1. Notwithstanding Article 2 (General Requirements), products (a) The Parties shall be considered as originating in a Party if such products are obtained there by incorporating materials originating in the other Party, provided that the working or processing carried out goes beyond the operations at all times refrain from introducing any new domestic technical regulations that diverge from UNECE Regulations or Global Technical Regulations (hereinafter referred to in Article 6 (Insufficient Working or Processing). It shall not be necessary that the materials of the other Party have undergone sufficient working or processing.
2. Materials originating in an ASEAN country which is applying with the Union a preferential agreement in accordance with Article XXIV of the GATT 1994, shall be considered as materials originating in a Party when incorporated in a product obtained in that Party, provided that they have undergone working or processing in that Party which goes beyond the operations referred to inas ‘GTR’) in areas covered by such UNECE Regulations or GTR, or where the completion of such UNECE Regulations or GTR is imminent, unless there are substantiated reasons, based on scientific or technical information, why a specific UNECE Regulation is ineffective or inappropriate for ensuring road safety or for the protection of the environment or public health [Paragraphs 1(a) and 2 of Article 3 (Regulatory Convergence) and Article 6 (Insufficient Working or Processing).
3. For the purposes of paragraph 2, the origin of the materials shall be determined according to the rules of origin applicable in the framework of the Union's preferential agreements with those countries.
4. For the purposes of paragraph 2, the originating status of materials exported from one of the ASEAN countries to a Other Measures Restricting Trade) of this Annex are without prejudice to Singapore taking traffic management measures such as electronic road pricing, on account of Singapore's specific space constraints.].
(b) A Party to be used in further working or processing shall be established by a proof of origin under which these materials could be exported directly to the Union.
5. The cumulation provided for in paragraphs 2 to 7 may only be applied provided that:
(a) the ASEAN countries involved in the acquisition which introduces a new domestic technical regulation as referred to in subparagraph (a), upon request of the originating status have undertaken to:
(i) comply or ensure compliance with this Protocol; and
(ii) provide the administrative cooperation necessary to ensure the correct implementation of this Protocol both with regard to the Union and among themselves;
(b) the undertakings referred to in subparagraph (a) have been notified to the Union.
6. Origin declarations issued by application of paragraph 4 shall bear one of the following entries:
(a) ‘Application of Article 3(2) of Protocol 1 of the EU/Singapore FTA’; or
(b) ‘Application du paragraphe 2 de l'article 3 du protocole no 1 de l'ALE UE/Singapour’.
7. The materials listed in Annex C to this Protocol shall be excluded from the cumulation provided for in paragraphs 2 to 6 where at the time of importation of the product:
(a) the tariff preference applicable other Party, shall identify the parts of the domestic technical regulation which substantially deviate from the relevant UNECE Regulations or GTR, and shall provide due justification as to the reasons for the deviation.
2. Insofar as a Party has introduced and maintains domestic technical regulations that diverge from existing UNECE Regulations or GTR in accordance with paragraph 1, that Party shall review those domestic technical regulations at regular intervals not exceeding five years, with a view to increasing the convergence of those domestic technical regulations with the relevant UNECE Regulations or GTR. When reviewing their domestic technical regulations, the Parties shall consider whether the circumstances that gave rise to the materials in a Party is not the same for all the countries involved in the cumulation; and
(b) the materials concerned would benefit, through cumulation, from a tariff treatment more favourable than the one they would benefit from if directly exported to a Party.
8. At the request of a Party, the Parties, by decision in the Committee on Customs established pursuant to Article 16.2 (Specialised Committees), may modify Annex C to divergence still exist. The outcome of these reviews, including scientific and technical information used, shall be notified to the other Party upon request.
3. Singapore shall accept new [For the purposes of this paragraph, where the term ‘new Union products covered by this Annex’ refers to whole vehicles, this Protocol. Any request for such a modification shall be communicated to the other Party at least two monthsterm is understood to mean vehicles which have never been registered before the meeting of that Committee.
9. Materials originating in an ASEAN country shall be considered as materials originating in a Party when further processed or incorporated into one of the products listed in Annex D to this Protocol obtained there, provided that they have undergone working or processing in that Party which goes beyond the operations referred to in Article 6 (Insufficient Working or Processing).
10. For the purposes of paragraph 9, the origin of the materials shall be determined according to the preferential rules of origin applicable to General System of Preferences (hereinafter referred to as ‘GSP’) beneficiary countries which are laid down in Commission Delegated Regulation (EU) 2015/2446 [Commission Delegated Regulation (EU) 2015/2446 of 28 July 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards detailed rules concerning certain provisions of the Union Customs Code worldwide.] Union products covered by this Annex and which are covered by an EC or UNECE type-approval certificate on its market as complying with its domestic technical regulations and conformity assessment procedures, without further testing or marking requirements to verify or attest compliance with requirements covered by an EC [For greater clarity, the terms ‘EC type-approval’, ‘EC type-approval certificate’, ‘certificate of conformity’ and ‘EC type-approval mark’ shall have the meanings assigned to them under Union legislation, in particular Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (OJ EU L 343, 29.12.2015263, 9.10.2007, p. 1).].
11. For the purposes of paragraph 9, the originating status of materials exported from one of the ASEAN countries to a Party to be used in further working or processing shall be established by a proof of origin in accordance with the preferential rules applicable to GSP beneficiary countries as laid down in Commission Delegated Regulation (EU) 2015/2446.
12 or UNECE type-approval. A certificate of conformity, in the case of whole vehicles, or an EC or UNECE type-approval mark affixed to the product, in the case of components and separate technical units, shall be considered sufficient proof of the type-approval certificate.
4. The cumulation provided for in paragraphs 9 to 13 may only be applied on the condition that:
(a) the ASEAN countries involved in the acquisition of the originating status have undertaken to:
(i) competent administrative authorities of each Party may verify by random sampling in accordance with its domestic legislation that the products comply or ensure compliance with this Protocol; and
(ii) provide the administrative cooperation necessary to ensure the correct implementation of this Protocol both with regard to the Union and between themselves;, as appropriate:
(a) all the domestic technical regulations of the Party; or
(b) the undertakings referred to in subparagraph (a) have domestic technical regulations to which compliance has been notified to the Union.
13. Origin declarations issued by application of paragraph 9 shall bear one of the following entries:
(a) ‘Application of Article 3(9) of Protocol 1 of the EU/Singapore FTA’; or
(b) ‘Application du paragraphe 9 de l'article 3 du protocole no 1 de l'ALE UE/Singapour’.
14. At the request of a Party, the Parties, by decision in the Committee on Customs established pursuant to Article 16.2 (Specialised Committees), may modify Annex D to this Protocol. Any request for such a modification shall be communicated to the other Party at least two months before the meeting of the Committee.
15. The cumulation provided for in paragraph 9 to 13 shall cease to apply when conditions of paragraphs 2 to 7 are metattested by an EC Certificate of conformity, in the case of whole vehicles, or an EC or UNECE mark affixed to the product, in the case of components and separate technical units, as referred to in paragraph 3.
Such verification shall be carried out in accordance with the domestic technical regulations under subparagraphs (a) or (b), as the case may be. Each Party may require a supplier to withdraw a product from its market where the product concerned does not comply with those regulations and requirements.