ANNEX P LINE VOLTAGE, Decision_act (EU) 2002/735

No longer in force

The characteristics of the main traction voltage systems (with the exception of over-voltages) are described in detail in the following table:

Nominal voltages and their acceptable limits in value and in duration.

>TABLE>

–

The voltage of the collection bar in the substation including the line circuit breakers shall not exceed Umax1,

–

voltages, in normal operating conditions, have to stay in the range between Umin1 and Umax2,

–

when operating conditions are interrupted, voltages in the range Umin1 to Umin2 are acceptable.

Relationship Umax1/Umax2

Every occurrence of Umax2 must be followed by a level not exceeding Umax1 for an indefinite duration.

Lowest tension of service

When the operating conditions are interrupted, Umax2 will be the lower voltage limit for the air breakers when trainsets can run.

Note:

Values recommended for under-voltage tripping.

The under-voltage breakers with fixed or adjustable trips can be adjusted for values between 85 % and 95 % of Umin2.

  1. 12 Sep 2002 – 24 Jan 2013earlier wording
  2. 30 May 2002 – 12 Sep 2002earlier wording

Versions are held from 30 May 2002; the article may be older.