Description
The document will be produced either as a sticker, if possible in ID 2 format, or as a stand-alone document.
The title of the document (Residence permit) shall appear in this space in the language(s) of the issuing Member State.
The document number - with special security features and preceded by an identification letter - shall appear in this space.
The section to be completed has nine sub-sections:
first sub-section
Name: this sub-section shall contain surname and forename(s) in that order.
second sub-section
Valid until: this sub-section shall indicate the relevant expiry date, or, where appropriate, a word to indicate unlimited validity.
third sub-section
Place/date of issue: this sub-section shall indicate the place and date of issue of the residence permit.
fourth sub-section
Type of permit: this sub-section shall indicate the specific type of residence permit issued to the third country national by the Member State.
fifth to ninth sub-section
Remarks: in the fifth to ninth sub-sections Member States may enter details and indications for national use necessary with regard to their rules on third country nationals including indications relating to any permission to work.
Date/Signature/Authorization: here - if necessary - the signature and seal of the issuing authority and/or the holder may appear.
In this space the printed area shall contain the national emblem of the Member State to distinguish the residence permit and provide a safeguard of its national origin.
This box shall be reserved for the machine-readable area. The machine-readable area shall conform to ICAO guidelines.
The printed text of this box shall contain a character indicating exclusively the respective Member State. This character may not affect the technical features of the machine-readable zone.
This space shall contain a metallized latent image effect including the country code of the Member State.
This space shall contain an OVD (kinegram or equivalent sign).
If the residence permit is produced as a stand-alone document, an identity photograph shall be affixed in this space and secured with OVD film (kinefilm or equivalent security laminate).
The following additional information boxes shall be provided on the back in the case of a stand-alone document:
date/place of birth,
nationality,
sex,
remarks.
The address of the permit holder may also be indicated.
Uniform format for residence permits (98/C 193/01)
The pictures displayed below are the result of the Council Decision of 18 December 1997 on the technical specifications referred to in Article 2(1) of the Joint Action of 16 December 1996, adopted by the Council on the basis of Article K.3 of the Treaty on European Union, on a uniform format for residence permits (97/11/JHA) (1).
At this juncture only specimens are published as examples: Austria's specimen for the adhesive stick-in version (picture No 1) and specimens from the Kingdom of the Netherlands for the card format version ID1 (picture No 2) and ID2 (picture No 3).
Specimens from the other Member States will be published at a later stage after expiry of the time limit provided for in Article 1 of the Joint Action of 15 December 1996 adopted by the Council on the basis of Article K.3 of the Treaty on European Union, on a uniform format for residence permits (97/11/JHA).
PICTURE No 1
>REFERENCE TO A FILM>
PICTURE No 2
>REFERENCE TO A FILM>
PICTURE No 3
>REFERENCE TO A FILM>
OJ L 7, 10.1.1997, p. 1.