, Convention between the European Economic Community, the Republic of Austria, the Republi…

In forcesince 1 Feb 2025

Note number | Note description

[6] | Where the Economic Operators Registration and Identification (EORI) number or a common transit country or third-country unique identification number recognised by the customs office of departure is provided, the name and address shall not be provided.

[7] | The Holder of the transit procedure Identification number is mandatory only in the cases where the EORI number or a third-country unique identification number recognised by the Union of the person concerned is not provided. Where the EORI number or a third-country unique identification number recognised by the Union is provided, the name and address shall not be provided.

[8] | This information shall only be provided where available

[30] | Countries may waive this requirement for modes of transport other than rail in case the transit movement does not cross the external border of the Contracting Parties.

[34] | Not for use in the case of postal consignments or carriage by fixed transport installations.

[35] | Where goods are carried in intermodal transport units, such as, but not limited to, containers, swap bodies and semi trailers, the holder of the transit procedure does not have to provide this information where the logistical pattern at the point of departure may prevent the identity and nationality of the means of transport from being provided at the time the goods are released for transit. The intermodal transport units shall bear unique ID numbers and such numbers are indicated in D.E. 19 07 063 000 Container identification number.

[36] |

In the following cases, countries shall waive the obligation to enter this information on a transit declaration lodged at the customs office of departure in relation with the means of transport on which the goods are directly loaded:

where the logistical pattern does not allow this data element to be provided and the holder of the transit procedure has the AEOC status in the Union or a similar status in a common transit country, and

where the relevant information may be traced where needed by the customs authorities via the records of the holder of the transit procedure.

[60] | This data element is to be provided when an authorisation exists according to Article 55 of Appendix I.

[61] | This data element is optional when the declaration is submitted prior to presentation of goods.

[65] | This information shall only be provided when customs authority decided to seal the goods.

[70] | Not for use in the case there is no customs office of transit (D.E. 17 04 000 000) declared.

[71] | This information shall not be provided if it is the same as the Departure transport means (D.E. 19 05 000 000).

[75] | For completion only where Contracting Parties’ legislation so provides.

[82] | This information shall be provided only when an authorised consignor is used for the declaration concerned

Changed on 1 Feb 2025

1703000000Customs office of departure 1703001000Reference number Using the relevant code, enter the reference number of the office where the transit operation shall start. The codes to be used are: The identifier of Note number | Note description [6] | Where the Economic Operators Registration and Identification (EORI) number or a common transit country or third-country unique identification number recognised by the customs office shall follow the structure defined for D.E. 1705001000 Customs office of destination/Reference number. 1704000000Customs office of of departure is provided, the name and address shall not be provided. [7] | The Holder of the transit 1704001000Reference procedure Identification number Enter the code for the intended customs office competent for the point of entry into the territory of a Contracting Party when the goods move under the transit procedure, or the customs office competent for the point of exit from the territory of a Contracting Party when the goods are leaving that territory in the course of a transit operation via a frontier between that Contracting Party and a third country. Using the relevant code, enter the reference number is mandatory only in the cases where the EORI number or a third-country unique identification number recognised by the Union of the person concerned is not provided. Where the EORI number or a third-country unique identification number recognised by the Union is provided, the name and address shall not be provided. [8] | This information shall only be provided where available [30] | Countries may waive this requirement for modes of transport other than rail in case the transit movement does not cross the external border of the custom office concerned. The codes to be used are: The identifier of the customs office shall follow the structure defined for D.E. 1705001000 Customs office of destination / Reference number. 1705000000Customs office of destination 1705001000Reference number Using the relevant code, enter the reference number Contracting Parties. [34] | Not for use in the case of postal consignments or carriage by fixed transport installations. [35] | Where goods are carried in intermodal transport units, such as, but not limited to, containers, swap bodies and semi trailers, the holder of the office transit procedure does not have to provide this information where the transit operation shall end. The codes and their formats to be used are: Use (an8) codes structured as follows: the first two characters (a2) serve to identify the country by means of the Country Code as referred to in introductory note 8 logistical pattern at the point of departure may prevent the identity and nationality of the means of transport from being provided at the time the goods are released for transit. The intermodal transport units shall bear unique ID numbers and such numbers are indicated in D.E. 19 07 063 000 Container identification number 3, the next six characters (an6) stand for the . [36] | In the following cases, countries shall waive the obligation to enter this information on a transit declaration lodged at the customs office concerned in that country. It is suggested that the following structure be adopted: The first three characters (an3) would be taken up by the UN/LOCODE location name of departure in relation with the means of transport on which the goods are directly loaded: where the logistical pattern does not allow this data element to be provided and the last three by a national alphanumeric subdivision (an3). If this subdivision is not used, the characters ‘000’ should be inserted. Example: BEBRU000: BE = ISO 3166 for Belgium, BRU = UN/LOCODE location name for the city of Brussels, 000 for the unused subdivision. 1706000000Customs office of exit for transit 1706001000Reference number Using the relevant code, enter the reference number of the office concerned. holder of the transit procedure has the AEOC status in the Union or a similar status in a common transit country, and where the relevant information may be traced where needed by the customs authorities via the records of the holder of the transit procedure. [60] | This data element is to be provided when an authorisation exists according to Article 55 of Appendix I. [61] | This data element is requiredoptional when the transit declaration is combined with exit summary declaration. Enter the code for the intended submitted prior to presentation of goods. [65] | This information shall only be provided when customs authority decided to seal the goods. [70] | Not for use in the case there is no customs office where the of transit movement leaves the safety and security area. For Member States of the European Union – this data element is not required when the transit movement follows the export procedure. The codes to be used are: The identifier of the customs office (D.E. 17 04 000 000) declared. [71] | This information shall not be provided if it is the same as the Departure transport means (D.E. 19 05 000 000). [75] | For completion only where Contracting Parties’ legislation so provides. [82] | This information shall follow the structure defined for D.E. 1705001000 Customs office of destination/Reference number.be provided only when an authorised consignor is used for the declaration concerned

  1. 1 Feb 2025 – todayin force
  2. 20 Oct 2022 – 1 Feb 2025earlier wording
  3. 1 Jan 2021 – 20 Oct 2022earlier wording
  4. 5 Dec 2017 – 1 Jan 2021earlier wording

Versions are held from 20 May 1987; the article may be older.