6.1. Where, for a given product 5.1. The term ‘natural fibres’ is used in the list, reference is made to this Note, the conditions set out in column (3) shall not be applied to any basic textile materials used in the manufacture of that product and which, taken together, represent 15 % or less of the total weight of all the basic textile materials used (See also Notes 6.3 and 6.4).
6.2. However, the tolerance mentioned in Note 6.1 may be applied only to mixed products which have been made from two or more basic textile materials.
The following are the basic textile materials:
silk;
wool;
to refer to fibres other than artificial or synthetic fibres. It is restricted to the stages before spinning takes place, including waste, and, unless otherwise specified, includes fibres which have been carded, combed or otherwise processed, but not spun.
5.2. The term ‘natural fibres’ includes horsehair of heading 0511, silk of headings 5002 and 5003, as well as wool-fibres and fine or coarse animal hair;
fine animal hair;
horsehair;
cotton;
paper-making materials and paper;
flax;
true hemp;
jute and other textile bast of headings 5101 to 5105, cotton fibres;
sisal and other textile fibres of the genus Agave;
coconut, abaca, ramie of headings 5201 to 5203, and other vegetable textile fibres;
synthetic man-made filament fibres of polypropylene;
synthetic man-made filament fibres of polyester;
synthetic man-made filament fibres of polyamide;
synthetic man-made filament fibres of polyacrylonitrile;
synthetic man-made filament fibres of polyimide;
synthetic man-made filament fibres of polytetrafluoroethylene;
synthetic man-made filament fibres of poly(phenylene sulphide);
synthetic man-made filament fibres of poly(vinyl chloride);
other synthetic man-made filament fibres;
of headings 5301 to 5305.
5.3. The terms ‘textile pulp’, ‘chemical materials’ and ‘paper-making materials’ are used in the list to describe the materials, not classified in Chapters 50 to 63, which can be used to manufacture artificial man-made filament fibres of viscose;
other artificial man-made filament fibres;
current-conducting filaments;
, synthetic man-made stapleor paper fibres of polypropylene;
synthetic man-made staple fibres of polyester;
synthetic or yarns.
5.4. The term ‘man-made staple fibres of polyamide;
synthetic man-made staple fibres of polyacrylonitrile;
synthetic man-made staple fibres of polyimide;
’ is used in the list to refer to synthetic man-made staple fibres of polytetrafluoroethylene;
synthetic man-made or artificial filament tow, staple fibres of poly(phenylene sulphide);
synthetic man-made staple fibres of poly(vinyl chloride);
other synthetic man-made staple fibres;
artificial man-made staple fibres of viscose;
other artificial man-made staple fibres;
yarn made of polyurethane segmented or waste, of headings 5501 to 5507.
5.5. Printing (when combined with flexible segments of polyether, whether or not gimped;
products of heading 5605 (metallised yarn) incorporating strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of a transparent or coloured adhesive between two layers of plastic film;
other products of heading 5605;
glass fibres;
metal fibres;
mineral fibres.
6.3. In the case of products incorporating ‘yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped’, this tolerance is 20 % in respect of this yarn.
6.4. In the case of products incorporating ‘strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of a transparent or coloured adhesive between two layers of plastic film’, this tolerance is 30 % in respect of this stripWeaving, Knitting/Crocheting, Tufting or Flocking) is defined as a technique by which an objectively assessed function, like colour, design, technical performance, is given to a textile substrate with a permanent character, using screen, roller, digital or transfer techniques.
5.6. Printing (as standalone operation) is defined as a technique by which an objectively assessed function, like colour, design, technical performance, is given to a textile substrate with a permanent character, using screen, roller, digital or transfer techniques combined with at least two preparatory/finishing operations (such as scouring, bleaching, mercerizing, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product.