Member States should notify to the Commission the appropriate authorities referred to in Article 36 of the Euratom Treaty.
The following requirements should be met:
Monitoring networks
Each Member State should define representative geographical regions for its own territory.
Each Member State should define for each type of medium a sparse monitoring network and a dense monitoring network.
The sites comprising a network should be representative of the regional situation taking into account, where appropriate, the population distribution within the region.
Sampling media, types of measurements, and periodicity
The sampling media and types of measurements are listed in Annex I. Except where otherwise specified in this Recommendation, measurements should preferably be carried out for the sparse network on a monthly basis and for the dense network quarterly.
For the sparse monitoring network, the detection limits and sensitivities of the measurement instruments should allow the actual levels to be quantified.
For the dense monitoring network, the detection limits of the measurement devices should be lower than the reporting levels defined in Annex III.
The Member States should inform the Commission of the detection limits and of the uncertainties taken into account.
The Member States should retain measurement techniques that have proven reliable and ensure quality control of the results.
Member State laboratories supplying data under the terms of this Recommendation should periodically participate in intercomparison exercises, in particular those organised by the Commission, so as to ensure the intercomparability of the data reported.
Sampling strategies and measurements in relation to each of the required sampling media
Airborne particulates
Measurements of gamma emitting radionuclides should be performed on a routine basis to detect and measure man-made radioisotopes as well as naturally occurring radionuclides. Beryllium-7 should be reported as a qualitative check of the methods used. Where gross beta activity(4) measurements are recorded these should also be reported.
Sampling locations should be in the vicinity of densely populated areas; adequate geographical coverage should be ensured by the choice of at least one sampling location per geographical region.
Sampling should be performed by systems operating continuously.