1201000000Previous document
Indicate details relating to the previous document.
For the Member States of the European Union – Enter the details related to the writing-off of the goods declared in the declaration concerned, in relation with the ending of the temporary storage. Such details shall include the writing-off quantity and the respective measurement unit.
1201001000Reference number
Give the reference 99 02 000 000Guarantee type
Using the relevant codes, enter the type of guarantee used for the temporary storage or the previous customs procedure or corresponding customs documents.
For the Member States of the European Union – if the export is followed by transit, enter the MRN of the export declaration operation.
The identification number or another recognisable reference codes applicable are given below:
[For Member States of the document is inserted here.
In case the MRN is referred to as previous document, the reference number shall have the following structure:
Field | Content | Format | Examples
1 | Last two digits of year of formal acceptance of the declaration (YY) | n2 | 21
2 | Identifier of the country where the declaration / notification is lodged (Country Code as referred to in introductory note 8 number 3) | a2 | RO
3 | Unique identifier for message per year and country | an 12 | 9876AB889012
4 | Procedure identifier | a1 | B
5 | Check digit | an1 | 1
Fields 1 and 2 as explained above.
Field 3 shall be filled in with an identifier for the message concerned. The way that field is used is under the responsibility of national administrations but each message handled during one year within the given country must have a unique number in relation to the procedure concerned.
National administrations that want to have the reference number of the competent customs office included in the MRN, may use up to the first 6 characters to represent it.
Field 4 shall be filled in with an identifierEuropean Union.]
Code | Description
0 | For guarantee waiver (Article 75(2)(c) of Appendix I).
1 | For comprehensive guarantee (Article 75(1) and (2)(a) and (b) of Appendix I).
2 | For individual guarantee in the form of an undertaking by a guarantor (Article 20 of Appendix I).
3 | For individual guarantee in cash or other means of payment recognised by the customs authorities as being equivalent to a cash deposit, made in euro or in the currency of the country in which the guarantee is required (Article 19 of Appendix I).
4 | For individual guarantee in the form of vouchers (Article 21 of Appendix I).
8 | For guarantee not required for certain public bodies.
9 | For individual guarantee of the type under point 3 of Annex I to Appendix I.
A | For guarantee waiver by agreement (Article 10(2)(a) of the procedure as defined in the table below.
Field 5 shall be filled with a value that is a check digit for the whole MRN. This field allows for detection of an error when capturing the whole MRN.
Codes to be used in field 4 Procedure identifier:
Code | Procedure
A | Export only
B | Export and exit summary declaration
C | Exit summary declaration only
D | Re-export notification
E | Dispatch of goods in relationConvention).
R | For guarantee not required for goods carried on the Rhine, the Rhine waterways, the Danube or the Danube waterways (Article 13(1)(b) of Appendix I).
C | For guarantee not required for goods carried by fix transport installations (Article 13(1)(c) of Appendix I).
H | For guarantee not required for goods placed under the transit procedure in accordance with special fiscal territories
J | Transit declaration only
K | Transit declaration and exit summary declaration
L | Transit declaration and entry summary declaration
M | Transit declaration and exit summary declaration and entry summary declaration
P | Proof Article 13(1)(a) of Appendix I.
J | Guarantee not required for the journey between customs office of departure and customs office of transit (Article 10(2)(b) of the customs status of Union goods/Customs goods manifest
R | Import declaration only
S | Import declaration and entry summary declaration
T | Entry summary declaration only
U | Temporary storage declaration
V | Introduction of goods in relation with special fiscal territories
W | Temporary storage declaration and entry summary declaration
Z | Arrival notification
1201002000Type
Convention).
99 03 000 000Guarantee reference:
99 03 069 000GRN
Enter the guarantee reference number.
99 03 070 000Access code
Enter the access code.
99 03 012 000Currency
Using the relevant code, indicate the type of the documententer the currency in which amount to be covered is established.
The codes can be found in the TARIC database.
1201003000Type of package
Enter the Currency code specifying the type of package relevant for writing-off the number of packages.
The codes to be used are:
Package type code as referred to in introductory note 8 number 1.
1201004000Number of packages
Enter the relevant writing-off number of packages.
1201005000Measurement unit and qualifier
Enter the relevant writing-off measurement unit and qualifier.
The codes and their formats 2.
99 03 071 000Amount to be used are:
The measurement units and qualifiers defined in TARIC shall be used. In such case, the format of the measurement units and qualifiers shall be an..4, but shall never be n..4 formats, reserved for national measurement units and qualifiers.
If no such measurement units and qualifiers are available in TARIC, national measurement units and qualifiers may be used. Their format shall be n..4.
1201006000Quantity
covered
Enter the relevant writing-off quantity.
1201007000Goods item identifier
Enter the goods item number as declared in the Previous document.
1201079000Complement of information
Enter complementary information concerning the Previous document.
This data element allows the economic operator to provide any complementary information related to the Previous document.
1202000000Additional information:
Use this data element in relation to information for which Contracting Parties’ legislation does not specify the field in which it is to be entered.
1202008000Code
Enter the relevant code, and, if applicable, the code provided for by the country concerned.
The codes and their formats to be used are:
A five-digit code is used to encode additional information of a amount of customs nature:
Code 0xxxx - General category
Code 2xxxx - On transit
The codes ‘00200’, ‘20100’, ‘20200’ and ‘20300’ are used in case of paper-based and electronic transit declarations, if applicable.
Code | Legal basis | Subject | Additional information
00200 | Annex A1a, Title III | Several occurrences of documents and parties | ‘Various’
20100 | Article 18 of the Convention | Export from one Contracting Party or from the Union subject to restriction |
20200 | Article 18 of the Convention | Export from one Contracting Party or from the Union subject to duties |
20300 | Article 18 of the Convention | Export | ‘Export’
Countries may define national codes.
National codes must have the format a1an4.
1202009000Text
Any explanatory text for the declared code may be provided if necessary.
1203000000Supporting document
1203001000Reference number
Identification or reference number of Contracting Parties' or international documents or certificates produced in support of the declaration.
Using the relevant codes, enter the details required by any specific rules applicable together with reference data of the documents produced in support of the declaration.
Identification or reference number of national documents or certificates produced in support of the declaration.
1203002000Type
Using the relevant codes, indicate the type of the document.
Enter the details related debt that can incur or has incurred in relation to the writing-off of the goods declared in the particular declaration concerned, in relation with the export and import licences and certificates.
The codes and their formats , thus to be used are:
Contracting Parties’ or international documents, certificates and authorisations produced in support of the transit declaration, must be entered in the format a1an3. The list of documents, certificates and authorisations, and their respective codes can be found in the TARIC database.
National documents, certificates and authorisations produced in support of the transit declaration, must be entered in the format n1an3 (Ex: 2123, 34d5). The four characters represent codes based on that country’s own nomenclature.
1203013000Document line item number:
Enter the sequential number of the item in the supporting document (e.g. certificate, licence, permit, entry document etc.), corresponding to the item in question.
1203079000Complement of information
Enter complementary information concerning the Supporting document.
This data element allows the economic operator to provide any complementary information related to the Supporting document.
1204000000Additional reference
1204001000Reference number
Reference number for any additional declarations made which is not covered by Supporting document, Transport document or Additional information.
1204002000Type
Using the relevant codes, enter the details required by any specific rules applicable.
The codes and their formats to be used are:
Contracting Parties’ codes for Additional references must be entered in the format a1an3. The list of additional references and their respective codes can be found in the TARIC database.
Countries may define national codes. National Additional the guarantee.
99 04 000 000Specific guarantee reference codes must be entered in the format n1an3, possibly followed either by an identification number or another recognisable reference. The four characters represent codes based on that country’s own nomenclature.
1205000000Transport document
This
All relevant data element includes the type and reference of the transport document.
1205001000Reference number
For column D3:
This data element includes the reference of the transport document that is requirements table columns used as transit declaration.
1205002000Type
Using the relevant codes, indicate the type of the document.
The codes to be used are:
The codes can be found in the TARIC database.
1208000000Reference number/UCR
This entry concerns the unique consignment :
Enter the guarantee reference number assigned by the person concerned to the consignment in question.
It may take the form of WCO (ISO 15459) codes or equivalent. It provides access to underlying commercial data of interest to customs.
1209000000LRN
The local reference number (LRN) shall be used. It is nationally defined and allocated by the declarant in agreement with the competent authorities to identify each single declaration.
1212000000Authorisation
1212001000Reference number
Enter the reference number of all authorisations necessary for the declaration and notification.
1212002000Type
Using the relevant codes, indicate the type of the document.
The codes to be used are:
The codes can be found in the TARIC database.other than Guarantee Reference Number (GRN).