1 ANNEX, Commission Regulation (EU) No 1282/2011 of 28 November 2011 amending and correcting Comm…

In forcesince 28 Nov 2011

Annex I to Regulation (EU) No 10/2011 is amended as follows:

(1)

in Table 1 the following lines are inserted in numerical order of the FCM substance numbers:

FCM substance No | Ref. No | CAS No | Substance name |

Use as additive or polymer production aid

(yes/no)

Use as monomer or other starting substance or macro-molecule obtained from microbial fermentation

(yes/no)

FRF applicable

(yes/no)

SML

[mg/kg]

SML(T)

[mg/kg]

(Group restriction No)

Restrictions and specifications | Notes on verification of compliance

(1)

| (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) | (11)

855 | 40560 | | (butadiene, styrene, methyl methacrylate) copolymer cross-linked with 1,3-butanediol dimethacrylate | yes | no | no | | | Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 12 % at room temperature or below. |

856 | 40563 | | (butadiene, styrene, methyl methacrylate, butyl acrylate) copolymer cross-linked with divinylbenzene or 1,3-butanediol dimethacrylate | yes | no | no | | | Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 12 % at room temperature or below. |

857 | 66765 | 0037953-21-2 | (methyl methacrylate, butyl acrylate, styrene, glycidyl methacrylate) copolymer | yes | no | no | | | Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 2 % at room temperature or below. |

863 | 15260 | 0000646-25-3 | 1,10-decanediamine | no | yes | no | 0,05 | | Only to be used as a co-monomer for manufacturing polyamide articles for repeated use in contact with aqueous, acidic and dairy foodstuffs at room temperature or for short term contact up to 150 °C. |

873 | 93460 | | titanium dioxide reacted with octyltriethoxysilane | yes | no | no | | | Reaction product of titanium dioxide with up to 2 % w/w surface treatment substance octyltriethoxysilane, processed at high temperatures. |

894 | 93360 | 0016545-54-3 | thiodipropionic acid, ditetradecyl ester | yes | no | no | | (14) | |

895 | 47060 | 0171090-93-0 | 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoic acid, esters with C13-C15 branched and linear alcohols | yes | no | no | 0,05 | | Only to be used in polyolefins in contact with foods other than fatty/high-alcoholic and dairy products. |

896 | 71958 | 0958445-44-8 | 3H-perfluoro-3-[(3-methoxy-propoxy)propanoic acid], ammonium salt | yes | no | no | | |

Only to be used in the polymerisation of fluoropolymers when:

processed at temperatures higher than 280 °C for at least 10 minutes,

processed at temperatures higher than 190 °C up to 30 % w/w for use in blends with polyoxymethylene polymers and intended for repeated use articles.

923 | 39150 | 0000120-40-1 | N,N-bis(2-hydroxyethyl)dodecanamide | yes | no | no | 5 | | The residual amount of diethanolamine in plastics, as an impurity and decomposition product of the substance, should not result in a migration of diethanolamine higher than 0,3 mg/kg food. | (18)

924 | 94987 | | trimethylolpropane, mixed triesters and diesters with n-octanoic and n-decanoic acids | yes | no | no | 0,05 | | Only for use in PET in contact with all types of foods other than fatty, high-alcoholic and dairy products. |

926 | 71955 | 0908020-52-0 | perfluoro[(2-ethyloxy-ethoxy)acetic acid], ammonium salt | yes | no | no | | | Only to be used in the polymerisation of fluoropolymers that are processed at temperatures higher than 300 °C for at least 10 minutes. |

971 | 25885 | 0002459-10-1 | trimethyl trimellitate | no | yes | no | | | Only to be used as a co-monomer up to 0,35 % w/w to produce modified polyesters intended to be used in contact with aqueous and dry foodstuffs containing no free fat at the surface. | (17)

972 | 45197 | 0012158-74-6 | copper hydroxide phosphate | yes | no | no | | | |

973 | 22931 | 0019430-93-4 | (perfluorobutyl)ethylene | no | yes | no | | | Only to be used as a co-monomer up to 0,1 % w/w in the polymerisation of fluoropolymers, sintered at high temperatures. |

974 | 74050 | 939402-02-5 | phosphorous acid, mixed 2,4-bis(1,1-dimethylpropyl)phenyl and 4-(1,1-dimethylpropyl)phenyl triesters | yes | no | yes | 5 | |

SML expressed as the sum of phosphite and phosphate form of the substance and the hydrolysis product 4-t-amylphenol.

The migration of the hydrolysis product 2,4-di-t-amylphenol should not exceed 0,05 mg/kg.

(2)

in Table 1 for the following substance, the content of the columns (2), (5), (6) and (10) is replaced by the following:

FCM substance No | Ref. No | CAS No | Substance name |

Use as additive or polymer production aid

(yes/no)

Use as monomer or other starting substance or macro-molecule obtained from microbial fermentation

(yes/no)

FRF applicable

(yes/no)

SML

[mg/kg]

SML(T)

[mg/kg]

(Group restriction No)

Restrictions and specifications | Notes on verification of compliance

(1)

| (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) | (11)

438 | 13303 | 0002162-74-5 | bis(2,6-diisopropylphenyl) carbodiimide | no | yes | no | 0,05 | | Expressed as the sum of bis(2,6-diisopropylphenyl)carbodiimide and its hydrolysis product 2,6-diisopropylaniline |

(3)

in Table 1 for the following substance, the content of the column (3) is replaced by the following:

FCM substance No | Ref. No | CAS No | Substance name |

Use as additive or polymer production aid

(yes/no)

Use as monomer or other starting substance or macro-molecule obtained from microbial fermentation

(yes/no)

FRF applicable

(yes/no)

SML

[mg/kg]

SML(T)

[mg/kg]

(Group restriction No)

Restrictions and specifications | Notes on verification of compliance

(1)

| (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) | (11)

797 | 76807 | 0073018-26-5 | polyester of adipic acid with 1,3-butanediol, 1,2-propanediol and 2-ethyl-1-hexanol | yes | no | yes | |

(31)

(32)

(4)

in Table 1 for the following substances, the content of the column (8) is replaced by the following:

FCM substance No | Ref. No | CAS No | Substance name |

Use as additive or polymer production aid

(yes/no)

Use as monomer or other starting substance or macro-molecule obtained from microbial fermentation

(yes/no)

FRF applicable

(yes/no)

SML

[mg/kg]

SML(T)

[mg/kg]

(Group restriction No)

Restrictions and specifications | Notes on verification of compliance

(1)

| (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) | (11)

239 | 19975 | 0000108-78-1 | 2,4,6-triamino-1,3,5-triazine | yes | yes | no | 2,5 | | |

25420

93720

376 | 66905 | 0000872-50-4 | N-methylpyrrolidone | yes | no | no | 60 | | |

(5)

in Table 1 for the following substance, the content of the columns (8) and (10) is replaced by the following:

FCM substance No | Ref. No | CAS No | Substance name |

Use as additive or polymer production aid

(yes/no)

Use as monomer or other starting substance or macro-molecule obtained from microbial fermentation

(yes/no)

FRF applicable

(yes/no)

SML

[mg/kg]

SML(T)

[mg/kg]

(Group restriction No)

Restrictions and specifications | Notes on verification of compliance

(1)

| (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) | (11)

452 | 38885 | 0002725-22-6 | 2,4-bis(2,4-dimethylphenyl)-6-(2-hydroxy-4-n-octyloxyphenyl)-1,3,5-triazine | yes | no | no | 5 | | |

(6)

in Table 1 for the following substances, the content of the column (10) is replaced by the following:

FCM substance No | Ref. No | CAS No | Substance name |

Use as additive or polymer production aid

(yes/no)

Use as monomer or other starting substance or macro-molecule obtained from microbial fermentation

(yes/no)

FRF applicable

(yes/no)

SML

[mg/kg]

SML(T)

[mg/kg]

(Group restriction No)

Restrictions and specifications | Notes on verification of compliance

(1)

| (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) | (11)

794 | 18117 | 0000079-14-1 | glycolic acid | no | yes | no | | | Only to be used for manufacture of polyglycolic acid (PGA) for (i) indirect food contact behind polyesters such as polyethylene terephthalate (PET) or polylactic acid (PLA); and (ii) direct food contact of a blend of PGA up to 3 % w/w in PET or PLA. |

812 | 80350 | 0124578-12-7 | poly(12-hydroxystearic acid)-polyethyleneimine copolymer | yes | no | no | | |

Only to be used in plastics up to 0,1 % w/w.

Prepared by the reaction of poly(12-hydroxystearic acid) with polyethyleneimine.

(7)

in Table 1 for the following substance, the content of the columns (10) and (11) is replaced by the following:

FCM substance No | Ref. No | CAS No | Substance name |

Use as additive or polymer production aid

(yes/no)

Use as monomer or other starting substance or macro-molecule obtained from microbial fermentation

(yes/no)

FRF applicable

(yes/no)

SML

[mg/kg]

SML(T)

[mg/kg]

(Group restriction No)

Restrictions and specifications | Notes on verification of compliance

(1)

| (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) | (11)

862 | 15180 | 0018085-02-4 | 3,4-diacetoxy-1-butene | no | yes | no | 0,05 | |

SML including the hydrolysis product 3,4-dihydroxy-1-butene

Only to be used as a co-monomer for ethylvinylalcohol (EVOH) and polyvinylalcohol (PVOH) copolymers.

(17)

(19)

(8)

in Table 2 for the following group restriction, the content of the columns (2) and (4) is replaced by the following:

Group restriction No | FCM substance No |

SML (T)

[mg/kg]

Group restriction specification

(1)

| (2) | (3) | (4)

14 | 294 | 5 | Expressed as the sum of the substances and their oxidation products

368

894

(9)

in Table 3 the following notes on verification of compliance are inserted in numerical order:

Note No | Notes on verification of compliance

(1)

| (2)

(18)

| There is a risk that the SML could be exceeded from low-density polyethylene (LDPE)

(19)

| There is a risk that the OML could be exceeded in direct contact with aqueous foods from ethylvinylalcohol (EVOH) and polyvinylalcohol (PVOH) copolymers