, Convention between the European Economic Community, the Republic of Austria, the Republi…

In forcesince 1 Feb 2025

Introductory notes to the data requirements table

(1)

The data elements, formats and codes, and, if applicable, the structure of the data elements, as defined in this Annex, shall apply to transit declarations made by using an electronic data processing technique as well as to paper-based declarations.

(2)

The data elements which may be provided for each transit procedure and the formats of the data elements are set out in the data requirements table in Title II. The specific provisions concerning each data element as they are set out in Title III apply without prejudice to the status of the data elements as defined in the data requirements table.

The data elements are listed in the order of their data element number.

(3)

The ‘A’, ‘B’ or ‘C’ symbols in the table in Title II have no bearing on the fact that certain data is collected only where circumstances warrant it. For example, the D.E. 18 09 057 000 Combined Nomenclature code (status ‘A’) will only be collected where required by the Contracting Parties’ legislation.

They may be complemented by conditions or clarifications listed in the numbered notes attached to the data requirements in Title II, Chapter II, and in the notes of Title III.

(4)

Without affecting in any way the obligations to provide data in accordance with this Annex and without prejudice to Article 29 of Appendix I, the content of the data provided to customs for a given data requirement will be based on the information as it is known by the economic operator that provides it at the time it is provided to Customs.

(5)

Whenever the information in a transit declaration dealt with in this Annex takes the form of codes, the code-list provided for in Title III or national codes, where foreseen, shall be applied.

(6)

National codes may be used by the countries for data elements: 12 01 000 000 Previous document (sub-element 12 01 002 000 Type and sub-element 12 01 005 000 Measurement unit and qualifier), 12 02 000 000 Additional information (sub-element 12 02 008 000 Code), 12 03 000 000 Supporting document (sub-elements 12 03 002 000 Type), 12 04 000 000 Additional reference (sub-element 12 04 002 000 Type), certificates and authorisations.

For Member States of the European Union, they shall notify the Commission of the list of national codes used for these data elements. The Commission shall publish the list of those codes.

(7)

Maximum cardinalities for each transit procedure:

D1x

MC1x (per declaration header)

HC999x (per MC for transit)

HI9,999x (per HC)

(8)

The following references to code lists defined in international standards or in the Contracting Parties’ legal acts are used:

Short name | Source | Definition

1.

| Package Type Code | UN/ECE Recommendation 21 | Package Type Code as defined in the latest version of Annex IV to UN/ECE Recommendation 21

2.

| Currency Code | ISO 4217 | Three-letter alphabetic code defined by International Standard ISO 4217

3.

| Country Code | ISO 3166- alpha-2 country code | In the context of transit operations, the ISO 3166- alpha-2 country code shall be used, and the code ‘XI’ shall be used for Northern Ireland

4.

| UN/LOCODE | UNECE Recommendation No. 16 | UN/LOCODE as defined in UNECE Recommendation No. 16

6.

| Code for Types of Means of Transport | UNECE Recommendation No. 28 | Code for types of means of transport as defined in UNECE Recommendation No. 28

9.

| CUS codes | ECICS (European Customs Inventory of Chemical Substances) | Customs Union and Statistics (CUS) number assigned within the European Customs Inventory of Chemical Substances (ECICS) to mainly chemical substances and preparations.

(9)

The codes as specified in Title III that can be found in the TARIC database shall be defined in common agreement with the Contracting Parties.