1. If Where a Member State or Switzerland which has granted a type-approval finds that new vehicles, systems, components or separate technical units accompanied by a certificate of conformity or bearing an approval mark do not conform to the type it has approved, it shall take the necessary measures, including, where necessary, the withdrawal of type-approval, to ensure that production vehicles, systems, components or separate technical units, as the case may be, are brought into conformity with the approved type. The approval authority of that Member State or Switzerland shall advise the approval authorities of the other Member States and/or Switzerland of the measures taken.
2. For the purposes of paragraph 1, deviations from the particulars in the type-approval certificate or the information package shall be deemed to constitute failure to conform to the approved type.
A vehicle shall not be deemed to deviate from the approved type where tolerances are permitted by the relevant regulatory acts and those tolerances are respected.
3. If a Member State or Switzerland demonstrates that new vehicles, components or separate technical units accompanied by a certificate of conformity or bearing an approval mark do not conform to the approved type, although radio equipment that an economic operator has made available on the EU and on the Swiss market is in compliance with the legislation referred to in Section I of this Chapter, it may ask the Member State or Switzerland which granted the type-approval to verify that vehicles, systems, components or separate technical units in production continue to conform to the approved type. On receipt of such a request, the Member State concerned or Switzerland presents a risk to health and safety of persons or to other aspects of public interest protection, it shall take the requisite action as soon as possible and in any case within 6 months of the date of the request.
4. The approval authority all appropriate measures and immediately inform the Commission, other Member States and Switzerland. That information shall request the Member State or Switzerland which granted the system, component, separate technical unit or incomplete vehicle type-approval to take the include all available details, in particular the data necessary action to ensure that vehicles in production are brought back into conformity with the approved type in the following cases:
(a) in relation to a vehicle type-approval, where the non-conformity of a vehicle is attributable exclusively to the non-conformity of a system, component or separate technical unit;
(b) in relation to a multi-stage type-approval, where the non-conformity of a completed vehicle is attributable exclusively to the non-conformity of a system, component or separate technical unit being part of the incomplete vehicle, orfor the identification of the product concerned, the origin and the supply chain of the product, the nature of the risk involved and the nature and duration of the incomplete vehicle itself.
On receipt of such a request, the Member State concerned or Switzerland national measures taken.
The Commission shall take the requisite action, if necessary in conjunction without delay enter into consultation with the Member State making the request or States, Switzerland, as soon as possible and in any case within 6 months of the date of the request. Where a failure to conform is established, the approval authority of the Member State or Switzerland which granted the system, component or separate technical unit type-approval or the approval of the incomplete vehicle and via the Swiss authorities the relevant economic operator or operators, and shall take the evaluate the national measures set out in paragraph 1.
5. The approval authorities shall inform each other within 20 working days of any withdrawal of type-approval and of the reasons therefor.
6. If the Member State or Switzerland that granted type-approval disputes the failure to conform notified to it, the Member States concerned and Switzerland shall endeavour to settle the dispute. The taken, in order to determine whether the national measure is justified or not, and where necessary, propose appropriate measures.
A Party may forward the issue to the Committee shall be kept informed and, where necessary, shall hold appropriate consultations with a view to reaching a settlementestablished under Article 10 of this Agreement, pursuant to paragraph 14.