1 ANNEX, 2012/90/EU: Commission Recommendation of 14 February 2012 on guidelines for the presenta…

In force

National measures concerning the presentation of the information to be provided at the supplier’s label or document for the marketing of forest reproductive material (hereinafter ‘FRM’) should be developed in cooperation with all relevant stakeholders and in a transparent manner. Member States should also ensure cooperation with other Member States to contribute to reducing the difficulties encountered by stakeholders as a consequence of the differences of the ways this information is presented.

The national measures adopted pursuant to this recommendation should be proportionate to the objective which is pursued, namely the facilitation of the understanding of the information provided in different formats and languages. These measures should avoid any unnecessary burden for forest owners and nurseries.

The choice of measures should take into account the regional and local constraints and characteristics, such as the shape and size of the supplier’s and user’s enterprises, the marketing access, as well as the local, national, Union and supplier’s management practices. They should be proportionate to the level of trades, depending on regional and national specificities and the particular local needs of FRM. These measures could be adopted as national rules, recommendations or guidelines addressed to the suppliers of FRM.

The items to be provided on the supplier’s label or document should be presented as listed in the left column of the below table, following the sequence used in Article 13 and Article 14 of Directive 1999/105/EC. Some additional items, under point C may be added, where appropriate, for traceability and information purposes.

Harmonised identification numbers should be used and presented through the numbers and codes listed in the right column of the below table, serving as numerical translations of the corresponding text in the left column. As these numbers are meant to facilitate retrieval and recognition of the information, they should be added to this information without dropping the fully written, or abbreviated, words of the left column, which are normally used on the suppliers’ labels or documents.

The relevant harmonised identification code should be written in bold before each item to be provided on the supplier’s label or document.

Number on the supplier’s label or document

A. Requirements as listed in Article 13 of Directive 1999/105/EC

Master certificate code and number | 3

Botanical name | 6

Category |

8a ‘source identified’

8b ‘selected’

8c ‘qualified’

8d ‘tested’.

Purpose |

10a ‘multifunctional forestry’

10b ‘other’

Type of basic material |

9a ‘seed source’

9b ‘stand’

9c ‘seed orchard’

9d ‘parents of families’

9e ‘clone’

9f ‘clonal mixture’

Register reference or identity code for region of provenance | 11

Region of provenance — for reproductive material of the ‘source-identified’ and ‘selected’ categories or other reproductive material if appropriate | 13

If appropriate, whether the origin of the material is autochthonous or indigenous, non-autochthonous or non-indigenous, or unknown |

12a ‘autochthonous/indigenous’

12b ‘non-autochthonous/non-indigenous’

12c ‘unknown’

In the case of seed units, the year of ripening | 17

Age of planting stock of seedlings or cuttings, whether undercuts, transplants or containerised | 16

Type of planting stock of seedlings or cuttings, whether undercuts, transplants or containerised |

7a ‘seeds’

7b ‘parts of plants’

7c ‘planting stock (bare root)’

7d ‘planting stock (containers)’

Whether it is genetically modified |

18a ‘yes’

18b ‘no’

B. Requirements as listed in Article 14 of Directive 1999/105/EC

Master certificate number(s) issued under Article 12 of Directive 1999/105/EC or reference to the other document available according to Article 12(3) of that Directive | 3

Name of supplier | 4

Quantity supplied | 15

In the case of reproductive material of the ‘tested’ category whose basic material is approved under Article 4(5) of Directive 1999/105/EC, the words ‘provisionally approved’ | 8x

Whether the material has been vegetatively propagated |

19a ‘yes’

19b ‘no’

In the case of seed, only for quantities above those referred in Article 14(4) of Directive 1999/105/EC

Purity: the percentage by weight of pure seed, other seed and inert matter of the product marketed as a seed lot | 22

The germination percentage of the pure seed, or, where germination percentage is impossible or impractical to assess, the viability percentage assessed by reference to a specified method | 23

The weight of 1000 pure seeds | 24

The number of germinable seeds per kilogram of product marketed as seed, or, where the number of germinable seeds is impossible or impractical to assess, the number of viable seeds per kilogram | 25

In the case of Populus spp. (part of plants)

Class of stem cuttings (EC 1/EC 2) | 26

Class of sets (N1/N2 – S1/S2) | 27

C. Possible additional items for traceability and information purposes

Supplier’s document number | 1

Internal (supplier’s) number of lot | 1a

Date of dispatch of FRM | 2

Full address of supplier | 4

Name and address of the receiver | 5

Country of the region of provenance or of the location | 13

Origin of basic material if non-autochthonous or non-indigenous | 14