Art. 7 Free trade Agreement between the European Union and its Member States, of the one part,…

Execution of requests

In forcesince 1 Aug 2018
1.

In order to comply with a request for assistance, the requested authority shall proceed, within the limits of its competence and available resources, as though it were acting on its own account or at the request of other authorities of that same Party, by supplying information already possessed, by carrying out appropriate enquiries or by arranging for them to be carried out. This provision shall also apply to any other authority to which the request has been addressed by the requested authority when the latter cannot act on its own.

2.

Requests for assistance shall be executed in accordance with the legal or regulatory provisions of the requested Party.

3.

Duly authorised officials of a Party may, with the agreement of the other Party involved and subject to the conditions laid down by the latter, be present to obtain in the offices of the requested authority or any other concerned authority in accordance with paragraph 1, information relating to activities that are or may be operations in breach of customs legislation which the applicant authority needs for the purposes of this Protocol.

4.

Duly authorised officials of a Party involved may, with the agreement of the other Party involved and subject to the conditions laid down by the latter, be present at enquiries carried out in the latter’s territory.

Changed on 1 Aug 2018

Implementation and cooperation 1. The Parties shall closely cooperate to promote common understanding on regulatory issues, including those related to radio frequency equipment, and consider any request of the other Party regarding the implementation of this Annex. 2. The Parties shall cooperate to maintain and expand the voluntary arrangements for mutual acceptance of test reports between them. 3. Whenever Korea requires as a positive assurance of conformity the procedures set out in Article 3(b)(iii) and Article 4.2(b) of this Annex for a product falling within the scope of this Annex, it shall ensure that its certification bodies have Memoranda of Understanding (MOUs) with testing laboratories in the European Union, or are National Certification Bodies under the IECEE CB Scheme, for that product unless its technical regulations for that product substantially differ from relevant IEC standards. This paragraph shall apply as from the expiry of the transitional period set out in Article 4.1 of this Annex. 4. When amending existing technical regulations or developing any new technical regulation for EMC or safety of covered products, a 1. In order to comply with a request for assistance, the requested authority shall proceed, within the limits of its competence and available resources, as though it were acting on its own account or at the request of other authorities of that same Party shall notify the other Party in advance, provide, upon request, additional available , by supplying information or written responses to the comments made by the other Party and, as already possessed, by carrying out appropriate, consider the other Party’s views. 5. The Parties agree to consult promptly on any issue that may arise concerning the implementation of this Annex, and to cooperate for the further facilitation of trade in covered products, including, as appropriate, through the promotion of international standards. 6. The Parties enquiries or by arranging for them to be carried out. This provision shall protect any confidential business information obtained under the procedures referred to in this Annex. [1] The Parties may agree in the future by decision of the Trade Committee on any new international standard-setting bodies also apply to any other authority to which they deem relevant for the purpose of implementing this Article. [2] In case no such international standards exist, or where a Party has adopted any standard, technical regulation or conformity assessment procedure which differs from that under international standards, the Party shall limit its standard, technical regulation or conformity assessment procedure to what is necessary for the achievement of legitimate objectives on safety and other public interest requirements and, wherever appropriate, base them on products requirements in terms of performance rather than design or descriptive characteristics, in accordance with Chapter Four (Technical Barriers to Trade). [3] Either Party reserves its right to require in the future positive assurance of conformity for any product currently not subject to positive assurance of conformity, in which case the Party has to comply with its obligations under this Annex. [4] The permission to place a product on the market in accordance with this subparagraph shall include permission to affix any mandatory marks that are required for placing such product on the market. [5] The specific testing laboratories that are competent in the notifying Party in accordance with its legislation, that obtain accreditation (for example under ISO/IEC 17025) by the accreditation body or that are competent for post-market surveillance for conformity assessment in the notifying Party, will be considered competent for the task envisaged in this Annex. [6] The permission to place a product on the market in the request has been addressed by the requested authority when the latter cannot act on its own. 2. Requests for assistance shall be executed in accordance with this Article shall include permission to affix any mandatory marks that are required for placing the product on the market. -------------------------------------------------- Appendix 2-B-1 1. Annex 2-B shall cover those products listed in Article 1.2 of Annex 2-B which: (a) in the case of the European Union’s obligations, fall, at the date of signature of this Agreement, within the scope of Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version), or Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, or of the the legal or regulatory provisions on safety or electromagnetic compatibility of Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity; and (b) in the case of Korea’s obligations, fall, at the date of signature of this Agreement, within the scope of the Radio Waves Act (Act No.8867, Feb. 29, 2008), the Framework Act on Telecommunications (Act No.8974, Mar. 21, 2008) or the Electrical Appliances Safety Control Act [1] (Act No.8852, Feb. 29, 2008). 2. The Parties understand that the products covered by the domestic laws listed in this Appendix, which include all the products to which Annex 2-B applies, are intended to cover the universe of electronics products. It is understood that in case a product is not covered by Annex 2-B for a of the requested Party. 3. Duly authorised officials of a Party but is covered for the other Party, or at the time of signature of this Agreement or subsequently [2] subject to mandatory third party certification by a Party but not by may, with the agreement of the other Party, the other Party can involved and subject such product to a similar treatment as may be necessary for the protection of health and safety. Before such measures are implemented, the Party wishing to introduce them shall notify the other Party of its intentions and provide for a period of three months for consultations. [1] Notwithstanding this subparagraph, Korea may, when necessary, subject electrical equipment operated with direct current to conformity assessment procedures under the Electrical Appliances Safety Control Act in accordance with this Article. [2] For instance, pursuant to Article 6 of Annex 2-B or in case specific instruments are introduced pursuant to Article 1 (4) of Directive 2004/108/EC on electromagnetic compatibility. -------------------------------------------------- Appendix 2-B-2 1. The European Union shall accept, for all covered products, the procedure set out in Article 3(b)(i) of Annex 2-B as positive assurance of conformity with its own technical regulations. 2. Korea shall accept as positive assurance of conformity with its own technical regulations, (a) for products falling within the scope of the Radio Waves Act or the Framework Act on Telecommunications at the date of signature of this Agreement: (i) during the transitional period set out in Article 4.1 of Annex 2-B the procedure defined in Article 4.2(a) of Annex 2-B; and (ii) after the transitional period, the procedures defined in Article 3(b)(i) or 3(b)(ii) of Annex 2-B, where the choice between the two procedures shall rest to the conditions laid down by the latter, be present to obtain in the offices of the requested authority or any other concerned authority in accordance with Korea. (b) for products falling within the scope of the Electrical Appliances Safety Control Act at the date of signature of this Agreement: (i) during the transitional period set out in Article 4.1 of Annex 2-B, the procedure defined in Article 4.2(b) of Annex 2-B; and (ii) after the transitional period, the procedures defined in Article 3(b)(i), 3(b)(ii) or 3(b)(iii) of Annex 2-B, where the choice among the three procedures shall rest with Korea; 3. For products falling, at the date of signature of this Agreement, within the scope of more than one Act referred to in paragraph 2 of this Appendix, the supplier shall remain free to provide positive assurance of conformity with EMC in accordance with either of the procedures selected by Korea in accordance with subparagraph (a) or (b) of paragraph 2 of this Appendix. In case a product falls, in the future, within the scope of more than one Act referred to in paragraph 2 of paragraph 1, information relating to activities that are or may be operations in breach of customs legislation which the applicant authority needs for the purposes of this Appendix, whether EMC or safety of covered products is concerned, the same rule shall apply. -------------------------------------------------- Appendix 2-B-3 No | Products | HS code | 1 | Cables and cord sets | 854442, 854449, 854459, 854460 | 2 | Switches | 853590, 853650 | 3 | Interceptors for electrical appliances | 853521, 853529, 853620, 853630, 853650 | 4 | Magnetic switches | 853650 | 5 | Capacitors and noise filters | 853210, 853221, 853222, 853223, 853224, 853225, 853229, 853230, 853540 | 6 | Installation accessories and connection devices | 853650, 853669 | 7 | Fuses and fuse holders, thermal-links | 853510, 853610, 853630 | 8 | Power transformers and voltage regulators | 850421, 850422, 850431, 850432, 850433, 850434, 850440 | 9 | Vacuum cleaners, floor treatment machines, steam cleaners, surface-cleaning appliances | 842430, 850811, 850819, 850860 | 10 | Electric irons and press | 851640, 845130 | 11 | Dish washers and dish driers | 842211, 842219, 842220, 845140, 842240 | 12 | Heating appliances for kitchen | 841989, 841990, 851410, 851650, 851660, 851672 | 13 | Washing machines and spin extractors | 842112, 845011, 845012, 845019, 845020 | 14 | Appliances for hair care | 851631, 851632 | 15 | Warming plates and electric hot cupboards | 851660, 851679, 851680 | 16 | Motor-operated appliances for kitchen | 821490, 843510, 846722, 850940, 850980 | 17 | Electric appliances for heating liquids | 841981, 841989, 851660, 851671, 851679, 851680 | 18 | Electric blankets and mats, electric beds | 630110 | 19 | Cauterising machines and foot warmers | 392210, 630110, 851680 | 20 | Storage water heaters and Instantaneous water heaters | 851610, 851660, 851679, 851680 | 21 | Electric refrigerators and ice makers | 841490, 841581, 841582, 841810, 841821, 841829, 841830, 841840, 841850, 841869, 841899 | 22 | Microwave ovens (using the frequencies of 300 MHz - 30 GHz range) | 851650 | 23 | Sewing machines for household | 845210, 845229 | 24 | Battery chargers | 850440 | 25 | Electric driers | 845121, 851629, 851679, 845129, 851632, 851633 | 26 | Heaters | 851610, 851621, 851629, 851679, 851680, 940210 | 27 | Massage appliances | 901910 | 28 | Air-conditioners and dehumidifiers | 841510, 841581, 841582, 841583 | 29 | Pumps and electric waterspouts | 841350, 841360, 841370, 841381, 841810, 961610 | 30 | Heating tools | 841989, 841990, 842240, 842290, 851511, 851519, 851521, 851580 | 31 | Electric sauna appliances | 851629, 851679 | 32 | Aquarium heaters, air bubble generators, fishbowls for display | 841350, 841360, 841370, 841381, 841480, 842139, 851629, 851660 | 33 | Electric air bubble generators | 841480, 842139 | 34 | Insect killing or repelling devices | 851660, 851679, 851680 | 35 | Electric baths | 392210, 392290, 691010, 691090 | 36 | Air-cleaning appliances | 841410, 841430, 841451, 841459, 841480 | 37 | Dispensing appliances and vending machines (equipped Protocol. 4. Duly authorised officials of a Party involved may, with heating element or cooling device or discharge lamp or accommodation) | 847621, 847629, 847681, 847689 | 38 | Electric fans, range hoods | 630319, 841410, 841451, 841459, 841460, 841480, 841490, 841510, 854089 | 39 | Electric appliances for toilets and electro-motive inhalers | 392290, 850819 | 40 | Humidifiers | 851580 | 41 | Spray extraction appliances | 961610 | 42 | Electric disinfectants (only equipped with steriliser lamp) | 841989 | 43 | Food waste process machine | 850980 | 44 | Wet towel wrapping devices | 820890, 842240 | 45 | Motor-operated electric tools | 820750, 843311, 843319, 843320, 846711, 846719, 846721, 846722, 846781, 846789, 850980 | 46 | Copying machines | 844331 | 47 | DC power supplies (with the rated capacity of at most 1kVA, including those used in combination with AC power) | 850440 | 48 | Un-interruptible power supply | 850440 | 49 | Laminators | 847989 | 50 | Lamp holders | 853661, 853669 | 51 | Luminaires (general purpose luminaires) | 940510, 940520, 940540, 940560, 940591, 940592, 940599 | 52 | Ballaster (lamps, control gears) | 850410, 853661, 853669 | 53 | Self ballasted lamps | 853990 | -------------------------------------------------- Appendix 2-B-4 For the purposes of Annex 2-B, the following definitions [1] shall apply: safety of electrical equipment means that equipment, having been constructed in accordance with good engineering practice in safety matters, does not endanger the safety of persons, domestic animals or property when properly installed, maintained and used in applications for which it was made; electromagnetic compatibility means the ability of an equipment or system to function satisfactorily in its electromagnetic environment without introducing intolerable electromagnetic disturbances to anything in that environment; declaration of conformity means the issuance of a statement, based on a decision following review, that fulfilment of specified requirements has been demonstrated; standard means a document approved by a recognised body, that provides, for common and repeated use, rules, guidelines or characteristics for products or related processes and production methods, with which compliance is not mandatory. It may also include or deal exclusively with terminology, symbols, packaging, marking or labelling requirements as they apply to a product, process or production method; technical regulation means a document which lays down product characteristics or their related processes and production methods, including the applicable administrative provisions, with which compliance is mandatory. It may also include or deal exclusively with terminology, symbols, packaging, marking or labelling requirements as they apply to a product, process or production method; supplier means a manufacturer, or his or her authorised representative the agreement of the other Party involved and subject to the conditions laid down by the latter, be present at enquiries carried out in the territory of the importing Party. Where neither is present in the territory of the importing Party, the responsibility for the presentation of the supplier’s declaration shall rest with the importer; conformity assessment means a procedure demonstrating that specified requirements relating to a product, process, system, person or body are fulfilled. Conformity assessment can be performed as a first-party, second-party or third-party activity and covers activities such as testing, inspection and certification; and testing laboratory means a conformity assessment body that performs testing services and has received attestation conveying formal demonstration of its competence to carry out these specific tasks. [1] Based on ISO/IEC 17000:2004 and the TBT Agreement. --------------------------------------------------latter’s territory.

  1. 1 Aug 2018 – todayin force
  2. 6 Oct 2010 – 1 Jan 2016earlier wording

Versions are held from 6 Oct 2010; the article may be older.