided. If shear and compression points cannot be avoided for functional reasons, appropriate measures should be taken to ensure that they are safe.

Any part of the high chair that can fold or be detached must be locked so that a child using the product or another child cannot release it or an adult cannot inadvertently release it.

Locking mechanisms are required to prevent a high chair from folding while a child is in it and also when a child is being put in and taken out of it.

To avoid hazards arising from incorrect use of the high chair, either the weight of the child using the high chair must prevent it from folding or at least one locking mechanism must engage automatically when the high chair is being used.

Children must not be able to unintentionally release or operate the locking mechanisms.

Any locking mechanisms must continue to function properly when subjected to static and dynamic mechanical stress during reasonable foreseeable use of the high chair.

No part that can be detached by the force that a child can apply must be small enough to fit entirely in a child’s mouth. Any component that can be removed without the use of a tool must not fit entirely in a child’s mouth. Stuffing materials that constitute choking hazards must not become accessible when submitted to the forces that a child can apply. Furthermore, they must not constitute an additional choking hazard due to the size of the elements they contain or because these elements become sufficiently small or accessible when submitted to the forces that a child can apply.

The high chair must be designed to secure children in the sitting position and to prevent falls when they stand up and lose their balance, either by using a restraint system comprising a crotch restraint and a horizontal component or by means of an integral harness. If the high chair is fitted with a reclinable backrest, it must have an integral harness.

Static and dynamic mechanical stress during reasonable foreseeable use of the high chair must not cause permanent damage, which can impair their safety and normal function, to crotch restraints, waist belts and straps of the integral harness.

When a high chair is fitted with a harness or belt attachment points, static and dynamic mechanical stress during reasonable foreseeable use of the high chair must not cause permanent damage to them which can impair their safety and normal function.

If an integral harness or a belt is supplied, it must be adjustable and static and dynamic mechanical stress during reasonable foreseeable use of the high chair must not cause permanent damage to it which can impair its safety and normal function.

The high chair must be fitted with side armrests or other means of lateral protection.

The high chair must be fitted with a backrest high enough to ensure that a child remains in the high chair when he or she leans in any direction.

The mechanism that allows the backrest of the high chair to be adjusted must not slip from one position to another when subjected to static and dynamic mechanical stress during reasonable foreseeable use of the high chair.

High chairs that are fitted with wheels or castors must be designed so as not to impair their stability.

The functions of the high chair must be unimpaired when it is subjected to static and dynamic mechanical stress during reasonable foreseeable use of the high chair.

The high chair must not collapse and the locking mechanism must remain engaged when subjected to static and dynamic mechanical stress during reasonable foreseeable use of the high chair.

If parts of the high chair are designed to be removable (e.g. a tray or a footrest), the stability requirement applies to the high chair with and without these part(s).

When the high chair is subjected to static and dynamic mechanical stress during reasonable foreseeable use, it must not overturn on its side, back or front.

The safety information must be given in writing in the language(s) of the country in which the high chair is offered for retail sale and in self-explanatory pictograms. All markings must remain legible and any label used for the markings must not come off easily during reasonable foreseeable use.

Safety information must be provided, in a clear and conspicuous way. It must be labelled ‘WARNING!’ and must convey at least the following messages or equivalent messages:

‘Never leave the child unattended.’

‘Always use the restraint system.’

‘Always check the security and the stability of the high chair before use.’

The consumer must be able to clearly see the purchase information at the point of sale. The information must contain at least the following statement or an equivalent statement, both in writing and in a self-explanatory pictogram: ‘This product is intended for children up to 36 months old, weighing a maximum of 15 kg, who are able to sit up unaided.’ Additional safety information must be provided if the product can be altered, either to be used for play or to be converted into a children’s chair, that can be adjusted to fit the child at different stages of development (the ‘grow with the child’ feature).

High chairs must be permanently marked with the following warning or an equivalent warning: ‘WARNING! DO NOT LEAVE THE CHILD UNATTENDED.’ An appropriate pictogram must be used in conjunction with the warning.

In the user manual, instructions for use of the high chair must be provided and labelled with the statement ‘IMPORTANT! KEEP FOR FUTURE REFERENCE’ or an equivalent statement.

This article is long: the rest is at the official publication.