MODULE A (INTERNAL PRODUCTION CONTROL)
Conformity assessment of interoperability constituents
This module describes the procedure whereby the manufacturer or his authorised representative established within the Community, who discharges the obligations laid down in point 2, ensures and declares that the interoperability constituent concerned satisfies the requirements of the TSI that apply to it.
The manufacturer must prepare the technical documentation described in point 3.
The technical documentation must enable the conformity of the interoperability constituent with the requirements of this TSI to be assessed. It must, as far as relevant for such assessment, cover the design, manufacture and operation of the interoperability constituent. So far as relevant for the assessment, the documentation must contain:
a general description of the interoperability constituent,
conceptual design and manufacturing drawings and schemes of components, subassemblies, circuits, etc.,
descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the interoperability constituent,
a list of the technical specifications (relevant TSI and/or European specifications with relevant clauses, referred to in the TSI), applied in full or in part,
descriptions of the solutions adopted to meet the requirements of this TSI, where the European specifications referred to in the TSI have not been applied in full,
results of design calculations made, examinations carried out, etc.,
test reports.
The manufacturer must take all the measures necessary in order that the manufacturing process ensures compliance of the manufactured interoperability constituent with the technical documentation referred to in point 2 and with the requirements of the TSI that apply to it.
The manufacturer or his authorised representative established within the Community must draw up a written declaration of conformity. The content of this declaration has to include at least the information, indicated in Directive 96/48/EC, Annex IV(3) and in Article 13(3). The EC declaration of conformity and the accompanying documents must be dated and signed.
The declaration shall be written in the same language as the technical file and include the following:
the Directive reference (Directive 96/48/EC and other Directives to which the interoperability constituent may be subject),
the name and address of the manufacturer or his authorised representative established within the Community (give trade name and full address and in the case of authorised representative also give the trade name of the manufacturer or constructor),
description of interoperability constituent (make, type, etc.)
description of the procedure (module) followed in order to declare conformity,
all the relevant descriptions met by the interoperability constituent and in particular its conditions of use,
reference to this TSI and to any other applicable TSI, and where appropriate reference to European specifications,
identification of the signatory having received authority to engage the manufacturer or his authorised representative established within the Community.
The manufacturer or his authorised representative must keep a copy of the EC declaration of conformity with the technical documentation for a period of 10 years after the last interoperability constituent has been manufactured.
Where neither the manufacturer nor his authorised representative is established within the Community, the obligation to keep the technical documentation available is the responsibility of the person who places the interoperability constituent in the Community market.
If in addition to the EC declaration of conformity, an EC declaration for suitability for use for the interoperability constituent is required by the TSI, this declaration has to be added after being issued by the manufacturer under the conditions of module V.
MODULE B (TYPE-EXAMINATION)
Conformity assessment of interoperability constituents
This module describes that part of the procedure by which a notified body ascertains and attests that a type, representative of the production envisaged, meets the provisions of the TSI that apply to it.
The manufacturer, or his authorised representative established within the Community, must lodge the application for the type-examination with a notified body of his choice.
The application must include:
the name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address in addition,
a written declaration that the same application has not been lodged with any other notified body,
the technical documentation, as described in point 3.
The applicant must place at the disposal of the notified body a specimen, representative of the production envisaged and hereinafter called "type".
A type may cover several versions of the interoperability constituent provided that the differences between the versions do not affect the provisions of the TSI.
The notified body may request further specimens if needed for carrying out the test programme.
If no type tests are requested within the type-examination procedure (see point 4.4), and the type is sufficiently defined by the technical documentation, as described in point 3, the notified body may agree, that no specimens are placed at their disposal.
The technical documentation must enable the conformity of the interoperability constituent with the provisions of the TSI to be assessed. It must, as far as relevant for such assessment, cover the design, manufacture and operation of the product.
The technical documentation must contain:
a general type-description,
conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,
descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,
conditions of integration of the interoperability constituent in its system environment (subassembly, assembly, subsystem) and the necessary interface conditions,
conditions for use and maintenance of the interoperability constituent (restrictions of running time or distance, wear limits, etc.),
a list of the technical specifications, against which the conformity of the interoperability constituent is to be assessed (relevant TSI and/or European specifications with relevant clauses),
descriptions of the solutions adopted to meet the requirements of the TSI in cases where the European specifications referred to in the TSI have not been applied in full,
results of design calculations made, examinations carried out, etc.,
test reports.
The notified body must:
4.1. examine the technical documentation,
4.2. if a design review is requested in the TSI, perform an examination of the design methods, the design tools and the design results to evaluate their capability to fulfil the requirements for conformity for the interoperability constituent at the completion of the design process,
4.3. if a review of the manufacturing process is requested in the TSI, perform an examination of the manufacturing process devised for manufacturing the interoperability constituent, to evaluate its contribution to product conformity, and/or examine the review carried out by the manufacturer at the completion of the design process,
4.4. if type tests are requested in the TSI, verify that the specimen(s) has (have) been manufactured in conformity with the technical documentation, and carry out or have carried out the type tests in accordance with the provisions of the TSI and the European Specifications referred to in the TSI,
4.5. identify the elements which have been designed in accordance with the relevant provisions of the TSI and the European Specifications referred to in the TSI, as well as the elements which have been designed without applying the relevant provisions of those European Specifications,
4.6. perform or have performed the appropriate examinations and necessary tests in accordance with points 4.2, 4.3 and 4.4 to establish whether, where the appropriate European specifications referred to in the TSI have not been applied, the solutions adopted by the manufacturer meet the requirements of the TSI,
4.7. perform or have performed the appropriate examinations and necessary tests in accordance with points 4.2, 4.3 and 4.4 to establish whether, where the manufacturer has chosen to apply the relevant European specifications, these have actually been applied,
4.8. agree with the applicant the location where the examinations and necessary tests will be carried out.
Where the type meets the provisions of the TSI, the notified body must issue a typeexamination certificate to the applicant. The certificate must contain the name and address of the manufacturer, conclusions of the examination, conditions for its validity and the necessary data for identification of the approved type.
The time period of validity shall be no longer than three years.
A list of the relevant parts of the technical documentation must be annexed to the certificate and a copy kept by the notified body.
If the manufacturer or his authorised representative established within the Community is denied an EC type-examination certificate, the notified body must provide detailed reasons for such denial.
Provision must be made for an appeals procedure.
The applicant must inform the notified body that holds the technical documentation concerning the EC type-examination certificate of all modifications to the approved product which must receive additional approval where such changes may affect the conformity with the requirements of the TSI or the prescribed conditions for use of the product. This additional approval is given in the form of an addition to the original typeexamination certificate, or a new certificate will be issued after withdrawal of the old certificate.
If no modifications as under point 6 have been made, the validity of an expiring certificate can be extended for another period of validity. The applicant will apply for such a prolongation by a written confirmation that no such modifications have been made, and the notified body issues a prolongation for another period of validity as in point 5, if no contrary information exists. This procedure can be reiterated.
Each notified body must communicate to the other notified bodies the relevant information concerning the type-examination certificates it has withdrawn or refused.
The other notified bodies will receive copies of the type-examination certificates issued and/or their additions on request. The annexes to the certificates must be kept at the disposal of the other notified bodies.
The manufacturer or his authorised representative established within the Community must keep with the technical documentation copies of the EC type-examination certificates and their additions for a period of 10 years after the last product has been manufactured. Where neither the manufacturer nor his authorised representative is established within the Community, the obligation to keep the technical documentation available is the responsibility of the person who places the product on the Community market.
MODULE D (PRODUCTION QUALITY ASSURANCE)
Conformity assessment of interoperability constituents
This module describes the procedure whereby the manufacturer or his authorised representative established within the Community who satisfies the obligations of point 2 ensures and declares that the interoperability constituent concerned is in conformity with the type as described in the EC type-examination certificate and satisfies the requirements of the Directive 96/48/EC and of the TSI that apply to it.
The manufacturer must operate an approved quality system for production, final product inspection and testing as specified in point 3 and is subject to monitoring as specified in point 4.
Quality system
3.1. 3.1.The manufacturer must lodge an application for assessment of his quality system with a notified body of his choice, for the interoperability constituents concerned.
The application must include:
all relevant information for the product category representative for the interoperability constituents envisaged,
the documentation concerning the quality system,
the technical documentation of the approved type and a copy of the type-examination certificate.
3.2. The quality system must ensure compliance of the interoperability constituents with the type as described in the EC type-examination certificate and with the requirements of the Directive 96/48/EC and of the TSI that apply to them. All the elements, requirements and provisions adopted by the manufacturer shall be documented in a systematic and orderly manner in the form of written policies, procedures and instructions. The quality system documentation must permit a consistent interpretation of the quality programmes, plan, manuals and records.
It must contain in particular an adequate description of:
the quality objectives and the organisational structure,
responsibilities and powers of the management with regard to product quality,
the manufacturing, quality control and quality assurance techniques, processes and systematic actions that will be used,
the examinations and tests that will be carried out before, during and after manufacture, and the frequency with which they will be carried out,
the quality records, such as inspection reports and test data, calibration data, qualification reports of the personnel concerned, etc.,
the means to monitor the achievement of the required product quality and the effective operation of the quality system.
3.3. The notified body must assess the quality system to determine whether it satisfies the requirements referred to in point 3.2. It presumes conformity with these requirements in respect of quality systems that implement the relevant harmonised standard. This harmonised standard shall be EN ISO 9001 - December 2000, completed if necessary to take into consideration the specificity of the interoperability constituent for which it is implemented.
The audit must be specific for the product category, which is representative for the interoperability constituent. The auditing team must have at least one member experienced as an assessor in the product technology concerned. The evaluation procedure must include an inspection visit to the manufacturer's premises.
The decision must be notified to the manufacturer. The notification must contain the conclusions of the examination and the reasoned assessment decision.
3.4. The manufacturer must undertake to fulfil the obligations arising out of the quality system as approved and to uphold it so that it remains adequate and efficient.
The manufacturer, or his authorised representative established within the Community, shall keep the notified body that has approved the quality system informed of any intended updating of the quality system.
The notified body must evaluate the modifications proposed and decide whether the amended quality system will still satisfy the requirements referred to in point 3.2 or whether a reassessment is required.
It must notify its decision to the manufacturer. The notification must contain the conclusions of the examination and the reasoned assessment decision.
3.5. Each notified body must communicate to the other notified bodies the relevant information concerning the quality system approvals that it has withdrawn or refused.
3.6. The other notified bodies will receive copies of the quality system approvals issued on request.
Surveillance of the quality system under the responsibility of the notified body
4.1. The purpose of surveillance is to make sure that the manufacturer duly fulfils the obligations arising out of the approved quality system.
4.2. The manufacturer must allow the notified body entrance for inspection purposes to the locations of manufacture, inspection and testing, and storage and must provide it with all necessary information, in particular:
the quality system documentation,
the quality records, such as inspection reports and test data, calibration data, qualification reports of the personnel concerned, etc.
4.3. The notified body must periodically carry out audits to make sure that the manufacturer maintains and applies the quality system and must provide an audit report to the manufacturer.
The frequency of the audits shall be at least once a year.
4.4. Additionally the notified body may pay unexpected visits to the manufacturer. During such visits the notified body may carry out, or cause to be carried out, tests to verify that the quality system is functioning correctly, if necessary. The notified body must provide the manufacturer with a visit report and, if a test has taken place, with a test report.
The manufacturer must, for a period of 10 years after the last product has been manufactured, keep at the disposal of the national authorities:
the documentation referred to in the second indent of point 3.1,
the updating referred to in the second paragraph of point 3.4,
the decisions and reports from the notified body which are referred to in the final paragraph of point 3.4, points 4.3 and 4.4.
The manufacturer or his authorised representative established within the Community must draw up the EC declaration of conformity of the interoperability constituent.
The content of this declaration has to include at least the information, indicated in Directive 96/48/EC, Annex IV(3) and Article 13(3). The EC declaration of conformity and the accompanying documents must be dated and signed.
The declaration must be written in the same language of the technical file and must contain the following:
the Directive references (Directive 96/48/EC and other Directives, to which the interoperability constituent may be subject),
the name and address of the manufacturer or his authorised representative established within the Community (give trade name and full address and in the case of authorised representative also give the trade name of the manufacturer or constructor),
description of interoperability constituent (make, type, etc.),
description of the procedure (module) followed in order to declare conformity,
all of the relevant descriptions met by the interoperability constituent and in particular its conditions of use,
name and address of notified body (bodies) involved in the procedure followed in respect of conformity and date of examination certificates together with the duration and conditions of validity of the certificate,
reference to this TSI and any other applicable TSI and where appropriate reference to European specifications,
identification of signatory having received power to engage the manufacturer or his authorised representative established within the Community.
The certificates to be referred to are:
the quality system approval and surveillance reports indicated in points 3 and 4,
the type-examination certificate and its additions,
The manufacturer or his authorised representative established within the Community must keep a copy of the EC declaration of conformity for a period of 10 years after the last interoperability constituent has been manufactured.
Where neither the manufacturer nor his authorised representative is established within the Community, the obligation to keep the technical documentation available is the responsibility of the person who places the interoperability constituent on the Community market.
If additional to the EC declaration of conformity an EC declaration of suitability for use for the interoperability constituent is requested in the TSI, this declaration has to be added, after being issued by the manufacturer under the conditions of Module V.
MODULE F (PRODUCT VERIFICATION)
Conformity assessment of interoperability constituents
This module describes that part of the procedure whereby a manufacturer or his authorised representative established within the Community checks and attests that the interoperability constituent concerned, subject to the provisions of point 3 is in conformity with the type as described in the EC type-examination certificate and satisfies the requirements of Directive 96/48/EC and of the TSI that apply to it.
The manufacturer must take all measures necessary in order that the manufacturing process ensures conformity of the interoperability constituents with the type as described in the EC type-examination certificate and with the requirements of Directive 96/48/EC and of the TSI that apply to them.
The notified body must carry out the appropriate examinations and tests in order to check the conformity of the interoperability constituent with the type as described in the EC type-examination certificate and with the requirements of Directive 96/48/EC and of the TSI either by examination and testing of every interoperability constituent as specified in point 4 or by examination and testing of interoperability constituents on a statistical basis, as specified in point 5, at the choice of the manufacturer.
Verification by examination and testing of every interoperability constituent
4.1. All products must be individually examined and appropriate tests as set out in the relevant European specifications referred to in Article 10 or equivalent tests shall be carried out in order to verify their conformity with the type as described in the EC type-examination certificate and the requirements of Directive 96/48/EC and of the TSI that apply to them.
4.2. The notified body must draw up a written certificate of conformity for the approved products relating to the tests carried out.
4.3. The manufacturer or his authorised representative must ensure that he is able to supply the notified body's certificates of conformity on request.
Statistical verification
5.1. The manufacturer must present his interoperability constituents in the form of homogeneous lots and shall take all measures necessary in order that the manufacturing process ensures the homogeneity of each lot produced.
5.2. All interoperability constituents must be available for verification in the form of homogeneous lots. A random sample shall be drawn from each lot. Interoperability constituents in a sample shall be individually examined and appropriate tests as set out in the relevant European specifications referred to in Article 10, or equivalent tests, shall be carried out to ensure their conformity with the requirements of Directive 96/48/EC and of the TSI which apply to them and to determine whether the lot is accepted or rejected.
5.3. The statistical procedure must use appropriate elements (statistical method, sampling plan, etc.), depending on the characteristics to be assessed, as specified in the TSI which apply to them.