, Agreement between the United States of America and the European Community on cooperation…

In forcesince 19 Nov 2020

2.1. The special conditions referred to in paragraph 4.2.1, as detailed in the TIP-S, are the following:

(a)

The FSTD operator shall:

(i)

provide to the Aviation Authority or EASA, as applicable, evidence that FAA FSTD directives have been incorporated into the MQTG, and

(ii)

identify any changes to the published FAA FFS configuration list.

(b)

The instructor operating station manual shall include operating instructions with U.S. standards.

(c)

Instructor operating station settings and indications shall conform to the U.S. units of measurement.

(d)

At least one declared qualification U.S. airport/airfield model featuring proper modelling and navigation/communication facilities shall be evaluated.

(e)

Category I, II, or III (as applicable) instrument approaches shall be demonstrated at a U.S. airport and with corresponding settings selectable from the instructor operating station.

(f)

The FFS shall reflect the U.S. configuration of the simulated airplane.

(g)

All configurations listed in the FAA FFS qualification certificate shall be evaluated during each evaluation.

(h)

A circling approach to a U.S. airport at the maximum demonstrated landing weight shall be conducted.

(i)

FFS-specific objective, functional, and subjective tests as per applicable U.S. requirements that are not covered by the applicable European FFS standard level of qualification shall be performed.