ANNEX V, Directive (EU) 1970/157

No longer in force

CHECKS ON CONFORMITY OF PRODUCTION I. VEHICLES 1. General These requirements are consistent with the test to be held to check conformity of production, pursuant to sections 7.3.5 and 7.4.3 of Annex I.

2.

Testing procedures The methods of testing, measuring instruments and interpretation of results shall be those described in Annex I. The vehicle(s) under test shall be subjected to the test for measurement of noise of vehicle in motion as described in section 5.2.2.4 of Annex I.

3.

Sampling One vehicle has to be chosen. If after the test in 4.1 below the vehicle is not considered to conform to the requirements of this Directive, two more vehicles have to be tested.

4.

Evaluation of the results 4.1. If the sound level of the vehicle tested pursuant to sections 1 and 2 does not exceed by more than 1 dB (A) the limit values prescribed in item 5.2.2.1 of Annex I, the vehicle type shall be considered to conformto the requirements of this Directive.

4.2. If the vehicle tested according to 4.1 does not satisfy the requirements laid down in that section, two more vehicles of the same type must be tested pursuant to sections 1 and 2.

4.3. If the sound level of the second and/or third vehicle of 4.2 exceeds by more than 1 dB (A) the limit values prescribed in section 5.2.2.1 of Annex I, the vehicle type is considered not to conformto the requirements of this Directive and the manufacturer must take the necessary measures to restore the conformity.

II.

REPLACEMENT EXHAUST SYSTEMS 1. General These requirements are consistent with the test to be held to check conformity of production, pursuant to sections 6.3.5 and 6.4.3 of Annex II.

2.

Testing procedures The methods of testing, measuring instruments and interpretation of results are those described in Annex II. The exhaust systemor component under test must be subjected to the test as described in Annex II, section 5.

3.

Sampling An exhaust systemor component has to be chosen. If, after the test in 4.1, the sample is not considered to conform to the requirements of this Directive, two more samples have to be tested.

4.

Evaluation of the results 4.1. If the sound level of the exhaust systemor component, tested pursuant to sections 1 and 2, measured in accordance with section 5.2 of Annex II, does not exceed by more than 1 dB (A) the level measured during the EEC type-approval tests of this type of exhaust systemor component, the exhaust systemor component type is considered to conformto the requirements of this Directive.

4.2. If the exhaust systemor component tested according to 4.1 does not satisfy the requirements laid down in that section, two more exhaust systems or components of the same type must be tested pursuant to sections 1 and 2 above.

4.3. If the sound level of the second and/or third sample of 4.2 exceeds by more than 1 dB (A) the level measured during the EEC type-approval tests of

this type of exhaust systemor component, the exhaust systemor component type is considered not to conformto the requirements of this Directive and the manufacturer must take the necessary measures to restore the conformity.

Changed on 1 Jan 1995

4. Evaluation of the results 4.1. If the sound level of the vehicle tested pursuant to sections 1 and 2 does not exceed by more than 1 dB (A) the limit values prescribed in item 5.2.2.1 of Annex I, the vehicle type shall be considered to conform to conformto the requirements of this Directive.

4.3. If the sound level of the second and/or third vehicle of 4.2 exceeds by more than 1 dB (A) the limit values prescribed in section 5.2.2.1 of Annex I, the vehicle type is considered not to conform to conformto the requirements of this Directive and the manufacturer must take the necessary measures to restore the conformity.

2. Testing procedures The methods of testing, measuring instruments and interpretation of results are those described in Annex II. The exhaust system or systemor component under test must be subjected to the test as described in Annex II, section 5. 3. Sampling An exhaust system or systemor component has to be chosen. If, after the test in 4.1, the sample is not considered to conform to the requirements of this Directive, two more samples have to be tested. 4. Evaluation of the results 4.1. If the sound level of the exhaust system or systemor component, tested pursuant to sections 1 and 2, measured in accordance withsection with section 5.2 of Annex II, does not exceed by more than 1 dB (A) the level measured during the EEC type-approval tests of this type of exhaust system or systemor component, the exhaust system or systemor component type is considered to conform to conformto the requirements of this Directive. 4.2. If the exhaust system or systemor component tested according to 4.1 does not satisfy the requirements laid down in that section, two more exhaust systems or components of the same type must be tested pursuant to sections 1 and 2 above.

this type of exhaust system or systemor component, the exhaust system or systemor component type is considered not to conform to conformto the requirements of this Directive and the manufacturer must take the necessary measures to restore the conformity.

  1. 1 Jan 1995 – 3 May 1996earlier wording
  2. 16 Nov 1992 – 1 Jan 1995earlier wording