3 ANNEXIII, Decision_act (EU) 1999/91

No longer in forcecited 1×

Note: for products having more than one of the intended uses specified in the following families, the tasks for the approved body, derived from the relevant systems of attestation of conformity, are cumulative.

PRODUCT FAMILY THERMAL INSULATING PRODUCTS (1/2) 1. Systems of attestation of conformity For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):

Product(s) Intended use(s) Level(s) or class(es) Attestation of conformity system(s) Thermal insulating products (factory-made products and products intended to be formed in-situ) any — 3 System 3: See Directive 89/106/EEC, Annex III(2)(ii), Second possibility.

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3. of the Interpretative Documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

1999D0091 — EN — 26.01.1999 — 000.001 — 6 PRODUCT FAMILY THERMAL INSULATING PRODUCTS (2/2) 1. Systems of attestation of conformity For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):

Product(s) Intended use(s) Level(s) or classe(es) (reaction to fire) Attestation of conformity system(s) Thermal insulating products (factory-made products and products intended to be formed in-situ) for uses subject to regulations on reaction to fireA(1), B (1), C(1 )

—— A(2 ), B (2), C(2 )

—— A(3 ), D, E, F 4 System 1: See Directive 89/106/EEC, Annex III(2)(i), without audit-testing of samples.

System 3: See Directive 89/106/EEC, Annex III(2)(ii), Second possibility.

System 4: See Directive 89/106/EEC, Annex III(2)(ii), Third possibility.

(1 ) Materials for which the reaction to fire performance is susceptible to change during production (in general, those subject to chemical modification, e.g. fire retardants, or where changes of composition may lead to changes in reaction to fire performance).

(2 ) Materials for which the reaction to fire performance is not susceptible to change during the production process.

(3 ) Materials of class A that according to the Decision 96/603/EC do not require to be tested for reaction to fire.

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3. of the Interpretative Documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

1999D0091 — EN — 26.01.1999 — 000.001 — 7