Council Directive 91/440/EEC of 29 July 1991 on the development of the Community’s railways (OJ L 237, 24.8.1991, p. 25).
Council Directive 95/18/EC of 19 June 1995 on the licensing of railway undertakings (OJ L 143, 27.6.1995, p. 70).
Council Directive 95/19/EC of 19 June 1995 on the allocation of railway infrastructure capacity and the charging of infrastructure fees (OJ L 143, 27.6.1995, p. 75).
Directive 2004/49/EC of the European Parliament and of the Council of 29 April 2004 on safety on the Community’s railways and amending Council Directive 95/18/EC on the licensing of railway undertakings and Directive 2001/14/EC on the allocation of railway infrastructure capacity and the levying of charges for the use of railway infrastructure and safety certification (Railway Safety Directive) (OJ L 164, 30.4.2004, p. 44), as last amended by Commission Directive 2014/88/EU of 9 July 2014 (OJ L 201, 10.7.2014, p. 9).
Directive 2007/59/EC of the European Parliament and of the Council of 23 October 2007 on the certification of train drivers operating locomotives and trains on the railway system in the Community (OJ L 315, 3.12.2007, p. 51), as last amended by Commission Regulation (EU) 2019/554 of 5 April 2019 (OJ L 97, 8.4.2019, p. 1).
Commission Regulation (EC) No 653/2007 of 13 June 2007 on the use of a common European format for safety certificates and application documents in accordance with Article 10 of Directive 2004/49/EC of the European Parliament and of the Council and on the validity of safety certificates delivered under Directive 2001/14/EC (OJ L 153, 14.6.2007, p. 9), as amended by Commission Regulation (EU) No 445/2011 of 10 May 2011 (OJ L 122, 11.5.2011, p. 22).
Commission Decision 2007/756/EC of 9 November 2007 adopting a common specification of the national vehicle register provided for under Articles 14(4) and (5) of Directives 96/48/EC and 2001/16/EC (OJ L 305, 23.11.2007, p. 30), as amended by Commission Decision 2011/107/EU of 10 February 2011 (OJ L 43, 17.2.2011, p. 33).
Regulation (EC) No 1371/2007 of the European Parliament and of the Council of 23 October 2007 on rail passengers’ rights and obligations (OJ L 315, 3.12.2007, p. 14).
Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast) (OJ L 191, 18.7.2008, p. 1), as last amended by Commission Directive 2014/38/EU of 10 March 2014 (OJ L 70, 11.3.2014, p. 20).
Commission Decision 2009/965/EC of 30 November 2009 on the reference document referred to in Article 27(4) of Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community (OJ L 341, 22.12.2009, p. 1), as amended by Commission Implementing Decision (EU) 2015/2299 of 17 November 2015 (OJ L 324, 10.12.2015, p. 15).
Commission Regulation (EU) No 36/2010 of 3 December 2009 on Community models for train driving licences, complementary certificates, certified copies of complementary certificates and application forms for train driving licences, under Directive 2007/59/EC of the European Parliament and the Council (OJ L 13, 19.1.2010, p. 1).
Commission Decision 2010/713/EU of 9 November 2010 on modules for the procedures for assessment of conformity, suitability for use and EC verification to be used in the technical specifications for interoperability adopted under Directive 2008/57/EC of the European Parliament and of the Council (OJ L 319, 4.12.2010, p. 1).
Commission Regulation (EU) No 1158/2010 of 9 December 2010 on a common safety method for assessing conformity with the requirements for obtaining railway safety certificates (OJ L 326, 10.12.2010, p. 11).
Commission Regulation (EU) No 1169/2010 of 10 December 2010 on a common safety method for assessing conformity with the requirements for obtaining a railway safety authorisation (OJ L 327, 11.12.2010, p. 13).
Regulation (EU) No 201/2011 of 1 March 2011 on the model of declaration of conformity to an authorised type of railway vehicle (OJ L 57, 2.3.2011, p. 8).
Commission Regulation (EU) No 445/2011 of 10 May 2011 on a system of certification of entities in charge of maintenance for freight wagons and amending Regulation (EC) No 653/2007 (OJ L 122, 11.5.2011, p. 22).
Commission Regulation (EU) No 454/2011 of 5 May 2011 on the technical specification for interoperability relating to the subsystem ‘telematics applications for passenger services’ of the trans-European rail system (OJ L 123, 12.5.2011, p. 11), as last amended by Commission Implementing Regulation (EU) 2019/775 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 103).
Commission Implementing Decision 2011/665/EU of 4 October 2011 on the European register of authorised types of railway vehicles (OJ L 264, 8.10.2011, p. 32), as amended by Commission Implementing Regulation (EU) 2019/776 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 108).
Commission Decision 2011/765/EU of 22 November 2011 on criteria for the recognition of training centres involved in the training of train drivers, on criteria for the recognition of examiners of train drivers and on criteria for the organisation of examinations in accordance with Directive 2007/59/EC of the European Parliament and of the Council (OJ L 314, 29.11.2011, p. 36).
Commission Regulation (EU) No 1078/2012 of 16 November 2012 on a common safety method for monitoring to be applied by railway undertakings, infrastructure managers after receiving a safety certificate or safety authorisation and by entities in charge of maintenance (OJ L 320, 17.11.2012, p. 8).
Commission Regulation (EU) No 321/2013 of 13 March 2013 concerning the technical specification for interoperability relating to the subsystem ‘rolling stock – freight wagons’ of the rail system in the European Union and repealing Decision 2006/861/EC (OJ L 104, 12.4.2013, p. 1), as last amended by Commission Implementing Regulation (EU) 2019/776 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 108).
Commission Implementing Regulation (EU) No 402/2013 of 30 April 2013 on the common safety method for risk evaluation and assessment and repealing Regulation (EC) No 352/2009 (OJ L 121, 3.5.2013, p. 8), as amended by Commission Implementing Regulation (EU) 2015/1136 of 13 July 2015 (OJ L 185, 14.7.2015, p. 6).
Commission Regulation (EU) No 1299/2014 of 18 November 2014 on the technical specifications for interoperability relating to the ‘infrastructure’ subsystem of the rail system in the European Union (OJ L 356, 12.12.2014, p. 1), as amended by Commission Implementing Regulation (EU) 2019/776 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 108).
Commission Regulation (EU) No 1300/2014 of 18 November 2014 on the technical specifications for interoperability relating to accessibility of the Union’s rail system for persons with disabilities and persons with reduced mobility (OJ L 356, 12.12.2014, p. 110), as amended by Commission Implementing Regulation (EU) 2019/772 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 1).
The national rule referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
CH-TSI PRM-001 (version 2.0 of June 2021): Autonomous access to trains
Commission Regulation (EU) No 1301/2014 of 18 November 2014 on the technical specifications for interoperability relating to the ‘energy’ subsystem of the rail system in the Union (OJ L 356, 12.12.2014, p. 179), as last amended by Commission Implementing Regulation (EU) 2019/776 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 108).
The following specific cases referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
Permanent specific case CH-TSI ENE-001: Pantograph loading gauge(TSI reference Article 4.2.10(2))
For new, updated or renewed ‘energy’ subsystems on the Swiss interoperable network, the pantograph loading gauge must be specified in accordance with the implementing provisions of the Railways Ordinance of 15 December 1983 (DE-OCF), version of 1 November 2020, re Article 18, Normal track, DE 18, figures, Figure 12, and re Art. 18/47, DE 18.2/47.2, Reference contour, Chapter 14, as follows:
OCF S1: pantograph head geometry type 1450 mm with horns made of insulating material
OCF S2: pantograph head geometry type 1450 mm or 1600 mm with horns made of insulating material
OCF S3: pantograph head geometry type 1600 mm
OCF S4: pantograph head geometry type 1950 mm
NB: To operate on existing sections, electric units (rolling stock) must be equipped with a 1450 mm-wide pantograph head (with horns made of insulating material) in accordance with Figure B.1 of EN 50367:2020.
Permanent specific case CH-TSI ENE-002: Mean useful voltage certificate(TSI reference Article 6.2.4.1)
Alternatively to assessment of mean useful voltage according to prEN 50388:xxxx, clause 15.4, the power supply performance may also be assessed by:
a comparison with a reference where the power supply solution has been used for a similar or more demanding train schedule. The reference shall have a similar or larger:
distance to the voltage-controlled bus bar (frequency converter station);
impedance of the OCL system;
a rough estimation of Umean useful for simple cases resulting in an increased additional capacity for future traffic demands.
Commission Regulation (EU) No 1302/2014 of 18 November 2014 concerning a technical specification for interoperability relating to the ‘rolling stock – locomotives and passenger rolling stock’ subsystem of the rail system in the European Union (OJ L 356, 12.12.2014, p. 228), as last amended by Commission Implementing Regulation (EU) 2019/776 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 108).
The following specific cases referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
Permanent specific case CH-TSI LOC&PAS-004: Track displacement force(TSI reference Article 4.2.3.4)
The maximum permissible track displacement force (sum of the guiding forces) per axle is limited on the infrastructure side by the permissible track displacement resistance. Given the design of the track superstructure in Switzerland, a coefficient α = k1 = 0.85 should be applied as a regulatory value to calculate the maximum permissible track displacement force.
A coefficient α = k1 = 1.0 may be applied in exceptional cases and requires special checks.
The dynamic type-approval tests must be carried out on the basis of the coefficient α = k1 = 0.85.
Permanent specific case CH-TSI LOC&PAS-005: Cant deficiency(LOC&PAS TSI reference Article 4.2.3.4.2 and WAG TSI reference Article 4.2.3.5)
The permissible running speed on the Swiss rail network is defined on the basis of a cant deficiency of 130 mm (freight trains) and 150 mm (passenger trains); these cant deficiencies are accepted without further examination. To ensure safe operation, it is therefore imperative that vehicles are examined in respect of such cant deficiencies.
Vehicles which have not been examined in respect of such cant deficiencies cannot run on the Swiss rail network.
Permanent specific case CH-TSI LOC&PAS-017: Infrastructure gauge: general(LOC&PAS TSI reference Article 4.2.3.1)
The compatibility of OCF gauges with the international gauges of EN 15273-1:2013 is as follows:
G1 gauge: admission without restrictions.
GA gauge: admission with restrictions for gauge OCF O1. The formulae associated with the G1 gauge are to be applied to calculate the kinematic gauge of rolling stock (upper part) for all heights h. In Switzerland the use of the special features provided for in EN 15273-2, Annex B, B.3.3.1, B.3.4.1, B.3.5.1 and B.3.6.1, is not authorised for heights h > 3.250 m. Gauge OCF O1 accepts standard loads for gauge GA as specified in file UIC 506, Annex B, Article B.1.1.
GB gauge: admission with restrictions for gauge OCF O2. The formulae associated with the G1 gauge are to be applied to calculate the kinematic gauge of rolling stock (upper part) for all heights h. In Switzerland the use of the special features provided for in EN 15273-2, Annex B, B.3.3.1, B.3.4.1, B.3.5.1 and B.3.6.1, is not authorised for heights h > 3.250 m. Gauge OCF O2 accepts standard loads for gauge GB as specified in file UIC 506, Annex B, Article B.1.1.
GC gauge: admission without restrictions for gauge OCF O4.
The infrastructure gauge (upper part) for all types of gauge (e.g. OCF O1, OCF O2, OCF O4) is calculated in accordance with EN 15273-1:2013, Annex C, C.2.1, Table C1 (Annex C, C.2.3, Table C4 respectively), subject to the reference kinematic profiles and the associated calculation rules. Use of the formulae under EN 15273-3:2013, Annex C, Tables C.2 and C.3 (for heights h > 3.250 m) is not permitted in Switzerland.
Permanent specific case CH-TSI LOC&PAS-028: Gauging, door area(LOC&PAS TSI reference Article 4.2.3.1)
Boarding doors meeting the requirements of UIC 560, Chapters 1.1.4 to 1.1.4.3, are permitted. In general, the following points apply:
The compatibility of OCF gauges with the international gauges of EN 15273-1:2013 is as follows:
G1 gauge: admission without restrictions.
GA gauge: admission with restrictions for gauge OCF O1. The formulae associated with the G1 gauge are to be applied to calculate the kinematic gauge of rolling stock (upper part) for all heights h. In Switzerland the use of the special features provided for in EN 15273-2, Annex B, B.3.3.1, B.3.4.1, B.3.5.1 and B.3.6.1, is not authorised for heights h > 3.250 m. Gauge OCF O1 accepts standard loads for gauge GA as specified in file UIC 506, Annex B, Article B.1.1.
GB gauge: admission with restrictions for gauge OCF O2. The formulae associated with the G1 gauge are to be applied to calculate the kinematic gauge of rolling stock (upper part) for all heights h. In Switzerland the use of the special features provided for in EN 15273-2, Annex B, B.3.3.1, B.3.4.1, B.3.5.1 and B.3.6.1, is not authorised for heights h > 3.250 m. Gauge OCF O2 accepts standard loads for gauge GB as specified in file UIC 506, Annex B, Article B.1.1.
GC gauge: admission without restrictions for gauge OCF O4.
The infrastructure gauge (upper part) for all types of gauge (e.g. OCF O1, OCF O2, OCF O4) is calculated in accordance with EN 15273-1:2013, Annex C, C.2.1, Table C1 (Annex C, C.2.3, Table C4 respectively), subject to the reference kinematic profiles and the associated calculation rules. Use of the formulae under EN 15273-3:2013, Annex C, Tables C.2 and C.3 (for heights h > 3.250 m) is not permitted in Switzerland.
The following national rules referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
CH-TSI LOC&PAS-001 (version 1.0 of June 2015): Pantograph head width;
CH-TSI LOC&PAS-002 (version 2.0 of June 2021): Narrow switches / test of passage through switches;
CH-TSI LOC&PAS-003 (version 2.0 of June 2021): Tight curves r < 250 m;
CH-TSI LOC&PAS-006 (version 2.0 of June 2021): Authorisation of rolling stock with category N tilting system;
CH-TSI LOC&PAS-007 (version 2.0 of June 2021): Flange lubrication;
CH-TSI LOC&PAS-009 (version 1.0 of June 2015): Exhaust emissions from thermal vehicles (the rule may be incompatible with Regulation (EU) 2016/1628 and must be reviewed before 31 December 2022);
CH-TSI LOC&PAS-011 (version 2.0 of June 2021): Traction limitation;
CH-TSI LOC&PAS-012 (version 1.0 of July 2016): Admittance;
CH-TSI LOC&PAS-013 (version 1.0 of July 2016): Pantograph / contact line interaction;
CH-TSI LOC&PAS-014a (version 2.0 of June 2021): Rolling stock characteristics compatible with train detection system based on track circuits;
CH-TSI LOC&PAS-014b (version 2.0 of June 2021): Rolling stock characteristics compatible with train detection system based on axle counters;
CH-TSI LOC&PAS-019 (version 2.0 of June 2019): Non-leading input signal (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2022);
CH-TSI LOC&PAS-020 (version 2.0 of June 2019): Sleeping-input signal with multiple-unit control (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2022);
CH-TSI LOC&PAS-022 (version 2.1 of June 2021): Resetting the emergency brake;
CH-TSI LOC&PAS-025 (version 2.0 of June 2019): Inhibited operability to disconnect ETCS on-board unit (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2022);
CH-TSI LOC&PAS-026 (version 2.0 of June 2019): SIGNUM/ZUB not permitted on vehicles with ERTMS/ETCS Baseline 3;
CH-TSI LOC&PAS-027 (version 2.0 of June 2019): Manual radio remote control in ‘shunting’ mode (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2022);
CH-TSI LOC&PAS-030 (version 2.0 of June 2021): Use of braking systems without static friction;
CH-TSI LOC&PAS-031 (version 2.1 of November 2020): Safe traction cut-off (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2022);
CH-TSI LOC&PAS-035 (version 2.1 of November 2020): Sufficient braking performance during emergency braking (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2022);
CH-TSI LOC&PAS-036 (version 2.0 of June 2019): Vehicles with a control panel for both directions of travel (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2022);
CH-TSI LOC&PAS-037 (version 1.0 of June 2019): ETCS service brake (the rule may be incompatible with Regulation (EU) No 1302/2014 and must be reviewed before 31 December 2022).
Commission Regulation (EU) No 1303/2014 of 18 November 2014 concerning the technical specification for interoperability relating to ‘safety in railway tunnels’ of the rail system of the European Union (OJ L 356, 12.12.2014, p. 394), as last amended by Commission Implementing Regulation (EU) 2019/776 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 108).
Commission Regulation (EU) No 1304/2014 of 26 November 2014 on the technical specification for interoperability relating to the subsystem ‘rolling stock – noise’ amending Decision 2008/232/EC and repealing Decision 2011/229/EU (OJ L 356, 12.12.2014, p. 421).
Commission Regulation (EU) No 1305/2014 of 11 December 2014 on the technical specification for interoperability relating to the telematics applications for freight subsystem of the rail system in the European Union and repealing the Regulation (EC) No 62/2006 (OJ L 356, 12.12.2014, p. 438), as last amended by Commission Implementing Regulation (EU) 2019/778 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 356).
Commission Implementing Regulation (EU) 2015/171 of 4 February 2015 on certain aspects of the procedure of licensing railway undertakings (OJ L 29, 5.2.2015, p. 3).
Commission Implementing Regulation (EU) 2015/909 of 12 June 2015 on the modalities for the calculation of the cost that is directly incurred as a result of operating the train service (OJ L 148, 13.6.2015, p. 17).
Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (OJ L 138, 26.5.2016, p. 44); only the following provisions shall apply in Switzerland: Articles 7 (paragraphs 1 to 3), 8 to 10, 12, 15, 17, 21 (excluding paragraph 7), 22 to 25, 27 to 42, 44, 45 and 49 and Annexes II, III and IV.
Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (OJ L 138, 26.5.2016, p. 102); only the following provisions shall apply in Switzerland: Articles 9, 10 (excluding paragraph 7), 13, 14 and 17 and Annex III.
Commission Regulation (EU) 2016/919 of 27 May 2016 on the technical specification for interoperability relating to the ‘control-command and signalling’ subsystems of the rail system in the European Union (OJ L 158, 15.6.2016, p. 1), as amended by Commission Implementing Regulation (EU) 2019/776 of 16 May 2019 (OJ L 139I, 27.5.2019, p. 108).
The following national rules referred to in Article 6 of Decision No 2/2019 of the Joint Committee shall apply in Switzerland:
CH-TSI CCS-003 (version 2.0 of June 2019): Activation/deactivation of transfer of packet 44 to SIGNUM/ZUB;
CH-TSI CCS-006 (version 2.1 of November 2020): Loss of ‘non-leading permitted’ in ‘non-leading’ mode (the rule may be incompatible with Regulation (EU) 2016/919 and must be reviewed before 31 December 2022);
CH-TSI CCS-007 (version 3.0 of November 2020): Braking curve requirement for ERTMS/ETCS Baseline 2;
CH-TSI CCS-008 (version 3.0 of June 2021): Minimally implemented change requests;
CH-TSI CCS-011 (version 2.0 of June 2019): Euroloop functionality;
CH-TSI CCS-015 (version 2.0 of June 2019): Simultaneous control of two GSM-R data channels;
CH-TSI CCS-016 (version 3.0 of June 2021): Application of country-specific parameters and functions;
CH-TSI CCS-018 (version 2.0 of June 2019): Level STM/NTC prohibited for SIGNUM/ZUB;
CH-TSI CCS-019 (version 3.0 of November 2020): Acceptance and display of train data (the rule may be incompatible with Regulation (EU) 2016/919 and must be reviewed before 31 December 2022);
CH-TSI CCS-022 (version 2.0 of June 2019): Reversing in ‘unfitted’ mode;
CH-TSI CCS-023 (version 2.0 of June 2019): Text message display;
CH-TSI CCS-024 (version 3.0 of June 2021): Flexible data entry;
CH-TSI CCS-026 (version 2.1 of November 2020): Online on-board monitoring of line equipment (the rule may be incompatible with Regulation (EU) 2016/919 and must be reviewed before 31 December 2022);
CH-TSI CCS-032 (version 2.1 of November 2020): Unique number for ETCS on-board equipment and GSM-R cab radio (the rule may be incompatible with Regulation (EU) 2016/919 and must be reviewed before 31 December 2022);
CH-TSI CCS-033 (version 1.1 of November 2020): GSM-R voice functionalities (the rule may be incompatible with Regulation (EU) 2016/919 and must be reviewed before 31 December 2022);
CH-TSI CCS-034 (version 1.0 of June 2019): ‘non-leading’ mode;
CH-TSI CCS-035 (version 1.0 of June 2019): Text to be displayed at the DMI (the rule may be incompatible with Regulation (EU) 2016/919 and must be reviewed before 31 December 2022);
CH-TSI CCS-038 (version 1.1 of November 2020): Disclosure of large odometry confidence interval (the rule may be incompatible with Regulation (EU) 2016/919 and must be reviewed before 31 December 2022);