, Agreement between the European Economic Community and the Kingdom of Norway - Protocol N…

In forcesince 1 Sep 2021

8.1. For the purposes of headings ex2707 and 2713, the ‘specific processes’ are the following:

(a)

vacuum-distillation;

(b)

redistillation by a very thorough fractionation process;

(c)

cracking;

(d)

reforming;

(e)

extraction by means of selective solvents;

(f)

the process comprising all of the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite;

(g)

polymerisation;

(h)

alkylation;

(i)

isomerisation.

8.2. For the purposes of headings 2710, 2711 and 2712, the ‘specific processes’ are the following:

(a)

vacuum-distillation;

(b)

redistillation by a very thorough fractionation process;

(c)

cracking;

(d)

reforming;

(e)

extraction by means of selective solvents;

(f)

the process comprising all of the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite;

(g)

polymerisation;

(h)

alkylation;

(i)

isomerisation;

(j)

in respect of heavy oils of heading ex2710 only, desulphurisation with hydrogen, resulting in a reduction of at least 85 % of the sulphur content of the products processed (ASTM D 1266-59 T method);

(k)

in respect of products of heading 2710 only, deparaffining by a process other than filtering;

(l)

in respect of heavy oils of heading ex2710 only, treatment with hydrogen, at a pressure of more than 20 bar and a temperature of more than 250 °C, with the use of a catalyst, other than to effect desulphurisation, when the hydrogen constitutes an active element in a chemical reaction. The further treatment, with hydrogen, of lubricating oils of heading ex2710 (e.g. hydrofinishing or decolourisation), in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process;

(m)

in respect of fuel oils of heading ex2710 only, atmospheric distillation, on condition that less than 30 % of these products distils, by volume, including losses, at 300 °C, by the ASTM D 86 method;

(n)

in respect of heavy oils other than gas oils and fuel oils of heading ex2710 only, treatment by means of a high-frequency electrical brush discharge;

(o)

in respect of crude products (other than petroleum jelly, ozokerite, lignite wax or peat wax, paraffin wax containing by weight less than 0,75 % of oil) of heading ex2712 only, de-oiling by fractional crystallisation.

8.3. For the purposes of headings ex2707 and 2713, simple operations, such as cleaning, decanting, desalting, water separation, filtering, colouring, marking, obtaining a sulphur content as a result of mixing products with different sulphur contents, or any combination of those operations or like operations, do not confer origin.

Changed on 1 Sep 2021

Ο εξαγωγέας των προϊόντων που καλύπτονται από το παρόν έγγραφο [άδεια τελωνείου υπ' αριθ. ... [When the invoice declaration is made out by an approved exporter, the authorisation number 8.1. For the purposes of headings ex2707 and 2713, the ‘specific processes’ are the following: (a) vacuum-distillation; (b) redistillation by a very thorough fractionation process; (c) cracking; (d) reforming; (e) extraction by means of selective solvents; (f) the process comprising all of the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite; (g) polymerisation; (h) alkylation; (i) isomerisation. 8.2. For the purposes of headings 2710, 2711 and 2712, the ‘specific processes’ are the following: (a) vacuum-distillation; (b) redistillation by a very thorough fractionation process; (c) cracking; (d) reforming; (e) extraction by means of selective solvents; (f) the process comprising all of the approved exporter must be entered in this space. When the invoice declaration is not made out by an approved exporter, the words in brackets shall be omitted or the space left blank.]] δηλώνει ότι, εκτός εάν δηλώνεται σαφώς άλλως, τα προϊόντα αυτά είναι προτιμησιακής καταγωγής ... [Origin of products to be indicated. When the invoice declaration relates in whole or in part, to products originating in Ceuta and Melilla, the exporter must clearly indicate them in the document on which the declaration is made out, following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite; (g) polymerisation; (h) alkylation; (i) isomerisation; (j) in respect of heavy oils of heading ex2710 only, desulphurisation with hydrogen, resulting in a reduction of at least 85 % of the sulphur content of the products processed (ASTM D 1266-59 T method); (k) in respect of products of heading 2710 only, deparaffining by a process other than filtering; (l) in respect of heavy oils of heading ex2710 only, treatment with hydrogen, at a pressure of more than 20 bar and a temperature of more than 250 °C, with the use of a catalyst, other than to effect desulphurisation, when the hydrogen constitutes an active element in a chemical reaction. The further treatment, with hydrogen, of lubricating oils of heading ex2710 (e.g. hydrofinishing or decolourisation), in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process; (m) in respect of fuel oils of heading ex2710 only, atmospheric distillation, on condition that less than 30 % of these products distils, by volume, including losses, at 300 °C, by the ASTM D 86 method; (n) in respect of heavy oils other than gas oils and fuel oils of heading ex2710 only, treatment by means of the symbol ‘CM’.].a high-frequency electrical brush discharge; (o) in respect of crude products (other than petroleum jelly, ozokerite, lignite wax or peat wax, paraffin wax containing by weight less than 0,75 % of oil) of heading ex2712 only, de-oiling by fractional crystallisation. 8.3. For the purposes of headings ex2707 and 2713, simple operations, such as cleaning, decanting, desalting, water separation, filtering, colouring, marking, obtaining a sulphur content as a result of mixing products with different sulphur contents, or any combination of those operations or like operations, do not confer origin.

  1. 1 Sep 2021 – todayin force
  2. 1 Jan 2006 – 1 May 2015earlier wording

Versions are held from 14 May 1973; the article may be older.