, Convention between the European Economic Community, the Republic of Austria, the Republi…

In forcesince 1 Feb 2025

16 03 000 000Country of destination

Using the relevant code, enter the last country of destination of the goods.

The country of last known destination is defined as the last country to which it is known at the time of release into the customs procedure that the goods are to be delivered.

The codes to be used are:

Country Code as referred to in introductory note 8 number 3.

For common transit countries - the code XI is optional.

16 06 000 000Country of dispatch

Using the relevant code, enter the country from which the goods are dispatched/exported or where the transit movement started and the transit declaration was submitted.***

The codes to be used are:

Country Code as referred to in introductory note 8 number 3.

16 12 000 000Country of routing of the consignment

This data element is required when a prescribed itinerary is defined by the customs office of departure (see 16 17 000 000 Prescribed itinerary). ***

Identification in a chronological order of the countries through which the goods are routed between the country of departure and destination. This comprises also the countries of departure and of destination of the goods.

16 12 020 000Country

Enter the relevant country code(s) in correct sequence of the routing of the consignment.

The codes to be used are:

Country Code as referred to in introductory note 8 number 3.

16 13 000 000Place of loading

Identification of the seaport, airport, freight terminal, rail station or other place at which the goods are loaded onto the means of transport being used for their carriage, including the country where it is located. Where available, coded information shall be provided for the identification of the location.

In case there is no UN/LOCODE available for the location concerned, the country code shall be followed by the name of the place, with the maximum level of precision available.

16 13 020 000Country

Where the UN/LOCODE is not available, enter the country code for the place at which the goods are loaded onto the means of transport being used to cross the frontier of the Contracting Party.

The codes to be used are:

Where the place of loading is not coded according to the UN/LOCODE, the country where the place of loading is located is identified by the Country Code as referred to in introductory note 8 number 3.

16 13 036 000UN/LOCODE

Enter the UN/LOCODE for the place at which the goods are loaded onto the means of transport being used for their carriage to cross the frontier of the Contracting Party.

The codes to be used are:

UN/LOCODE as referred to in introductory note 8 number 4.

16 13 037 000Location

Where the UN/LOCODE is not available, enter the name of the place at which the goods are loaded onto the means of transport being used for their carriage to cross the frontier of the Contracting Party.

16 15 000 000Location of goods

Using the relevant codes, enter the location where the goods may be examined. This location shall be precise enough to allow customs to carry out the physical control of the goods.

Only one Type of location is to be used at the same time.

16 15 036 000UN/LOCODE

Use the codes defined in the UN/LOCODE Code List by Country.

The codes to be used are:

UN/LOCODE as referred to in introductory note 8 number 4.

16 15 045 000Type of location

Enter the relevant code specified for type of location.

The codes to be used are:

For the type of location, use the codes specified below:

A | Designated location

B | Authorised place

C | Approved place

D | Other

16 15 046 000Qualifier of identification

Enter the relevant code for the identification of the location. Based on the used qualifier only the relevant identifier shall be provided.

The codes to be used are:

For the identification of the location, use one of the identifiers below:

Qualifier | Identifier | Description

T | Postcode address | Use the postal code with or without house number for the location concerned.

U | UN/LOCODE | UN/LOCODE as referred to in introductory note 8 number 4.

V | Customs office identifier | Use the codes specified under D.E. 17 05 001 000 Customs office of destination/Reference number.

W | GNSS coordinates |

Decimal degrees with negative numbers for South and West.

Examples: 44.424896°/8.774792° or 50.838068°/ 4.381508°

X | EORI number | The identification number as defined for D.E. 13 02 017 000 Consignor/Identification number shall be used. In case the economic operator has more than one premises, the number shall be completed by an identifier unique for the location concerned.

Y | Authorisation number | Enter the authorisation number of the location concerned, i.e. authorisation for the status of authorised consignor. In case the authorisation concerns more than one premises, the authorisation number shall be completed by an identifier unique for the location concerned.

Z | Address | Enter the address of the location concerned.

In case code ‘X’ (EORI number) or ‘Y’ (authorisation number) is used for the identification of the location, and there are several locations associated with the EORI number or the authorisation number concerned, an additional identifier can be used to enable the unambiguous identification of the location.

16 15 047 000Customs office

Enter the relevant customs office code where goods are available for further customs control.

16 15 047 001Reference number

Using the relevant code, enter the reference number of the customs office where the goods are available for further customs control.

The codes to be used are:

The identifier of the customs office shall follow the structure defined for D.E. 17 05 001 000 Customs office of destination/Reference number.

16 15 048 000GNSS

Enter relevant coordinates from Global Navigation Satellite Systems (GNSS) where goods are available.

16 15 048 049Latitude

Enter the latitude of the location where the goods are available.

16 15 048 050Longitude

Enter the longitude of the location where the goods are available.

16 15 051 000Economic operator

Use the identification number of the economic operator in whose premises the goods can be controlled.

16 15 051 017Identification number

Enter the EORI number or the trader identification number in a common transit country of the holder of the authorisation.

The codes to be used are:

The identification number as defined for D.E. 13 02 017 000 Consignor/Identification number shall be used.

16 15 052 000Authorisation number

Enter the authorization number of the location concerned.

16 15 053 000Additional identifier

In case of several premises, in order the location to be specified more precisely related to an EORI, a trader identification in a common transit country or an authorisation, enter the relevant code where available.

16 15 018 000Address:

16 15 018 019Street and number

Enter the relevant street and number.

16 15 018 020Country

Enter the code of the country.

The codes to be used are:

Country Code as referred to in introductory note 8 number 3.

16 15 018 021Postcode

Enter the relevant postcode for the related address particulars.

16 15 018 022City

Enter the city name of the party’s address.

16 15 081 000Postcode address

This sub class may be used where it is possible to determine the location of the goods with the postcode complemented by the house number if necessary.

16 15 081 020Country

Enter the code of the country.

The codes to be used are:

Country Code as referred to in introductory note 8 number 3.

16 15 081 021Postcode

Enter the relevant postcode for the related location of goods.

16 15 081 025House number

Enter the house number for the related location of goods.

16 15 074 000Contact person

16 15 074 016Name

Enter the name of the contact person.

16 15 074 075Phone number

Enter the phone number of the contact person.

16 15 074 076E-mail address

Enter the e-mail address of the contact person.

16 17 000 000Prescribed itinerary***

Using the relevant codes, indicate if the Prescribed itinerary is applied.

Prescribed itinerary defines the route along which the goods shall be moved from the customs office of departure to the customs office of destination along an economically justified itinerary.

The codes to be used are:

The relevant codes are given below:

0 | Goods do not have to be moved from the customs office of departure to the customs office of destination along a prescribed itinerary

1 | Goods shall be moved from the customs office of departure to the customs office of destination along a prescribed itinerary

Changed on 1 Feb 2025

Symbol | Symbol description A | Mandatory: data required by every16 03 000 000Country of destination Using the relevant code, enter the last country without prejudice to of destination of the goods. The country of last known destination is defined as the last country to which it is known at the time of release into the customs procedure that the goods are to be delivered. The codes to be used are: Country Code as referred to in introductory note 3. B | Optional for the countries: 8 number 3. For common transit countries - the code XI is optional. 16 06 000 000Country of dispatch Using the relevant code, enter the country from which the goods are dispatched/exported or where the transit movement started and the transit declaration was submitted.*** The codes to be used are: Country Code as referred to in introductory note 8 number 3. 16 12 000 000Country of routing of the consignment This data that element is required when a prescribed itinerary is defined by the customs office of departure (see 16 17 000 000 Prescribed itinerary). *** Identification in a chronological order of the countries may decide to waive. C | Optional for economic operators: data which economic operators may decide to supply but through which the goods are routed between the country of departure and destination. This comprises also the countries of departure and of destination of the goods. 16 12 020 000Country Enter the relevant country code(s) in correct sequence of the routing of the consignment. The codes to be used are: Country Code as referred to in introductory note 8 number 3. 16 13 000 000Place of loading Identification of the seaport, airport, freight terminal, rail station or other place at which cannot be demanded the goods are loaded onto the means of transport being used for their carriage, including the country where it is located. Where available, coded information shall be provided for the identification of the location. In case there is no UN/LOCODE available for the location concerned, the country code shall be followed by the countries. name of the place, with the maximum level of precision available. 16 13 020 000Country Where an economic operator decides to supply the information, all required sub elements havethe UN/LOCODE is not available, enter the country code for the place at which the goods are loaded onto the means of transport being used to cross the frontier of the Contracting Party. The codes to be declared.used are: Where ‘C’ is used for a data element/data class all the data sub-elements/data sub-class that belongs to this data element/data class are mandatory where declarant decides to supply the information unless this is specified differently in Title II Chapter I. D | Data element required at the level of the transit declaration header. The data elements of the declaration level contain information that applies to the entire declaration. MC | Data element required the place of loading is not coded according to the UN/LOCODE, the country where the place of loading is located is identified by the Country Code as referred to in introductory note 8 number 3. 16 13 036 000UN/LOCODE Enter the UN/LOCODE for the place at which the goods are loaded onto the means of transport being used for their carriage to cross the frontier of the Contracting Party. The codes to be used are: UN/LOCODE as referred to in introductory note 8 number 4. 16 13 037 000Location Where the UN/LOCODE is not available, enter the name of the place at which the goods are loaded onto the means of transport being used for their carriage to cross the frontier of the Contracting Party. 16 15 000 000Location of goods Using the relevant codes, enter the location where the goods may be examined. This location shall be precise enough to allow customs to carry out the physical control of the goods. Only one Type of location is to be used at the Master Consignment levelsame time. 16 15 036 000UN/LOCODE Use the codes defined in the UN/LOCODE Code List by Country. The data elements of the Master consignment level contain information that applies to a transport contract issued by a carrier and direct contracting party. This header information is applicable for every Master Consignment Item in case of declarations and notifications codes to be used are: UN/LOCODE as referred to in introductory note 8 number 4. 16 15 045 000Type of location Enter the relevant code specified for type of location. The codes to be used are: For the type of location, use the codes specified below: A | Designated location B | Authorised place C | Approved place D | Other 16 15 046 000Qualifier of identification Enter the relevant code for the identification of the location. Based on the used qualifier only the relevant identifier shall be provided. The codes to be used are: For the identification of the location, use one of the identifiers below: Qualifier | Identifier | Description T | Postcode address | Use the postal code with or without house number for the location concerned. U | UN/LOCODE | UN/LOCODE as referred to in Title II Chapter I. HC | Data element required at the House Consignment level. The data elements introductory note 8 number 4. V | Customs office identifier | Use the codes specified under D.E. 17 05 001 000 Customs office of destination/Reference number. W | GNSS coordinates | Decimal degrees with negative numbers for South and West. Examples: 44.424896°/8.774792° or 50.838068°/ 4.381508° X | EORI number | The identification number as defined for D.E. 13 02 017 000 Consignor/Identification number shall be used. In case the economic operator has more than one premises, the number shall be completed by an identifier unique for the location concerned. Y | Authorisation number | Enter the authorisation number of the House consignment level contains information that applies to the lowest transport contract issued by a freight forwarder, non-vessel or aircraft operating common carrier or his agent or a postal operator. This header information is valid for every House Consignment Item in case of declarations and notifications referred to in Title II Chapter I. HI | Data element required at the House Consignment Goods Item level. The House consignment location concerned, i.e. authorisation for the status of authorised consignor. In case the authorisation concerns more than one premises, the authorisation number shall be completed by an identifier unique for the location concerned. Z | Address | Enter the address of the location concerned. In case code ‘X’ (EORI number) or ‘Y’ (authorisation number) is used for the identification of the location, and there are several locations associated with the EORI number or the authorisation number concerned, an additional identifier can be used to enable the unambiguous identification of the location. 16 15 047 000Customs office Enter the relevant customs office code where goods are available for further customs control. 16 15 047 001Reference number Using the relevant code, enter the reference number of the customs office where the goods are available for further customs control. The codes to be used are: The identifier of the customs office shall follow the structure defined for D.E. 17 05 001 000 Customs office of destination/Reference number. 16 15 048 000GNSS Enter relevant coordinates from Global Navigation Satellite Systems (GNSS) where goods are available. 16 15 048 049Latitude Enter the latitude of the location where the goods are available. 16 15 048 050Longitude Enter the longitude of the location where the goods item level is a sub-level to the House consignment level. The data elements are available. 16 15 051 000Economic operator Use the identification number of the economic operator in whose premises the goods can be controlled. 16 15 051 017Identification number Enter the EORI number or the trader identification number in a common transit country of the holder of the authorisation. The codes to be used are: The identification number as defined for D.E. 13 02 017 000 Consignor/Identification number shall be used. 16 15 052 000Authorisation number Enter the authorization number of the House consignment item level contain information that originate from different positions in the transport document location concerned. 16 15 053 000Additional identifier In case of several premises, in order the location to be specified more precisely related to an EORI, a trader identification in a common transit country or an authorisation, enter the relevant code where available. 16 15 018 000Address: 16 15 018 019Street and number Enter the relevant street and number. 16 15 018 020Country Enter the code of the country. The codes to be used are: Country Code as referred to in the current House consignment. introductory note 8 number 3. 16 15 018 021Postcode Enter the relevant postcode for the related address particulars. 16 15 018 022City Enter the city name of the party’s address. 16 15 081 000Postcode address This Item information is applicable in case of declarations and notifications sub class may be used where it is possible to determine the location of the goods with the postcode complemented by the house number if necessary. 16 15 081 020Country Enter the code of the country. The codes to be used are: Country Code as referred to in Title II Chapter I.introductory note 8 number 3. 16 15 081 021Postcode Enter the relevant postcode for the related location of goods. 16 15 081 025House number Enter the house number for the related location of goods. 16 15 074 000Contact person 16 15 074 016Name Enter the name of the contact person. 16 15 074 075Phone number Enter the phone number of the contact person. 16 15 074 076E-mail address Enter the e-mail address of the contact person. 16 17 000 000Prescribed itinerary*** Using the relevant codes, indicate if the Prescribed itinerary is applied. Prescribed itinerary defines the route along which the goods shall be moved from the customs office of departure to the customs office of destination along an economically justified itinerary. The codes to be used are: The relevant codes are given below: 0 | Goods do not have to be moved from the customs office of departure to the customs office of destination along a prescribed itinerary 1 | Goods shall be moved from the customs office of departure to the customs office of destination along a prescribed itinerary

  1. 1 Feb 2025 – todayin force
  2. 25 Aug 2022 – 20 Oct 2022earlier wording
  3. 1 Jan 2021 – 25 Aug 2022earlier wording
  4. 5 Dec 2017 – 1 Jan 2021earlier wording

Versions are held from 20 May 1987; the article may be older.