1.1. To be approved in accordance with EASA Part-145, pursuant to the terms of this Annex, the repair station shall comply with all of the following Special Conditions.
1.1.1. The repair station shall submit an application in a form and a manner acceptable to EASA.
The application for both initial and continuation of the EASA approval shall include a statement demonstrating that the EASA certificate and/or rating is necessary for maintaining or altering aeronautical products registered or designed in an EU Member State or parts fitted thereon.
The repair station shall provide a supplement to its Repair Station Manual (RSM) that is verified and accepted by the FAA on behalf of EASA. All revisions to the supplement must be accepted by the FAA. The supplement shall include the following:
the supplement must contain a statement by the accountable manager of the repair station, as defined in the current version of EASA Part 145 which commits the repair station to compliance with this Annex and the special conditions as listed;
detailed procedures for the operation of an independent quality monitoring system including oversight of all multiple facilities and line stations within the territory of the United States;
procedures for the release or approval for return to service that meet the requirements of EASA Part-145 for aircraft and the use of the FAA Form 8130 3 for aircraft components, and any other information required by the owner or operator as appropriate;
for airframe/aircraft rated facilities, procedures to ensure that the certificate of airworthiness and the Airworthiness Review Certificate are valid prior to the issue of a release to service document;
procedures to ensure that repairs and modifications as defined by EASA requirements are accomplished in accordance with data approved by EASA;
a procedure for the repair station to ensure that the FAA-approved initial and recurrent training programme and any revision thereto include human factors training;
procedures for reporting un-airworthy conditions as required by EASA Part-145 on civil aeronautical products to the EASA, aircraft design organisation, and the customer or operator;
procedures to ensure completeness of, and compliance with, the customer or operator work order or contract including notified EASA airworthiness directives and other notified mandatory instructions;
procedures in place to ensure that contractors meet the terms of these implementation procedures; that is, using an EASA-approved Part-145 organisation or, if using an organisation which does not hold an EASA Part-145 approval, the repair station returning the product to service is responsible for ensuring its airworthiness;
procedures to permit work away from the fixed location on a recurring basis, when applicable;
procedures to ensure appropriate covered hangars are available for base maintenance of aircraft.
1.2. To continue to be approved in accordance with EASA Part-145, pursuant to the terms of this Annex, the repair station shall comply with the following. The FAA shall verify that the repair station:
allow EASA, or the FAA on behalf of EASA, to inspect it for continued compliance with the requirements of the 14 CFR part 145 and these Special Conditions (i.e. EASA Part-145);
accept that investigation and enforcement action may be taken by EASA in accordance with any relevant EC regulations and EASA procedures;
cooperate with any EASA investigation or enforcement action;
continue to comply with 14 CFR part 43 and part 145, and these Special Conditions.