, Convention between the European Economic Community, the Republic of Austria, the Republi…

In forcesince 1 Feb 2025

12 01 000 000Previous document

Indicate details relating to the previous document.

For the Member States of the European Union – Enter the details related to the writing-off of the goods declared in the declaration concerned, in relation with the ending of the temporary storage. Such details shall include the writing-off quantity and the respective measurement unit.

12 01 001 000Reference number

Give the reference for the temporary storage or the previous customs procedure or corresponding customs documents.

For the Member States of the European Union – if the export is followed by transit, enter the MRN of the export declaration.

The codes to be used are:

The identification number or another recognisable reference of the document is inserted in Data Element 12 01 001 000.

In case the MRN is referred to as previous document, the reference number shall have the following structure:

Field | Content | Format | Examples

1 | Last two digits of year of formal acceptance of the declaration (YY) | n2 | 21

2 | Identifier of the country where the declaration / notification is lodged (Country Code as referred to in introductory note 8 number 3) | a2 | RO

3 | Unique identifier for message per year and country | an 12 | 9876AB889012

4 | Procedure identifier | a1 | B

5 | Check digit | an1 | 1

Fields 1 and 2 as explained above.

Field 3 shall be filled in with an identifier for the message concerned. The way that field is used is under the responsibility of national administrations but each message handled during one year within the given country must have a unique number in relation to the procedure concerned.

National administrations that want to have the reference number of the competent customs office included in the MRN, may use up to the first 6 characters to represent it.

Field 4 shall be filled in with an identifier of the procedure as defined in the table below.

Field 5 shall be filled with a value that is a check digit for the whole MRN. This field allows for detection of an error when capturing the whole MRN.

Codes to be used in field 4 Procedure identifier:

Code | Procedure

A | Export only

B | Export and exit summary declaration

C | Exit summary declaration only

D | Re-export notification

E | Dispatch of goods in relation with special fiscal territories

J | Transit declaration only

K | Transit declaration and exit summary declaration

L | Transit declaration and entry summary declaration

M | Transit declaration and exit summary declaration and entry summary declaration

P | Proof of the customs status of Union goods/Customs goods manifest

R | Import declaration only

S | Import declaration and entry summary declaration

T | Entry summary declaration only

U | Temporary storage declaration

V | Introduction of goods in relation with special fiscal territories

W | Temporary storage declaration and entry summary declaration

Z | Arrival notification

12 01 002 000Type

Using the relevant code, indicate the type of the document.

The codes to be used are:

The codes can be found in the TARIC database.

12 01 003 000Type of package

Enter the code specifying the type of package relevant for writing-off the number of packages.

The codes to be used are:

Package type code as referred to in introductory note 8 number 1.

12 01 004 000Number of packages

Enter the relevant writing-off number of packages.

12 01 005 000Measurement unit and qualifier

Enter the relevant writing-off measurement unit and qualifier.

The codes and their formats to be used are:

The measurement units and qualifiers defined in TARIC shall be used. In such case, the format of the measurement units and qualifiers shall be an..4, but shall never be n..4 formats, reserved for national measurement units and qualifiers.

If no such measurement units and qualifiers are available in TARIC, national measurement units and qualifiers may be used. Their format shall be n..4.

12 01 006 000Quantity

Enter the relevant writing-off quantity.

12 01 007 000Goods item identifier °°°Goods item number***

Enter the goods item number as declared in the Previous document.

12 01 079 000Complement of information

Enter complementary information concerning the Previous document.

This data element allows the economic operator to provide any complementary information related to the Previous document.

12 02 000 000Additional information:

Use this data element in relation to information for which Contracting Parties’ legislationdoes not specify the field in which it is to be entered.

12 02 008 000Code

Enter the relevant code, and, if applicable, the code provided for by the country concerned.

The codes and their formats to be used are:

A five-digit code is used to encode additional information of a customs nature:

Code 0xxxx - General category

Code 2xxxx - On transit

The codes ‘00200’, ‘20100’, ‘20200’ and ‘20300’ are used in case of paper-based and electronic transit declarations, if applicable.

Code | Legal basis | Subject | Additional information

00200 | Annex A1a, Title III | Several occurrences of documents and parties | ‘Various’

20100 | Article 18 of the Convention | Export from one Contracting Party or from the Union subject to restriction |

20200 | Article 18 of the Convention | Export from one Contracting Party or from the Union subject to duties |

20300 | Article 18 of the Convention | Export | ‘Export’

Countries may define national codes.

National codes must have the format a1an4.

12 02 009 000Text

Any explanatory text for the declared code may be provided if necessary.

12 03 000 000Supporting document

12 03 001 000Reference number

Identification or reference number of Contracting Parties’ or international documents or certificates produced in support of the declaration.

Using the relevant codes, enter the details required by any specific rules applicable together with reference data of the documents produced in support of the declaration.

Identification or reference number of national documents or certificates produced in support of the declaration.

12 03 002 000Type

Using the relevant codes, indicate the type of the document.

Enter the details related to the writing-off of the goods declared in the declaration concerned, in relation with the export and import licences and certificates.

The codes and their formats to be used are:

Contracting Parties’ or international documents, certificates and authorisations produced in support of the transit declaration, must be entered in the format a1an3. The list of documents, certificates and authorisations, and their respective codes can be found in the TARIC database.

National documents, certificates and authorisations produced in support of the transit declaration, must be entered in the format n1an3. The four characters represent codes based on that country’s own nomenclature.

12 03 013 000Document line-item number:

Enter the sequential number of the item in the supporting document (e.g. certificate, licence, permit, entry document etc.), corresponding to the item in question.

12 03 079 000Complement of information

Enter complementary information concerning the Supporting document.

This data element allows the economic operator to provide any complementary information related to the Supporting document.

12 04 000 000Additional reference

12 04 001 000Reference number

Reference number or another recognisable reference number which is not covered by Supporting document, Transport document or Additional information.

12 04 002 000Type

Using the relevant codes, enter the details required by any specific rules applicable.

The codes and their formats to be used are:

Contracting Parties’ codes for Additional references must be entered in the format a1an3. The list of additional references and their respective codes can be found in the TARIC database.

Countries may define national codes. National Additional reference codes must be entered in the format n1an3, possibly followed either by an identification number or another recognisable reference. The four characters represent codes based on that country’s own nomenclature.

12 05 000 000Transport document

This data element includes the type and reference of the transport document.

12 05 001 000Reference number

Data requirements table column D1 and D2:

This data element includes the reference to the transport document(s) that covers the transport of goods when they are in transit.

For column D3:

This data element includes the reference of the transport document that is used as transit declaration.

12 05 002 000Type

Using the relevant codes, indicate the type of the document.

The codes to be used are:

The codes can be found in the TARIC database.

12 08 000 000Reference number/UCR

This entry concerns the unique consignment reference number assigned by the person concerned to the consignment in question.

It may take the form of WCO (ISO 15459) codes or equivalent. It provides access to underlying commercial data of interest to customs.

12 09 000 000LRN

The local reference number (LRN) shall be used. It is nationally defined and allocated by the declarant in agreement with the competent authorities to identify each single declaration.

12 12 000 000Authorisation

12 12 001 000Reference number

Enter the reference number of all authorisations necessary for the declaration and notification.

12 12 002 000Type

Using the relevant codes, indicate the type of the document.

The codes to be used are:

The codes can be found in the TARIC database.