1603000000Country of destination
Using the relevant code, enter the last country of destination of the goods.
The country of last known destination is defined as the last country to which it is known at the time of release into the customs procedure that the goods are to be delivered.
The codes to be used are:
Country Code as referred to in introductory note 8 number 3.
For common transit countries - the code XI is optional.
1606000000Country of dispatch
Using the relevant code, enter the country from which the goods are dispatched/exported.
The codes to be used are:
Country Code as referred to in introductory note 8 number 3.
1612000000Country of routing of the consignment
This The term ‘type/length’ in the explanation of an attribute indicates the requirements for the data element is required when a prescribed itinerary is defined by the customs office of departure (see 1617000000 Prescribed itinerary).
Identification in a chronological order of the countries through which the goods are routed between the country of departure and destination. This comprises also the countries of departure and of destination of the goods.
1612020000Country
Enter the relevant country code(s) in correct sequence of the routing of the consignment.
type and the data length. The codes to be used are:
Country Code as referred to in introductory note 8 number 3.
1613000000Place of loading
Identification of the seaport, airport, freight terminal, rail station or other place at which the goods are loaded onto the means of transport being used for their carriage, including the country where it is located. Where available, coded information shall be provided for the identification of the location.
In case there is no UN/LOCODE available for the location concerned, the country code shall be followed by the name of the place, with the maximum level of precision available.
1613020000Country
Where the UN/LOCODE is not available, enter the country code for the place at which the goods are loaded onto the means of transport being used to cross the frontier of the Contracting Party.
The codes to be used are:
Where the place of loading is not coded according to the UN/LOCODE, the country where the place of loading is located is identified by the Country Code as referred to in introductory note 8 number 3.
1613036000UN/LOCODE
Enter the UN/LOCODE for the place at which the goods are loaded onto the means of transport being used for their carriage to cross the frontier of the Contracting Party.
The codes to be used are:
UN/LOCODE as referred to in introductory note 8 number 4.
1613037000Location
Where the UN/LOCODE is not available, enter the name of the place at which the goods are loaded onto the means of transport being used for their carriage to cross the frontier of the Contracting Party.
1615000000Location of goods
Using the relevant codes, enter the location where the goods may be examined. This location shall be precise enough to allow customs to carry out the physical control of the goods.
Only one Type of location is to be used at the same time.
1615036000UN/LOCODE
Use the codes defined in the UN/LOCODE Code List by Country.
The codes to be used are:
UN/LOCODE as referred to in introductory note 8 for the data types are as follows:
aalphabetic
nnumeric
analphanumeric
The number 4.
1615045000Type of location
Enter the relevant following the code specified for type of location.
The codes to be used are:
For the type of location, use the codes specified below:
A | Designated location
B | Authorised place
C | Approved place
D | Other
1615046000Qualifier of identification
Enter the relevant code for the identification of the location. Based on the used qualifier only the relevant identifier shall be providedindicates the admissible data length. The following applies.
The codes to be used are:
For the identification of the location, use one of the identifiers below:
Qualifier | Identifier | Description
T | Postcode address | Use the postal code with or without house number for the location concerned.
U | UN/LOCODE | UN/LOCODE as referred to in introductory note 8 number 4.
V | Customs office identifier | Use the codes specified under D.E. 1705001000 Customs office of destination/Reference number.
W | GNSS coordinates |
Decimal degrees with negative numbers for South and West.
Examples: 44.424896°/8.774792° or 50.838068°/ 4.381508°
X | EORI number | The identification number as defined for D.E. 1302017000 Consignor/Identification number shall be used. In case the economic operator has more than one premises, the number shall be completed by an identifier unique for the location concerned.
Y | Authorisation optional two dots before the length indicator mean that the data has no fixed length, but it can have up to a number | Enter the authorisation number of the location concerned, i.e. authorisation for the status of authorised consignor. In case the authorisation concerns more than one premises, the authorisation number shall be completed by an identifier unique for the location concerned.
Z | Address | Enter the address of the location concerned.
In case code ‘X’ (EORI number) or ‘Y’ (authorisation number) is used for the identification of the location, and there are several locations associated with the EORI number or the authorisation number concerned, an additional identifier can be used to enable the unambiguous identificationof digits, as specified by the length indicator. A comma in the data length means that the attribute can hold decimals, the digit before the comma indicates the total length of the location.
1615047000Customs office
Enter the relevant customs office code where goods are available for further customs control.
1615047001Reference number
Using the relevant code, enter the reference number of the customs office where the goods are available for further customs control.
The codes to be used are:
The identifier of the customs office shall follow the structure defined for D.E. 1705001000 Customs office of destination/Reference attribute, the digit after the comma indicates the maximum number.
1615048000GNSS
Enter relevant coordinates from Global Navigation Satellite Systems (GNSS) where goods are available.
1615048049Latitude
Enter the latitude of the location where the goods are available.
1615048050Longitude
Enter the longitude of the location where the goods are available.
1615051000Economic operator
Use the identification number of the economic operator in whose premises the goods can be controlled.
1615051017Identification number
Enter the EORI number or the trader identification number in a common transit country of the holder of the authorisation.
The codes to be used are:
The identification number as defined for D.E. 1302017000 Consignor/Identification number shall be used.
1615052000Authorisation number
Enter the authorization number of the location concerned.
1615053000Additional identifier
In case of several premises, in order the location to be specified more precisely related to an EORI, a trader identification in a common transit country or an authorisation, enter the relevant code where available.
1615018000Address:
1615018019Street and number
Enter the relevant street and number.
1615018020Country
Enter the code of the country.
The codes to be used are:
Country Code as referred to in introductory note 8 number 3.
1615018021Postcode
Enter the relevant postcode for the related address particulars.
1615018022City
Enter the city name of the party’s address.
1615081000Postcode address
This sub class may be used where it is possible to determine the location of the goods with the postcode complemented by the house number if necessary.
1615081020Country
Enter the code of the country.
The codes to be used are:
Country Code as referred to in introductory note 8 number 3.
1615081021Postcode
Enter the relevant postcode for the related location of goods.
1615081025House number
Enter the house number for the related location of goods.
1615074000Contact person
1615074016Name
Enter the name of the contact person.
1615074075Phone number
Enter the phone number of the contact person.
1615074076E-mail address
Enter the e-mail address of the contact person.
1617000000Prescribed itinerary
Using the relevant codes, indicate if the Prescribed itinerary is applied.
Prescribed itinerary defines the route along which the goods shall be moved from the customs office of departure to the customs office of destination along an economically justified itinerary.
The codes to be used are:
The relevant codes are given below:
0 | Goods do not have to be moved from the customs office of departure to the customs office of destination along a prescribed itinerary
1 | Goods shall be moved from the customs office of departure to the customs office of destination along a prescribed itinerary of digits after the decimal point.
Examples of field lengths and formats:
a11 alphabetic character, fixed length
n22 numeric characters, fixed length
an33 alphanumeric characters, fixed length
a..4up to 4 alphabetic characters
n..5up to 5 numeric characters
an..6up to 6 alphanumeric characters
n..7,2up to 7 numeric characters including maximum 2 decimals, a delimiter being allowed to float.