Council Directive 91/440/EEC of 29 July 1991 on the development of the Community’s railways (OJ L 237, 24.8.1991, p. 25).
Council Directive 95/18/EC of 19 June 1995 on the licensing of railway undertakings (OJ L 143, 27.6.1995, p. 70).
Council Directive 95/19/EC of 19 June 1995 on the allocation of railway infrastructure capacity and the charging of infrastructure fees (OJ L 143, 27.6.1995, p. 75).
Directive 2004/49/EC of the European Parliament and of the Council of 29 April 2004 on safety on the Community’s railways and amending Council Directive 95/18/EC on the licensing of railway undertakings and Directive 2001/14/EC on the allocation of railway infrastructure capacity and the levying of charges for the use of railway infrastructure and safety certification (Railway Safety Directive) (OJ L 164, 30.4.2004, p. 44), as last amended by Commission Directive 2014/88/EU of 9 July 2014 (OJ L 201, 10.7.2014, p. 9).
Directive 2007/59/EC of the European Parliament and of the Council of 23 October 2007 on the certification of train drivers operating locomotives and trains on the railway system in the Community (OJ L 315, 3.12.2007, p. 51), as last amended by Commission Regulation (EU) 2019/554 of 5 April 2019 (OJ L 97, 8.4.2019, p. 1).
Commission Regulation (EC) No 653/2007 of 13 June 2007 on the use of a common European format for safety certificates and application documents in accordance with Article 10 of Directive 2004/49/EC of the European Parliament and of the Council and on the validity of safety certificates delivered under Directive 2001/14/EC (OJ L 153, 14.6.2007, p. 9), as amended by Commission Regulation (EU) No 445/2011 of 10 May 2011 (OJ L 122, 11.5.2011, p. 22).
Commission Decision 2007/756/EC of 9 November 2007 adopting a common specification of the national vehicle register provided for under Articles 14(4) and (5) of Directives 96/48/EC and 2001/16/EC (OJ L 305, 23.11.2007, p. 30), as amended by Commission Decision 2011/107/EU of 10 February 2011 (OJ L 43, 17.2.2011, p. 33).
Regulation (EC) No 1371/2007 of the European Parliament and of the Council of 23 October 2007 on rail passengers’ rights and obligations (OJ L 315, 3.12.2007, p. 14).
Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast) (OJ L 191, 18.7.2008, p. 1), as last amended by Commission Directive 2014/38/EU of 10 March 2014 (OJ L 70, 11.3.2014, p. 20).
Commission Decision 2009/965/EC of 30 November 2009 on the reference document referred to in Article 27(4) of Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community (OJ L 341, 22.12.2009, p. 1), as amended by Commission Implementing Decision (EU) 2015/2299 of 17 November 2015 (OJ L 324, 10.12.2015, p. 15).
Commission Regulation (EU) No 36/2010 of 3 December 2009 on Community models for train driving licences, complementary certificates, certified copies of complementary certificates and application forms for train driving licences, under Directive 2007/59/EC of the European Parliament and the Council (OJ L 13, 19.1.2010, p. 1).
Commission Decision 2010/713/EU of 9 November 2010 on modules for the procedures for assessment of conformity, suitability for use and EC verification to be used in the technical specifications for interoperability adopted under Directive 2008/57/EC of the European Parliament and of the Council (OJ L 319, 4.12.2010, p. 1).
Commission Regulation (EU) No 1158/2010 of 9 December 2010 on a common safety method for assessing conformity with the requirements for obtaining railway safety certificates (OJ L 326, 10.12.2010, p. 11).
Commission Regulation (EU) No 1169/2010 of 10 December 2010 on a common safety method for assessing conformity with the requirements for obtaining a railway safety authorisation (OJ L 327, 11.12.2010, p. 13).
Regulation (EU) No 201/2011 of 1 March 2011 on the model of declaration of conformity to an authorised type of railway vehicle (OJ L 57, 2.3.2011, p. 8).
Commission Regulation (EU) No 445/2011 of 10 May 2011 on a system of certification of entities in charge of maintenance for freight wagons and amending Regulation (EC) No 653/2007 (OJ L 122, 11.5.2011, p. 22).
Commission Regulation (EU) No 454/2011 of 5 May 2011 on the technical specification for interoperability relating to the subsystem ‘telematics applications for passenger services’ of the trans-European rail system (OJ L 123, 12.5.2011, p. 11), as last amended by Commission Implementing Regulation (EU) 2019/775 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 103).
Commission Implementing Decision 2011/665/EU of 4 October 2011 on the European register of authorised types of railway vehicles (OJ L 264, 8.10.2011, p. 32), as last amended by Commission Implementing Regulation (EU) 2023/1696 of 10 August 2023 (OJ L 222 I, 8.9.2023, p. 561)
Commission Decision 2011/765/EU of 22 November 2011 on criteria for the recognition of training centres involved in the training of train drivers, on criteria for the recognition of examiners of train drivers and on criteria for the organisation of examinations in accordance with Directive 2007/59/EC of the European Parliament and of the Council (OJ L 314, 29.11.2011, p. 36).
Commission Regulation (EU) No 1078/2012 of 16 November 2012 on a common safety method for monitoring to be applied by railway undertakings, infrastructure managers after receiving a safety certificate or safety authorisation and by entities in charge of maintenance (OJ L 320, 17.11.2012, p. 8).
Commission Regulation (EU) No 321/2013 of 13 March 2013 concerning the technical specification for interoperability relating to the subsystem ‘rolling stock – freight wagons’ of the rail system in the European Union and repealing Decision 2006/861/EC (OJ L 104, 12.4.2013, p. 1), as last amended by Commission Implementing Regulation (EU) 2023/1694 of 10 August 2023 (OJ L 222, 8.9.2023, p. 88).
Commission Implementing Regulation (EU) No 402/2013 of 30 April 2013 on the common safety method for risk evaluation and assessment and repealing Regulation (EC) No 352/2009 (OJ L 121, 3.5.2013, p. 8), as amended by Commission Implementing Regulation (EU) 2015/1136 of 13 July 2015 (OJ L 185, 14.7.2015, p. 6).
Commission Regulation (EU) No 1299/2014 of 18 November 2014 on the technical specifications for interoperability relating to the ‘infrastructure’ subsystem of the rail system in the European Union (OJ L 356, 12.12.2014, p. 1), as last amended by Commission Implementing Regulation (EU) 2023/1694 of 10 August 2023 (OJ L 222, 8.9.2023, p. 88).
The following specific cases referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
Permanent specific case CH-TSI INF-001: Infrastructure gauge: general The compatibility of OCF gauges with the international gauges under EN 15273-1:2013+A1:2016 is as follows:
G1 gauge: admission without restrictions.
GA gauge: admission with restrictions for gauge OCF O1. The formulae associated with the G1 gauge are to be applied to calculate the kinematic gauge of rolling stock (upper part) for all heights h. In Switzerland the use of the special features provided for in EN 15273-2, Annex B, B.3.3.1, B.3.4.1, B.3.5.1 and B.3.6.1, is not authorised for heights h > 3,250 m. Gauge OCF O1 is compatible with standard loads for gauge GA as specified in leaflet UIC 506, Annex B, Article B.1.1.
GB gauge: admission with restrictions for gauge OCF O2. The formulae associated with the G1 gauge are to be applied to calculate the kinematic gauge of rolling stock (upper part) for all heights h. In Switzerland the use of the special features provided for in EN 15273-2, Annex B, B.3.3.1, B.3.4.1, B.3.5.1 and B.3.6.1, is not authorised for heights h > 3,250 m. Gauge OCF O2 is compatible with standard loads for gauge GB as specified in leaflet UIC 506, Annex B, Article B.1.1.
GC gauge: admission without restrictions for gauge OCF O4. The infrastructure gauge (upper part) for all types of gauge (e.g. OCF O1, OCF O2, OCF O4) is calculated in accordance with EN 15273-1:2013, Annex C, C.2.1, Table C1 (Annex C, C.2.3, Table C4 respectively), subject to the reference kinematic profiles and the associated calculation rules. Use of the formulae under EN 15273-3:2013, Annex C, Tables C.2 and C.3 (for heights h > 3,250 m) is not permitted in Switzerland.
Permanent specific case CH-TSI INF-002: Doors and steps in the open position. In Switzerland the provisions for the implementation of the Railways Ordinance DE-OCF, Article 47.2, point 7 must be complied with, in addition to the conditions according to EN 15273-2, Annex A, A3.14 ‘Specific rules for doors and steps in the open position’. In accordance to these provisions, the exceedance of the maximum vehicle construction gauge by the value wi, without exceeding 0,035 m, cannot be accepted below 0,6m above the rail. However, entrance doors that meet the conditions in leaflet UIC 560, points 1.1.4 to 1.1.4.3 are permitted.
Permanent specific case CH-TSI INF-007: Small radii (R < 250 m) related acceptance procedure. In order to allow using a line with a large number of radii < 250 m, an acceptance procedure of running characteristics of railway vehicles for this range of radii is necessary (see also R RTE 29001). The specifications for test and assessment are defined in regulation SBB R I-50127, based on EN 14363:2016+A2:2022 (2nd edition). Vehicles that do meet these requirements are not allowed to run on the defined lines with a large number of very small radii (see SBB R I-50127, point 1.2).
Permanent specific case CH-TSI INF-008: Presence of tight deflection curves and switches. The track layout in some station areas in Switzerland is technically difficult to use due to the presence of tight deflection curves (radii below 160 m) and short intermediate sections of track with correspondingly small distance between track centres. Therefore an acceptance procedure of assessment of vehicle behaviour in switches and crossings is necessary. EN 14363:2016+A2:2022 (2nd edition) does not specify any requirements for the assessment of vehicle behaviour in switches and crossings. The specifications for test and assessment of vehicle behaviour in switches and crossings applicable in Switzerland are defined in regulations R RTE 29001 and SBB R I-50007. Vehicles that do not meet the requirements of the SBB R I-50007 regulation are not allowed to run in regular service on the Swiss rail network.
Permanent specific case CH-TSI INF-010: Permissible sum of guiding forces of vehicles per wheelset. The permissible track displacement resistance of the infrastructure limits the maximum permissible sum of guiding forces of vehicles per wheelset. Due to the design of the track superstructure, a coefficient of α = k1 = 0,85 has to be used in Switzerland as a standard value for the calculation of the maximum permissible sum of guiding forces of a tested vehicle. A coefficient of α = k1 = 1,0 can only be applied in exceptional cases and requires special clarifications. Track tests for the running dynamic have to be carried out based on α = k1 = 0,85.
Permanent specific case CH-TSI INF-013: Vehicles tests for Swiss cant deficiencies to guarantee safe operation. The definition of permissible speed on the Swiss rail network bases on cant deficiencies of 130 mm (standard for freight trains) or 150 mm (standard for passenger trains) which apply without further assessment. It is therefore mandatory to test vehicles for such cant deficiencies to guarantee safe operation. Vehicles not tested for these cant deficiency levels are not allowed to run on the Swiss railway network.
Permanent specific case CH-TSI INF-014: Requirements with regard to minimal radius < 150 m. In Switzerland, the minimum radius set out for the free use of vehicles applies to:
train tracks: 150 m
shunting tracks; 135 m
connecting tracks; 80 m (free use of shunting locomotives and freight bogie wagons) and 35 m (smallest permitted radius of horizontal curve for certain wagons in extreme case).
These radii are based on the requirement in regulations R RTE 29001 and SBB R I-50007. They are based on the requirements of leaflet UIC 645. Vehicles not meeting these requirements must expect restrictions in the usability of shunting and connecting tracks (e.g. very important for automatic coupling systems).
Permanent specific case CH-TSI INF-017: Platforms – Design (height and distance from the track centre line) and track layout (radius and cant).
The specifications for the design of platforms, i.e. height, distance from the track centre line and track layout alongside the platform (minimum radius, maximum cant) are specified in type approval ZR44TZ2009-02-0004, issued by the OFT on 3 August 2021. Furthermore a platform height of 350 mm above the rail is permissible if a platform height of 550 mm (standard platform height in Switzerland)
cannot be realised along the geometric course of the track; or
cannot be realised at a reasonable cost (in that case partial platform heights are permissible).
Platforms that are built according to the above-mentioned type approval do respect the requirements of the lower part of the structure gauge according to point 4.2.3.1, paragraph (2) of TSI Infrastructure.
There are therefore no restrictions on the passage of interoperable vehicles.
The following national rules referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
CH-TSI INF-004 (version 2.0 of June 2024): Maximum cant in small curve radii;
CH-TSI INF-005 (version 2.0 of June 2024): In-service geometry of switches and crossings;
CH-TSI INF-006 (version 2.0 of June 2024): Longitudinal track resistance; compatibility with braking systems;
CH-TSI INF-009 (version 2.0 of June 2024): Lateral track resistance; rolling stock homologation for tilting trains on specific lines. Cant deficiency on plain track and on the through of switches and crossings.
Commission Regulation (EU) No 1300/2014 of 18 November 2014 on the technical specifications for interoperability relating to accessibility of the Union's rail system for persons with disabilities and persons with reduced mobility (OJ L 356, 12.12.2014, p. 110), as last amended by Commission Implementing Regulation (EU) 2023/1694 of 10 August 2023 (OJ L 222, 8.9.2023, p. 88).
The following national rules referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
CH-TSI PRM-001 (version 2.0 of June 2021): Autonomous access to trains;
CH-TSI PRM-002 (June 2015): Infrastructure subsystem: Functional and technical specifications;
CH-TSI PRM-003 (June 2017): Infrastructure subsystem: Step position for vehicle access and egress.
Commission Regulation (EU) No 1301/2014 of 18 November 2014 on the technical specifications for interoperability relating to the ‘energy’ subsystem of the rail system in the Union (OJ L 356, 12.12.2014, p. 179), as last amended by Commission Implementing Regulation (EU) 2023/1694 of 10 August 2023 (OJ L 222, 8.9.2023, p. 88).
The following specific cases referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
Permanent specific case CH-TSI ENE-001: pantograph loading gauge (TSI reference Article 4.2.10(1)).
For new, updated or renewed ‘energy’ subsystems on the Swiss interoperable network, the pantograph loading gauge must be specified in accordance with the implementing provisions of the Railways Ordinance of 15 December 1983 (DE-OCF; RS 742.141.11) version of 1 July 2024, re Article 18, Normal track, DE 18, figures, Figure 12, and re Article 18/47.2, DE 18.2/47.2, Reference contour, point 14, as follows:
OCF S1: pantograph head geometry type 1450 mm with horns made of insulating material
OCF S2: pantograph head geometry type 1450 mm or 1600 mm with horns made of insulating material
OCF S3: pantograph head geometry type 1600 mm
OCF S4: pantograph head geometry type 1950 mm.
Comment: To operate on existing sections, electric units (rolling stock) must be equipped with a 1450 mm-wide pantograph head (with horns made of insulating material) in accordance with Figure B.1 of EN 50367:2020.
Commission Regulation (EU) No 1302/2014 of 18 November 2014 concerning a technical specification for interoperability relating to the ‘rolling stock – locomotives and passenger rolling stock’ subsystem of the rail system in the European Union (OJ L 356, 12.12.2014, p. 228), as last amended by Commission Implementing Regulation (EU) 2023/1694 of 10 August 2023 (OJ L 222, 8.9.2023, p. 88).
The following specific cases referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
Permanent specific case CH-STI LOC&PAS-004: Track displacement force (TSI reference Article 4.2.3.4)
The permissible track displacement resistance of the infrastructure limits the maximum permissible sum of guiding forces of vehicles per wheelset. Due to the design of the track superstructure, a coefficient of α = k1 = 0,85 has to be used in Switzerland as a standard value for the calculation of the maximum permissible sum of guiding forces of a tested vehicle. A coefficient of α = k1 = 1,0 can only be applied in exceptional cases and requires special clarifications. The dynamic type-approval tests must be carried out on the basis of the coefficient α = k1 = 0,85.
Permanent specific case CH-STI LOC&PAS-005: Cant deficiency (LOC&PAS TSI reference Article 4.2.3.4.2 and WAG TSI reference Article 4.2.3.5)
The definition of permissible speed on the Swiss rail network bases on cant deficiencies of 130 mm (standard for freight trains) or 150 mm (standard for passenger trains) which apply without further assessment. To ensure safe operation, it is therefore imperative that vehicles are examined in respect of such cant deficiencies. Vehicles which have not been examined in respect of such cant deficiencies cannot run on the Swiss rail network.
Permanent specific case CH-STI LOC&PAS-017: Infrastructure gauge: general (LOC&PAS TSI reference Article 4.2.3.1)
The compatibility of OCF gauges with the international gauges of EN 15273-1:2013 is as follows:
G1 gauge: admission without restrictions.
GA gauge: admission with restrictions for gauge OCF O1. The formulae associated with the G1 gauge are to be applied to calculate the kinematic gauge of rolling stock (upper part) for all heights h. In Switzerland the use of the special features provided for in EN 15273-2, Annex B, B.3.3.1, B.3.4.1, B.3.5.1 and B.3.6.1, is not authorised for heights h > 3,250 m. Gauge OCF O1 accepts standard loads for gauge GA as specified in leaflet UIC 506, Annex B, Article B.1.1.
GB gauge: admission with restrictions for gauge OCF O2. The formulae associated with the G1 gauge are to be applied to calculate the kinematic gauge of rolling stock (upper part) for all heights h. In Switzerland the use of the special features provided for in EN 15273-2, Annex B, B.3.3.1, B.3.4.1, B.3.5.1 and B.3.6.1, is not authorised for heights h > 3,250 m. Gauge OCF O2 accepts standard loads for gauge GB as specified in leaflet UIC 506, Annex B, Article B.1.1.
GC gauge: admission without restrictions for gauge OCF O4.
The infrastructure gauge (upper part) for all types of gauge (e.g. OCF O1, OCF O2, OCF O4) is calculated in accordance with EN 15273-1:2013, Annex C, C.2.1, Table C1 (Annex C, C.2.3, Table C4 respectively), subject to the reference kinematic profiles and the associated calculation rules. Use of the formulae under EN 15273-3:2013, Annex C, Tables C.2 and C.3 (for heights h > 3,250 m) is not permitted in Switzerland.
Permanent specific case CH-STI LOC&PAS-028: gauging, door area (LOC&PAS TSI reference Article 4.2.3.1)
In Switzerland, the requirements in accordance with DE-OCF, re Article 47, DE 47.2, point 7 must be complied with, in addition to the rules of EN 15273-2, Annex A, A.3.14 ‘Specific rules for doors and steps in the open position’. Accordingly, the construction gauge may not be exceeded for lateral entrance doors and for steps below 0,6 m above the running surface. However, entrance doors that meet the conditions in leaflet UIC 560, points 1.1.4 to 1.1.4.3 are permitted.
The following national rules referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
CH-TSI LOC&PAS-001 (version 1.1 of June 2024): Pantograph head width;
CH-TSI LOC&PAS-002 (version 2.1 of June 2024): Narrow switches / test of passage through switches;
CH-TSI LOC&PAS-003 (version 2.1 of June 2024): Tight curves r < 250 m;
CH-TSI LOC&PAS-006 (version 2.1 of June 2024): Authorisation of rolling stock with category N tilting system;
CH-TSI LOC&PAS-007 (version 2.1 of June 2024): Flange lubrication;
CH-TSI LOC&PAS-009 (version 1.1 of June 2024): Exhaust emissions from thermal vehicles (the rule may be incompatible with Regulation (EU) 2016/1628 and must be reviewed before 31 December 2027);
CH-TSI LOC&PAS-012 (version 1.0 of July 2016): Admittance;
CH-TSI LOC&PAS-013 (version 1.1 of June 2024): Pantograph / contact line interaction;
CH-TSI LOC&PAS-014a (version 2.0 of June 2021): Rolling stock characteristics compatible with train detection system based on track circuits;
CH-TSI LOC&PAS-014b (version 2.0 of June 2021): Rolling stock characteristics compatible with train detection system based on axle counters;
CH-TSI LOC&PAS-019 (version 3.0 of June 2024): Non-leading input signal (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2027);
CH-TSI LOC&PAS-020 (version 3.0 of June 2024): Sleeping-input signal with multiple-unit control (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2027);
CH-TSI LOC&PAS-022 (version 3.0 of June 2024): Resetting the emergency brake;
CH-TSI LOC&PAS-025 (version 2.2 of June 2024): Inhibited operability to disconnect ETCS on-board unit (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2027);
CH-TSI LOC&PAS-027 (version 3.0 of June 2024): Manual radio remote control in ‘shunting’ mode (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2027);
CH-TSI LOC&PAS-030 (version 2.0 of June 2021): Use of braking systems without static friction;
CH-TSI LOC&PAS-031 (version 3.0 of June 2024): Safe traction cut-off (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2027);